To further elaborate:
My configuration is HyperV 2gig of ram 2 processors set for 30% allocated on
quad core Intel. Whatever is triggering it is during changes to settings. It
never starts until a change is pushed. My setup is also 12 station lines 1
PSTN, 2 ITSP trunks, a cisco 1760V b
I am not running a PAE kernel. Just sampling for anyone how it can be
done to increase beyond 4GB of RAM on a 32 bit Centos distro.
I see this issue on bare metal, I was also suggesting more RAM is
better, hence PAE.
I think it is a worthy question for the dev list, because the fact
that there is
My setup is running on a dual processor 1.5 Ghz PIII w/ 1GB of RAM. It is a
new 4.2 installation (not an upgrade), on a fresh machine (installed from ISO)
on the raw hardware (no Vmware).
As it's a residential setup, there is no call volume to speak of. Fourteen
phones sitting registered, m
I've run sipX on Citrix XenServer with no problems, no CPU spikes, etc.
64 bit RPMs are provided, but not an ISO image. I think the mentality
behind this is if you're going to be installing sipX in an environment
that would require 64 bit then you're probably going to want to do more
custom thi
64 bit was released when I installed it the other day. If I'm wrong there, I
really missed something.
Sent via BlackBerry from T-Mobile
-Original Message-
From: "Todd Hodgen"
Date: Sat, 15 May 2010 13:19:52
To:
Subject: Re: [sipx-users] Java goes to 89 percent an web console gets slow
So, case in point. I believe that VMware is not supported by sipXecs.
They are tested at CentOS 5.2 for the current release. They haven't
released the 64 bit version - don't know why - maybe lack of resources, may
be technical issues - might be it drives the CPU through the roof.
It seems reason
VMware ESXi
CentOS 5.4 64 Bit
No phones, users, sip trunk, or anything.
I just started building it. I have done nothing but put some phone firmwares on
it, work on the dial plans, etc. It has done this 3 times.
Sent via BlackBerry from T-Mobile
-Original Message-
From: "Todd Hodgen"
Da
In 4.2 when setting the "standard" greeting type, the options that used
to be played, "When you are finished, press 1 for more options. To dial
the operator, press 0 at any time." are no longer played. Instead, all
that is played is the greeting that the user recorded, then a beep. Is
this cons
Before a question to the dev list, it might be reasonable for those that are
seeing this issue to tell what their configuration consist of. I've seen
one here that is on a VM solution. And Tony is indicating he is running PAE
Kernel.
I recall a message from Scott Lawrence that indicated he didn
Well. I never install less than 2GB of RAM no matter what.
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431
Email: tgrazi...@myitdepartment.net
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427
Helpdesk Con
Thank you for your input.
We never used any swap according to the statistics.
This is a small system and we do only have minimum resources assigned (768MB
memory, 1 CPU).
We have an identical system and the issue does not show up there...
The mysteries of sipX.
-Original Message-
From: Ton
When using SLA/BLA with an Audiocodes Mediant 1000 I noticed that when
placing calls on hold and retrieving them on different phones the
caller ID changes from whatever came over the PRI to the following
format:
121 where 1 is the trunk number and 21 is the B channel.
Is there any way
In your instance if you don't properly allocate resources to the system it
will be problematic.
How many cpu's and ram will make a difference, as well as kernel timing.
I also think if you are running top...
top -U sipxchange
And see you've started using swap, you should consider a restart. You
I did the 4.0.4 -> 4.2 upgrade last night and everything appears to have
gone smoothly so far except when I started testing new features I
noticed SLA had a peculiar problem that I thought worth mentioning. If
you have an HA environment and DNS SRV is splitting the registrations
between those s
The issue in our case is with a brand new 4.2 install.
I used the UI to restart the configuration service and fortunately never had
any data corruption.
We are running several systems as virtual machines on xenserver.
-Original Message-
From: Tony Graziano [mailto:tgrazi...@myitdepartment
I think it's worth a question the the dev list to understand why this
happens. I had one that was so problematic, I started seeing
corruption in the DB and had to manually rebuild the data before it
became useable.
one can restart the config service from CLI
sipxproc --restart ConfigServer
(but
I have seem the same issue numerous times. Most of the time I can cure it by
restarting the management service and of course a complete system restart
fixes it.
-Original Message-
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Ste
For what it's worth, I have seen this multiple times on my new 4.2
installation as well.
If you wait long enough (~5 or more minutes), things eventually sort
themselves out. In the meantime, however, as you indicated, the web UI
takes about a minute (at least) to navigate from page to page. The
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: 8bit
Organization: SipXecs Forum
In-Reply-To:
X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <46743>
Message-ID:
Srry forgot to add, I installed with the manual-format
option too, but did not get the disk format options scre
On Sat, May 15, 2010 at 2:23 AM, Todd Hodgen wrote:
> Doug, I did a re-install from the ISO and confirmed that when I select the
> installation and the format option, the system installs but it never stops
> at the format screen to request the type of format. Is that something that
> has been re
On Sat, May 15, 2010 at 3:10 AM, an...@iguanait.com wrote:
> Hi, Tony.
>
> Thank you very much for good answer and trying to help me.
>
> We are using currently openfire with LDAP and users authentication is
> done through LDAP. Passwords are encrypted.
>
> Is there any way to use LDAP for managin
Hi, Tony.
Thank you very much for good answer and trying to help me.
We are using currently openfire with LDAP and users authentication is
done through LDAP. Passwords are encrypted.
Is there any way to use LDAP for managing users (and authentication) for
sipx and openfire? As i know right now i
22 matches
Mail list logo
