To scan in Duplex ADF mode, you need to set 2 pages to scan in Xsane.
Otherwise, it will stop at the first page.
Did you try that ?
Nicolas
Le lundi 31 janvier 2011 ? 12:08 +0100, Stephan Ritscher a ?crit :
Hi folks,
I just got a new Canon Pixma MX870, but it doesn't work completely,
yet.
I checked that it currently compiles with gcc 4.4.3, but this statement
gies a warning message telling %llu is not supported.
If this is not advisable to leave PRIu64 here, for compatibility with
all systems, then we will need to remove it.
Nicolas
Le lundi 17 janvier 2011 ? 02:17 +0900,
Hopefully, code and declarations for those 2 old models, MP900 and
MP950, is not part of the git version, probably this is from a test
version you're currently using for debugging.
Those 2 Pixma models are more than 5 years old, so probably not
strategic to have them supported for the next Sane
Well, for all ImageClass MFPs, the maximum width and height scan is
currently set to 640 x 877 pixels at 75 dpi, this corresponds to:
640 / 75 * 2.54 cm = 21,67 cm in width
877 / 75 * 2.54 cm = 29,70 cm in height
Those values are set in the backend, file pixma_imageclass.c, at the end
of the
Hi,
Thanks for this pointer, very interesting and commented
So we have to be double careful when using memcpy though, even if it
acts faster than its cousin memmove !
Nicolas
Le samedi 08 janvier 2011 ? 09:43 +0100, Julien BLACHE a ?crit :
Nicolas Martin nicolas0martin at gmail.com wrote
a ?crit :
After pulling commit e72c0f548eebfae0171ab8a2e2a74174c1bd96ae, the pixma
backend works correctly with my MX850; there is no corruption, even on
widths indivisible by 32.
Thanks!
- Dustin DeWeese
On 01/06/2011 04:19 PM, Nicolas Martin wrote:
AFAIK, I've currently only heard
AFAIK, I've currently only heard about this pending issue for the pixma
backend, reported by Dustin DeWeese:
https://alioth.debian.org/tracker/?func=detailatid=410366aid=312874group_id=30186
Maybe Dustin could give us more info about his current test status,
using the latest git ?
Nicolas
Le
Le vendredi 31 d?cembre 2010 ? 02:55 +0900, Gernot Hassenpflug a ?crit :
On Fri, Dec 31, 2010 at 2:50 AM, Robert Krawitz rlk at alum.mit.edu wrote:
On Fri, 31 Dec 2010 02:41:10 +0900, Gernot Hassenpflug wrote:
On Fri, Dec 31, 2010 at 2:19 AM, Gerard Klaver gerard.klaver at
xs4all.nl wrote:
Le vendredi 31 d?cembre 2010 ? 14:11 +0900, Gernot Hassenpflug a ?crit :
On Fri, Dec 31, 2010 at 8:11 AM, Gernot Hassenpflug
aikishugyo at gmail.com wrote:
On Fri, Dec 31, 2010 at 8:05 AM, Nicolas Martin
nicolas0martin at gmail.com wrote:
Le vendredi 31 d?cembre 2010 ? 02:55 +0900, Gernot
2010/11/30 Gernot Hassenpflug aikishugyo at gmail.com
On Tue, Nov 30, 2010 at 5:53 AM, Nicolas Martin
nicolas0martin at gmail.com wrote:
Le lundi 29 novembre 2010 ? 19:54 +0100, Tomas Pospisek a ?crit :
On Mon, 29 Nov 2010, Tom?? Posp??ek wrote:
[...]
The same patch seems also
Le lundi 29 novembre 2010 ? 22:08 +0100, Tomas Pospisek a ?crit :
I will, however I ask you to please bear with me until in a few days when
I'll be able to test the scanner again.
Ok
Could you describe a little bit more what was the issue with grayscale
scan on MX310 ?
BTW, BW is currently not supported on this model, some more details
about how you were proceeding would be useful to step further.
Nicolas
Le lundi 27 septembre 2010 ? 14:36 -0400, m. allan noah a ?crit :
I
Le mardi 07 septembre 2010 ? 19:47 +0900, Gernot Hassenpflug a ?crit :
Dear all,
I am working on the pixma backend for Canon devices (variation:
pixma_mp150.c), and have a question about registration of pixels in
the y dimension.
Each backend I believe has variations on a
Le samedi 24 juillet 2010 ? 00:00 +0200, Mickael Profeta a ?crit :
Hmm, that's funny indeed. Maybe to clarify, I do not know if it is
related or not. The scanner has two modes, distant scan and connected
to a computer. Not quite sure of the translation. I attach a new log
in computer mode
Le jeudi 22 juillet 2010 ? 00:05 +0200, Matthias Pannek a ?crit :
On Wed, 21 Jul 2010 20:23:16 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
Yes, there was an error in the limiting to 600 dpi formula, hopefully,
should be fixed in the new file attached.
Works fine now.
Ok
Note sure either what it means, but after some googling, it looks linked to
some versions of kernel
Did you try to modprobe -r the modules usblp and usb_storage ?
Nicolas
2010/7/22 Nicolas Martin nicolas0martin at gmail.com
Not sure either wha
2010/7/22 Matthias Pannek matthias at pannek.de
Le mercredi 21 juillet 2010 ? 00:03 +0200, Matthias Pannek a ?crit :
600 DPI scan works perfectly, but 1200 and 2400 crashes with Floating
point exception. 601 DPI seems to work too.
Logs are cash.log and strace.log
Yes, there was an error in the limiting to 600 dpi formula, hopefully,
Do you have the possibility to get a Windows usb snoop log using
SnoopyPro.exe, to check if the protocol this model uses is a Pixma one ?
I can give you instructions on how to do this if needed.
Nicolas
Le mercredi 21 juillet 2010 ? 14:09 +0200, Mickael Profeta a ?crit :
Le Wed, 21 Jul 2010
.
Nicolas
Le mercredi 21 juillet 2010 ? 21:13 +0200, Mickael Profeta a ?crit :
Le Wed, 21 Jul 2010 20:25:39 +0200,
Nicolas Martin nicolas0martin at gmail.com a ?crit :
Do you have the possibility to get a Windows usb snoop log using
SnoopyPro.exe, to check if the protocol this model uses
Ok, I try to imitate best the net traffic seen in Windows that you sent
in the file traffic.txt on 18/7. But I made a mistake with the xml
messages, so here is another try. The changes are to see if the scanner
recovers from adf empty (again, seen from the Pixma dialog exchanged in
the net logs)
Le dimanche 18 juillet 2010 ? 23:25 +0200, Matthias Pannek a ?crit :
On Sun, 18 Jul 2010 21:34:59 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
Slightly modified again file pixma_mp150.c (new attached) to add:
- maximum 600 dpi for generation 4 scanners in ADF/ADF duplex mode
Le lundi 19 juillet 2010 ? 23:11 +0900, Gernot Hassenpflug a ?crit :
Dear list,
I'm currently testing a Canon PIXUS all-in-one MP700 which is similar
in structure to the MP710 I had until recently (power failed, thrown
out).
I am using CVS, as shown by scanimage -V:
scanimage
Le dimanche 18 juillet 2010 ? 00:04 +0200, Matthias Pannek a ?crit :
On Sat, 17 Jul 2010 21:17:44 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
Problem is, I don't see yet a solution to exit from this pitfall, need
to think it over.
Ok.
ADF: Working until 600 DPI, i
Le dimanche 18 juillet 2010 ? 16:30 +0200, Matthias Pannek a ?crit :
On Sun, 18 Jul 2010 15:44:50 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
I've just added some lines to force max scan when using ADF to 600
dpi, even if higher resolution is selected in the frontend
Le vendredi 16 juillet 2010 ? 23:46 +0200, Matthias Pannek a ?crit :
On Fri, 16 Jul 2010 21:51:08 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
Ok, so ready for a test ?
Sure :-)
Then, replace the file sane-backends/backend/pixma_mp150.c with the
one I've attached. I've
Sounds good then ;-)
Matthias, before I commit the changes and update the docs, did you try
the ADF and ADF duplex features, and do they work fine ? (remember to
set 2 pages to scan per sheet of paper in ADF when in duplex mode)
Louis, nice to read from you, hope you spent good holidays, and
Le samedi 17 juillet 2010 ? 17:36 +0200, Matthias Pannek a ?crit :
On Sat, 17 Jul 2010 14:44:00 +0200
Nicolas Martin nicolas0martin at gmail.com wrote:
Matthias, before I commit the changes and update the docs, did you try
the ADF and ADF duplex features, and do they work fine ? (remember
Ok, so ready for a test ?
Let's assume MX870 is a somehow a MX860, and uses the generation 4 Pixma
protocol.
First, download the latest Sane git version. You should get a
sane-backends folder.
Then, replace the file sane-backends/backend/pixma_mp150.c with the one
I've attached. I've just added
I took a look at the process list you sent, but difficult for me to tell
which one is involved with the usb port used by the Pixma device, as I
don't know anything about 50% of them, and the names do not help too
much to know what they are used for.
Unfortunately, no other idea for the moment,
The process here under is probably not an application, but runs in
background, it may be a printing daemon or service started after boot, which
locks access to the usb port.
I really know nothing about Mac OS X, to help you find it, maybe stop a
printing service would help.
Nicolas
2010/7/13
70.
Can
On Mon, Jun 28, 2010 at 11:46 AM, Nicolas Martin
nicolas0martin at gmail.com wrote:
Point is, for whatever reason, Pixma debug logs do not show up
even when setting SANE_DEBUG_PIXMA to a correct level, only
SANE_DEBUG and SANE_DEBUG_SANEI_USB produce logs, as showed
Well, not exactly something new, the 2 logs are somehow equivalent, but one
gives a little bit more details:
[pixma] en1 is not a valid IPv4 interface, skipping...
[pixma] en1 is IPv4 capable, sending broadcast..
[pixma] scanner discovery finished...
[pixma] pixma_open(): Canon imageClass MF6500
Le dimanche 04 juillet 2010 ? 23:14 +0200, Guenther Hutzl a ?crit :
On 07/04/2010 08:32 PM, Nicolas Martin wrote:
As far as I understand, you are using your scanner with Ethernet or Wifi
connection. And it tries to communicate with an IP address, but in
message, we can read both:
Failed
Le dimanche 04 juillet 2010 ? 01:33 +, John a ?crit :
Guenther Hutzl guenther.hutzl at googlemail.com writes:
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for
the
MX350
from:
As far as I understand, you are using your scanner with Ethernet or Wifi
connection. And it tries to communicate with an IP address, but in
message, we can read both:
Failed to open device 'pixma:MX350_192.167.1.88': Invalid argument.
and
scanimage: open of device pixma:MX350_192.168.1.88
Le samedi 03 juillet 2010 ? 09:05 +0200, Guenther Hutzl a ?crit :
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for the
MX350
from:
http://software.canon-europe.com/products/0010836.asp
Using the rpms from that source I
Could you try to recompile Sane with the attached file.
Place it in sane-backends/backend to replace current git one, and
recompile/reinstall Sane.
Nicolas
Le samedi 03 juillet 2010 ? 15:33 +0200, Guenther Hutzl a ?crit :
If you can provide the USB pid for this model, we could try a quick
files, give another try exactly as you did
this one, and catch another scanimage.log, this one should not contain
this warning message anymore.
Nicolas
Le samedi 03 juillet 2010 ? 10:40 -0500, Ron Parker a ?crit :
scanimage.log
- Original Message -
From: Nicolas Martin
Yep, this one is perfect ;-)
Thanks
Nicolas
Le samedi 03 juillet 2010 ? 15:13 -0500, Ron Parker a ?crit :
results after git pull and rebuild. Look better!
Ron
- Original Message -
From: Nicolas Martin nicolas0martin at gmail.com
To: Ron Parker mail at ronparker.us
Cc: sane
Goods news then, thanks Ron for your report ;-)
Looks like your attachment (I suppose the scan log) has been suppressed
from this email (maybe size is too big), so could you retry to get a
smaller one by running these commands:
$ export SANE_DEBUG_PIXMA=11
$ scanimage -x 100 -y 100 1 /dev/null
Sending here, answer posted in bug tracker, with adequate formatting.
Message:
The Sane lib 1.0.20 released with Ubuntu 10.04 does did have some
declarations for the MF65xx series, but was untested, due to lack of
testers.
Until recently, some guy tried to use its MF6580 under MacOSX, he sent
me
THX a lot for your feedback tests, I'll add your patch to the pixma
backend and update docs.
Nicolas
Le mercredi 30 juin 2010 ? 21:15 -0500, Dan McGee a ?crit :
It behaves just like the MX330, so more or less a duplication of those
references worked for this scanner. This has been tested and
Point is, for whatever reason, Pixma debug logs do not show up even when
setting SANE_DEBUG_PIXMA to a correct level, only SANE_DEBUG and
SANE_DEBUG_SANEI_USB produce logs, as showed up in the logs twain43 is
providing.
Just trying to figure out why this happens when compiled in this
environment.
but not
sanei_debug.h.
A quick test of that theory is to modify the file
backends/pixma_common.h around line 57 and change #ifdef NDEBUG to
#ifdef NDEBUGBL. Also, similar change needed at
backends/pixma.c line 70.
Can
On Mon, Jun 28, 2010 at 11:46 AM, Nicolas Martin
nicolas0martin at gmail.com wrote
PIXMA MX350 is not yet declared in the Sane pixma backend, so it won't
be detected.
Do you have the possibility to get a USB Snoop trace using Snoopypro.exe
on windows (I can give you the procedure if you want, this is simple, or
you can look at some other messages in the Sane-devel mailing list
I think you omitted to send the zipped logs with your previous message ?
Nicolas
Le mardi 22 juin 2010 ? 11:14 +, twain43 at hotmail.com a ?crit :
Took longer than usual, but I did as you recommended.
1. Built the libusb version linked and installed it;
2. Exported only PIXMA and
There's been no change to the git rep on 14th or 15th concerning the pixma
backend, changes affect only other backends. Latest changes to pixma backend
was on June 8
But to be sure, you could try to download the 14 June git image and test
with it.
Just go to the Web page:
So now, are you able to get a log trace with [pixma] statements, using only
the export SANE_DEBUG_PIXMA=11 statement, and a scanimage -T or a scanimage
foo.pnm ?
The purpose is to get a trace to know where an error is encountered. Without
it, I'm afraid we will not be able to investigate too far
So complete different behaviour here than on Linux.
And does the scanimage foo.pnm with the same export statement give more
information ?
2010/6/17 twain43 at hotmail.com
Here's the pixma trace logbut I'm afraid it reports nothing more than
it did last time
Twain28
Running a bit out of ideas why it behaves like this and why logs do not
come out from the backend.
Probably something runs differently on MacOS, but I cannot figure out
what exactly.
Nicolas
Le jeudi 17 juin 2010 ? 16:47 +, twain43 at hotmail.com a ?crit :
Already tried.
100% same log
You mean you cannot get anymore the same log that you produced and sent us
12 days ago, on June 4 ?
Nicolas
2010/6/16 twain43 at hotmail.com
Today's log.
I manually deleted the printer from both System Preferences and
/Library/Printers, then tried again. No actual change.
Is there something
So now, could you install the git version, and the patched file I sent you,
and give another try ?
BTW, you cut too much of the previous log trace, it shows only the very
beginning of the scanning dialog
Nicolas
2010/6/16 twain43 at hotmail.com
Done.
1: make uninstalled sane development
Failing at the very beginning of the scan here.
At this point, do you have the
scanimage -T
command running correctly ? i.e., with the PASS statements ?
2010/6/16 twain43 at hotmail.com
Done so.
Here's the log. No cuts here, I just quit terminal after a few minutes of
wait. No wheezing
/16 Nicolas Martin nicolas0martin at gmail.com
Failing at the very beginning of the scan here.
At this point, do you have the
scanimage -T
command running correctly ? i.e., with the PASS statements ?
-- next part --
An HTML attachment was scrubbed...
URL:
http
But there's nothing in this log !
Something looks wrong with your installation, so could you try to get a
scanimage log as you did formerly, like the one sent on 4 June ?
Nicolas
2010/6/15 twain43 at hotmail.com
Here's the log. I attached the pnm file too, just in case
This time, pixma
Looks this time, your scanner is locked by some other application.
Maybe you should try to unplug/replug it ?
[pixma] scanner discovery finished...
[pixma] pixma_open(): Canon imageClass MF6500
[sanei_usb] sanei_usb_open: trying to open device
`libusb:005:002-04a9-2686-00-00'
usb_os_open:
Sounds like you cannot get to same state as you were on June 4.
Did you try to reboot the Hackintosh ?
Did you try to run these commands as root ?
2010/6/15 twain43 at hotmail.com
New log. Same result. Tried plugging/unplugging before: nothing changed.
Twain28
-- next part
Not sure.
Canon printer SW may have locked the USB port.
Could you ty to disable printing at least for a test ?
2010/6/15 twain43 at hotmail.com
Rebooted, run as root. Log reads indentical.
regarding allan's question: do canon's printer drivers count as software?
If so, yesbut I really
Yes ... the interesting log with [pixma] statements was send to your
console !
This little image filled up with 0s is strange, to understand what's
going on, could you try to get another log with the following commands:
export SANE_DEBUG_PIXMA=11
scanimage 2 scanimage.log 1 foo.pnm
You
This log looks good indeed ;-)
A suggestion: did you try
scanimage foo.pnm
and look what you get in foo.pnm ?
PS: the previous log did not contain the [pixma] statements, meaning you
may have omitted one of the 3 export commands to enter before running
the scanimage -T . Could you try again,
I don't know the current status of Darwin libusb against usb interrupts,
but it used to not support timeouts in older versions, which makes pixma
backend unusable for some PIXMA models.
Looking at the Darwin libusb 1.13 source files, comments show this may
be working now, but not sure (source
Just looked at the logs (only the beginning is interesting for me), but
it fails at the same point even after having fixed the checksums
(although the scanner did not seem to care they were misplaced)
But one thing surprises me: in the usb dialogs, I don't see any USB
Interrupt messages like in
Just Committed a few bunch of modifications to latest git.
Could you give a try with it, and get another scanimage -T logfile as
you did previously:
export SANE_DEBUG_PIXMA=11
scanimage -T 2 scanimage.log
We will see how it behaves from there
Nicolas
Le lundi 07 juin 2010 ? 09:20 +,
Just browsed quickly through the French sentences, and saw a small
typo:
courier
correct writing is with 2 r
courrier
Le dimanche 06 juin 2010 ? 00:55 +0200, Yann E. MORIN a ?crit :
#: ../include/sane/saneopts.h:445
-#, fuzzy, no-c-format
+#, no-c-format
msgid Email button
You can use Snoopypro.exe to get a usb snoop on Windows, this is a very
old program, but hopefully, still working on Vista.
Download from Snoopypro from sourceforge.net here:
http://sourceforge.net/projects/usbsnoop/
Read and follow exactly the instructions in SnoopyPro.exe, then try to
record
Looks this will require some logs to be taken first.
Turn debugging on this way in order to grab some additional data.
Run scanimage after some export commands:
export SANE_DEBUG_PIXMA=11
scanimage -T 2 scanimage.log
Send back the scanimage.log file you'll get.
Nicolas
Le jeudi 03 juin
Thanks for the log.
I'm wondering whether this model acts like the MF4600 series, giving the
point where the scan sequence fails.
Do you have the possibility to run a Windows PC with this scanner, to
get a usb snoop (I can explain you how this is pretty easy) ?
Nicolas
Le vendredi 04 juin 2010
at coolpixx.de forum at coolpixx.de
wrote
Ok now I hope it's right
Perfect! I hope Nicolas Martin will give his opinion also, since he is
working on the pixma backend and I do not have experience with the
ImageCLASS devices but will take a look.
Regards,
Gernot
--
sane-devel mailing list
Le samedi 06 mars 2010 ? 18:04 -0800, Bradley D. Thornton a ?crit :
Hi Nicolas :)
Nicolas Martin wrote:
AFAIK, the Pixma protocol, which MP210 uses, is different from the one
implemented in canon630u, and I guess MP210 won't be able to work with
that backend.
Yes you are correct
MP210 is well supported by Sane (should be OK with 1.0.20, but better
install Sane git and recompile now that you're here), I don't know which
version of Sane ships with Slackware 13.0, but the MP210 is a Pixma
model, and uses the Sane pixma backend to operate. NOT canon630u.
After browsing
, and then take it from there so I can do a write up
for the next poor soul who finds himself in the same pickle as I was in
too :)
Thanks for all your work on this project and your support as well!
Kindest regards,
Bradley.
Nicolas Martin wrote:
MP210 is well supported by Sane (should be OK
Le lundi 01 f?vrier 2010 ? 00:24 -0500, Michael DeBusk a ?crit :
On 01/30/2010 05:36 AM, Nicolas Martin wrote:
The black and the white were fine. I had trouble with the gray on the
color scan because gray on an inkjet isn't really gray. I had better
luck with a DVD cover I had nearby.
Yes
MF43x0d models, have started to be supported in the git development
version of Sane a few months ago. That's why they are not supported by
Sane 1.0.19 nor 1.0.20, they're only supported by Sane git for now.
First, install the git Sane version, you can get help for that in the
blog post below:
Le samedi 30 janvier 2010 ? 05:22 -0500, Michael DeBusk a ?crit :
I take it that that counts as working now. Is there anything I can do
to add additional useful information to this thread?
Try to scan an image with Xsane.
Adjust the colors using the 3 pipettes tool (white/black/gray) in the
I've just tried the files you sent with an MP610 and Xsane, but at the
moment, I could not scan completely, scanning hangs during data
transfer.
Don't know yet why this happens, I noticed you used some older pixma
backend files, so would it be possible that you add these changes to the
current
Could you try first the same commands under root, so that we can check
whether this is a perms issue or not:
$ sudo -i
# scanimage -T
Nicolas
Le samedi 09 janvier 2010 ? 11:08 +0100, Christian Kolhaupt a ?crit :
Hello,
im trying to get the canon mp270 running. Printing works without
Le mercredi 09 d?cembre 2009 ? 16:05 -0800, qm at sonic.net a ?crit :
So let me know if I understand clearly:
- MX330 works with the pixma backend. It was not yet declared in Sane
1.0.20, but is declared in Sane git for a while now, with the proper usb
pid. If you install Sane git, MX330
So let me know if I understand clearly:
- MX330 works with the pixma backend. It was not yet declared in Sane
1.0.20, but is declared in Sane git for a while now, with the proper usb
pid. If you install Sane git, MX330 should work out of the box.
No issue for MX330 on that side, I'll update the
Le dimanche 06 d?cembre 2009 ? 10:50 +0100, Nicolas Martin a ?crit :
- There's an error with scanimage/pixma backend when setting explicitly
-x or -y options to auto. This is the same for all pixma devices, so
probably something the pixma backend rejects for now, and that needs to
be checked
Le samedi 05 d?cembre 2009 ? 00:41 +0100, Rogier Eggers a ?crit :
Nicolas, indeed you fixed one bug earlier. And now it seems you fixed
the other one as well. Multi-page scans go smooth (see log). Great
work and thanks!
Thanks Rogier, everything looks okay now in the log ;-)
Nicolas
Le jeudi 03 d?cembre 2009 ? 17:02 -0600, Chris Bagwell a ?crit :
So your saying that, for you, running make distclean; ./configure
--enable-pthread; make doesn't correctly have USE_PTHREAD defined?
Yes, indeed.
If so, do you mind emailing me your config.log and
include/src/config.h?
Le jeudi 03 d?cembre 2009 ? 23:39 +0100, Rogier Eggers a ?crit :
Gentlemen,
With the help of Wade and Chris, I could successfully compile sane
with pthread. However, the behaviour is unfortunately still the same
as with the ubuntu binary (see log).
Actually, not exactly.
We are on the
Le vendredi 04 d?cembre 2009 ? 22:20 +0100, Nicolas Martin a ?crit :
The end sequence is now correct, but there's still something to fix in
the backend (state flag not reset to idle)
and I need to look now what's going on here.
Will keep you posted
Rogier, could you give another try
Le jeudi 03 d?cembre 2009 ? 13:33 +0100, Jean-Michel Pour? a ?crit :
On Sat, 2009-11-28 at 16:39 +0100, Jean-Michel Pour? wrote:
Please leave me some time before I can turn back to you to
garantee it works.
I am getting back with more information.
The Canon PIXMA 990 is almost working:
On Wed, Dec 2, 2009 at 5:37 PM, Rogier Eggers rogiereggers at gmail.com
wrote:
Hi Nicolas,
Ok, so indeed, the git version without pthtread works
flawlessy (see attached log). However, I so far didn't manage
to build sane-backends with pthread.
? a ?crit :
Le samedi 28 novembre 2009 ? 08:58 +0100, Jean-Michel Pour? a ?crit :
Le vendredi 27 novembre 2009 ? 21:26 +0100, Nicolas Martin a ?crit :
Hey ! you don't have Sane git installed !
Dear friends,
Sane GIT works like a charms thanks to the explanations. I was able to
configure AVAHI
(threaded)
In both cases, hopefully, the multi-page ADF scan should work correctly
now ;-)
Let us know.
Nicolas
Le mercredi 25 novembre 2009 ? 21:44 +0100, Nicolas Martin a ?crit :
I'll take a look to the log trace and compare it to some others I have
for multi-page ADF.
There's something
...
[sanei_debug] Setting debug level of pixma to 11.
[pixma] pixma version 0.15.0
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: marking existing devices
...
Hey ! you don't have Sane git installed !
This version of the pixma backend will not handle MP990,
Ok, so first turn debugging on, in order to grab some additional data.
Run scanimage after some export commands:
export SANE_DEBUG_SANEI_USB=255
export SANE_DEBUG=255
export SANE_DEBUG_PIXMA=11
scanimage -L 2 scanimage.log
and send back the scanimage.log file you'll get.
Nicolas
Le jeudi 26
Eggers a ?crit :
Hi Nicolas,
Thanks for replying. Your debug instructions produced the attached log
file. I hope you can make something of it.
Regards,
Rogier Eggers
On Tue, 2009-11-24 at 08:15 +0100, Nicolas Martin wrote:
Hi Rogier,
We would need first a log trace to see
Hi Rogier,
We would need first a log trace to see what's going on here, don't know
what could have changed with Karmic. Could you run the scanimage batch
command like this:
$ export SANE_DEBUG_PIXMA=11
$ scanimage --batch --source=Automatic Document Feeder -v -d
pixma:04A91728_1163AA -v 1
2009/10/27 Adrian Sandor aditsu at yahoo.com
I guess that means there's no support for it in SANE, and I'll have to use
USB, possibly for a very long time.
Ok then, than you very much for the help.
Adrian,
Analyzing the trace for this device show that the protocol used here is
completely
2009/10/27 Adrian Sandor aditsu at yahoo.com
Well, I'm not a Sane dev, but I have another multi (HP Photosmart C6380,
using hpaio), and I get the same behavior with it.
Should I report this to the gimp project?
Yes, you can inform the gimp team about this bug, I'll also send them a
message
Le mardi 27 octobre 2009 ? 10:41 +0100, vatairethibault at no-log.org a
?crit :
Thanks a lot for your work.
And thanks for your feedback about that, knowing that things are working
is as much important to us than be informed about new issues
Nicolas
Le samedi 24 octobre 2009 ? 12:20 -0700, Adrian Sandor a ?crit :
Well, when I did it like that, it worked correctly (it waited after the first
image, and when I pressed Start again on the device it scanned the second
image).
However, the behavior is not the same when scanning from gimp via
Hi Louis,
Incredible!
I don't see any ressemblance here with the Pixma protocol, although usb
uses it!
Looks like Canon has invented a totally new wheel ;-(
Nicolas
Le samedi 24 octobre 2009 ? 21:37 +0200, Louis Lagendijk a ?crit :
Hi Adrian
a quick short response:
I had a quick look (I
And after googling a bit, this wireshark trace demonstrates the use of
another Canon network proprietary protocol named CPCA, usually for
Canon iR business products. Unfortunately nothing common with bjnp or
pixma protocols ...
Nicolas
Le mercredi 21 octobre 2009 ? 22:04 -0700, Adrian Sandor a ?crit :
Yes, and more than that, if the device is in power-saving mode, I have to
press another button to wake it up first, then put it in scanning mode.
And if I let it sit idle after scanning, it goes to copy mode after a while,
Le lundi 19 octobre 2009 ? 22:34 -0700, Adrian Sandor a ?crit :
Well, you didn't say how.
You didn't ask for help ;-)
Yes I did, I wrote Anyway, please let me know when I can try the new code
**and how**.
But it's ok now.
Ok, misunderstanding of how, thought you had already been able to
Thanks a lot for this information, I'll update the pixma_imageclass.c
file and backend documentation with this.
Nicolas
Le mercredi 21 octobre 2009 ? 17:38 +0200, Wojciech Wiercho?a a ?crit :
Manufacturer: Canon
Model name: I-SENSYS MF4320d
Bus type: USB
Vendor ID: 0x04a9
Product ID: 0x26ee
1 - 100 of 188 matches
Mail list logo
