Robert,
I just reshafted my driver with a BLUE. I have not had a chance to see
outside performance but I have used it for about 3 weeks in an Indoor
simulator league.
The ball flight is a lot lower.
The shaft plays at least 1 flex stiffer than stated flex.
I think my shot dispersion is tighter wit
Mark,
I'd say it's not bendable (just my voice of experience). I won't even
attempt them in by shop. BeCu is very dense and very brittle.
I'd want who ever said "no problem" to guarentee in writing that they can
bend it as you have requested and will replace at no cost to you should it
break in t
I got part (Head only), shaft snapped via anger management at golf dome.
What shaft is a replacement for the new Nike blades? My guess is TT Dynamic
gold taper tip.
Thanks
JP
Got a club in today with a True Temper UNI-TIP shaft.
My guess is that it is a parallel tip shaft (formerly known ad unitized)
Any ideas as to if this is parallel or taper tip?
Thanks
JP LaChance
Anyone ordered from this supplier?
They carry "Leyland"
Any comments on quality of the shafts or the components?
Thanks
JP LaChance
Madison, WI
Well
I'll be damned. I'm a dealer too!
Who
was in my class?
I just
don't seem to remember anyone. It is the faces i have trouble with, &
the Aholes I remember. Funny thing is I don't remember meeting this ahole
or getting certified.
JP
LaChance
-Original Message-From: Child
John,
I know I will get a lot of crap on this one but I like the water sol. grip
tape. It is easy to clean up, grips install great (especially over size) &
I don't get that lighter fluid stink smell all over my hands & clothes.
JP
[EMAIL PROTECTED] wrote:
>
> Any reason that a person would
TECTED]Subject: Re: ShopTalk:
Dynacraft Q4's
What do you think of the Tour series Wedges?
Just a bit curious.
Mats B
Karlstad
Sweden
>From: Jonathan LaChance <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: "'Shoptalk (E-mail)"
The Q4's are a solid head with minimal offset. I play a set of 5-AW in the
Q4's and SW, 60° & 64° Tour Series Wedges. As for the Q4's I like the
longer (heal to toe) look and the thin top line.
These clubs hit the ball higher than anything I have ever played in the
past. Part of the high ball
PLAY BETTER!
When I played in college SOME PLAYERS WERE BETTER THAN OTHERS (guess who
won?)...That's life. None of this handicap junk..You go out and play with
what you have and do the best you can! Nobody said life is FAIR!
That's my 2 cents
JP
-Original Message-
From: tflan [mailto:[E
We
sure Golfsmith is going to be in the component biz in the
future?
JP
-Original Message-From: Al Taylor
[mailto:[EMAIL PROTECTED]]Sent: Monday, August 26, 2002 11:34
PMTo: [EMAIL PROTECTED]Subject: Re: ShopTalk:
Another guy to beat up!A real house cleaning going
on.A
To say the raven blades are "oversized" would be a stretch. I thought the
heads had a very compact look.
THEY ARE THE MOST SOLID BLADE I HAVE EVER HIT! THe only two heads that I
though felt better are the Dynacraft Q4's (my current irons), and the Maltby
Golfworks RDM's (Infreadible feel but t
This is the only stuff I use. It comes in a 24HR, 30 Minute & I believe a 5
Minute. I really like the 30 Minute stuff for making up a Demo club or
quick repairs. I use 24Hr on all things that go out the door.
I have not tried the 5-min version as I have had a bad experience with Quick
Set in th
PC3's are a very solid head. Very good feel. I liked their minimal offset
appearance. I played the 3° Flat versions and was very satisified with the
lie.
Good Luck
JP LaChance
Madison, WI
-Original Message-
From: Jack Russell [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 21, 2002
I think our sponsor carries the heads.
If not you can check out their web site www.smtgolf.com
JP
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 12, 2002 10:44 AM
To: [EMAIL PROTECTED]
Subject: ShopTalk: New driver
Would like information ab
Dave,
I have the Shinnecock & Baltisrol in my demo clubs and everybody that has
hit them hits the Shinnecock higher and straighter than the Baltisrol. The
Shinnecock has a high draw ball flight and the Baltisrol has a lower fade
ball flight (both 10° heads) when compared head to head. I don't ha
Anyone got a contact for these people?
I have a customer who came in with a cracked head and I need to know who /
where to contact.
Thanks
JP LaChance
Madison, WI
Where do you get your reamer bits from?
Thanks
JP
I attended the Dynacraft Clubmaking School this past spring and I can't say
enough about how good it was. The Jeff & Jeff Show is GREAT!
The biggest things that sent me to this school over the Golfworks School or
the Golfsmith School was the fact that the authors of the book were TEACHING
the cl
John,
My reply to your e-mail (Ball Spinner) keeps getting bounced.
Please give me a call.
Thanks
Jon LaChance
Custom Clubs Unlimited
608-226-9299
Dave,
I am having trouble getting a grip on my wooden dowel. Got any advice?
Thanks
JP LaChance
-Original Message-
From: Dave Tutelman [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 11, 2002 8:50 AM
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Whippy
Hi, Dan!
No I didn't try any of
I have several of the dynamic spinners. Please contact me via private
e-mail if interested.
Thanks
JP LaChance
-Original Message-
From: Royce Engler [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 11, 2002 7:26 AM
To: [EMAIL PROTECTED]
Subject: RE: ShopTalk: Ball Balance Kit
Dave Pel
ShopTalk:
Forged iron comparison
Jonathan,
How do you like the
Q4's?
Tom Janson
- Original Message -
From:
Jonathan
LaChance
To: 'Shoptalk (E-mail)
Sent: Thursday, June 27, 2002 7:19
AM
Subject: RE: ShopTalk: Forged iron
com
I ordered a demo of
the Blade version of the near net I just built the club on Monday
night. I hope to get the Neat Net Blade version out ot the range this
weekend or early next week. The finish on the blade was very good.
Tradisional shape and size (looks small next to my Q4's). I will
Jeff,
Do you have access to the 4 & 6
Irons?
If so Measure the groundline to first step
on those two and split the difference.
If you end up needing to extend the shaft a
bit that would not be then end of the world.
Good luck
JP LaChance
ccugolf.com
-Original Message-From: Jeff S
Do you have any idea on what the face angle on either of the heads is?
That might be the best place to start. If they are 1-2° apart that might be
enough to turn a draw into a hook
Good luck
JP
-Original Message-
From: Mark Fields [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 18, 20
That is what I was
told too. Plus you must be a "retail shop" what ever that is or they
won't deal with you. Lots of other very good component companies out there
so I am not too worried. If they don't want to sell another 10-15 drivers
a year out of my place of business then someone else
Thanks
all
Leaderboard was the answer
JP
-Original Message-From: Jonathan LaChance
Sent: Monday, June 10, 2002 2:07 PMTo: SpinetalkersForum
(E-mail); 'Shoptalk (E-mail)Subject: [SpinetalkersForum] TT-Release
with Sensicore (L-flex)??Who if anyone carries
TT-Rele
Who if anyone carries TT-Release W/ Sensicore in an L-Flex shaft?
Golfworks, Dynacraft & Golfsmith all say they don't carry.
I need about 10 if anyone has some laying around.
Thanks
JP LaChance
Madison, WI
29 matches
Mail list logo