I don’t know if it’s worth trying (and if it’s possible and how) to
modify those intervals in sipx. But as a workaround you can set requested
time to 300 sec. in the UA, which looks to be a min. registration period in
sipx.
(Not discussing that you would better use different, standard conforming
As part of migration from a legacy pbx to sipX (at least I hope) I need
to do the following:
1) Map a large number of short codes to external numbers ie 6600 -
041234567
2) Do the reverse for caller-id on incoming calls i.e map 041234567-6600
Unfortunately there is no pattern to the transform
I've done something similar for a customer for DID purposes.
Used a spreadsheet to create an import file and created what i call phantom
users for routing:
User Alias Forward Rule
DID1234 1234 5551212
DID1235 1235
I only have one with 3 sidecars and they are still running 3.4 sipX/pingtel pbx
software and I haven't dared upgrade them with all of the problems that 3.6
3.8 with presence.
Mike
From: sipx-users-boun...@list.sipfoundry.org on behalf of Tony Graziano
Sent:
if your phone isn't in the list of phones you don't need to add it.
this is only for phones that the pbx can generate a configuration file for.
Mike
From: sipx-users-boun...@list.sipfoundry.org on behalf of Stephan Bauer
Sent: Mon 5/18/2009 9:59 AM
To:
Stephan,
Saying configure a phone manually I meant configure a phone via its own
keypad, or its own webinterface
The main point is (as Mike noticed) that, for _some_ phones, that are in the
dropdown list, sipx can generate a configuration file, which could be
downloaded by the phone during
On Tue, 2009-05-19 at 22:25 +1200, hazzanz wrote:
As part of migration from a legacy pbx to sipX (at least I hope) I need
to do the following:
1) Map a large number of short codes to external numbers ie 6600 -
041234567
The external alias file you listed should have done something like
I realized that I should send this info to sipx-users, as it is relevant
to people who are using the unstable, development versions of sipX,
even if they aren't involved in development.
I've added a section to sipx-snapshot to record information which is
useful for detecting deadlocks. Deadlock
Hello guys,
thats it, thank you very much for your help.
Regards
Stephan
Original-Nachricht
Datum: Tue, 19 May 2009 16:26:40 +0400
Von: Nikolay Kondratyev k...@nstel.ru
An: \'Stephan Bauer\' stephan_ba...@gmx.de, sipx-users@list.sipfoundry.org
Betreff: RE: [sipx-users]
Scott Lawrence wrote:
On Tue, 2009-05-19 at 22:25 +1200, hazzanz wrote:
As part of migration from a legacy pbx to sipX (at least I hope) I need
to do the following:
1) Map a large number of short codes to external numbers ie 6600 -
041234567
The external alias file you listed should
I am using soft clients of both Eyebeam and SJphone. The discrepancy exists
between OSBC and SIPX in the same manner.
From: k...@nstel.ru
To: jun@msn.com; sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] Registration Expiration Discrepancy between OSBC
andSIPX
Date: Tue, 19 May
Hi!
I'm thinking of installing sipX components on my PowerPC machine (mac
mini) using Debian Lenny, but I'm not really keen in installing Java.
I read that it is possible to run sipX without sipXconfig, but how can
I manage and configure sipX without sipXconfig?
Regards,
Airikka
Hallo,
after running all Configuration Diagnostic Tests I got the
error DHCP (Option 120) Test No SIP servers supplied.
After enabling the option in windows 2008 DHCP-Server I got
the error Unknown test result: 1.
The standalone programm preflight never stops DHCP Server Test.
On Tue, 2009-05-19 at 19:06 +0200, Tommi Airikka wrote:
Hi!
I'm thinking of installing sipX components on my PowerPC machine (mac
mini) using Debian Lenny, but I'm not really keen in installing Java.
I read that it is possible to run sipX without sipXconfig, but how can
I manage and
Matt White mwh...@thesummit-grp.com 05/15/09 7:53 PM
Awesome,
I couldn't figure out why I was consuming so many hops. I will try and name
the Hunt groups and remove the ext from them.
And if I change my user id to the DID rather than just have it as an alias
maybe I can cut down the
Hello,
I tried to setup a SIP trunk but I can't see a registration at my provider.
I created a SBC witch points to my SIP aware firewall. Then I created a gateway
as a SIP trunk.
I found sipviewer and I am able to see the SIP messages of my phones.
How can I view the SIP messages of my
Hi,
I got following error with sipxproxy SIPXCHANGE_DOMAIN_NAME 'xxx' is not to
my IP address
Because I built sipx from source, I can't find config.defs.
Which file I should change to get sipxproxy running ?
Thanks,
Sen
___
sipx-users mailing
Sen Heng wrote:
Hi,
I got following error with sipxproxy SIPXCHANGE_DOMAIN_NAME 'xxx' is
not to my IP address
Because I built sipx from source, I can't find config.defs.
Which file I should change to get sipxproxy running ?
There is no config.defs any more.
You really need to
Sen Heng wrote:
Hi,
I got following error with sipxproxy SIPXCHANGE_DOMAIN_NAME 'xxx' is
not to my IP address
Because I built sipx from source, I can't find config.defs.
Which file I should change to get sipxproxy running ?
What is SIPXCHANGE?
--martin
There is no
Basically I need three things:
1) We have a legacy pbx. During migration I want people that are moved onto
sipx to still be able to dial 4 digit extentions for people on the legacy
pbx. So they should be able to dial a 4 digit extension and sipx will map
this to an external number i.e.
How the legacy PBX is supposed to reach the users moved onto sipX?
How the calls from the legacy PBX will hit the sipX box?
If all the moved users have DID numbers, you just need to add an alias for
each one. If not, maybe setup an auto-attendant on the sipX asking for the
extension number.
-
MM
How the legacy PBX is supposed to reach the users moved onto sipX? Though
the PSTN
How the calls from the legacy PBX will hit the sipX box?
In from the PSTN though our SIP trunk provider
If all the moved users have DID numbers, you just need to add an alias for
each one. If not, maybe setup an
On Tue, 2009-05-19 at 22:02 +0200, Stephan Bauer wrote:
I tried to setup a SIP trunk but I can't see a registration at my provider.
I created a SBC witch points to my SIP aware firewall. Then I created a
gateway as a SIP trunk.
I found sipviewer and I am able to see the SIP messages of my
How do I setup a ITSP with no username and password and they base it upon
IP.
Thanks
Goran
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe:
Hello,
You do not need a password. Having a user name does not mean you HAVE
to also have a password. Leave that field blank in your ITSP screen.
However, user name is mandatory for the account because all ITSPs
seem to need it and it is usually (but not always) the DID that they
assigned to
I am using Sipxecs version 3.10.2-013143 2008-07-23T18:09:14
ecs-centos5 with an Audicodes Mediant 600 Gateway 5.40A.020 for the SIP Gateway
and Nortel 6830 IP Phone with firmware version V1238.
In several upscale systems, there is a way to see which extensions
are parked by a light on the
26 matches
Mail list logo
