I must be missing something. The "blue thingy" is an anodised metal servo
arm and the dark spots are the holes.
Michael
> -Original Message-
> From: Harley Michaelis [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 8 January 2002 8:48 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subj
Does anyone have any experience with the E210 airfoil? I would like to
hear about its suitability for a scale glider project.
Michael
Melbourne, Australia
ICQ 3481522
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.ya
Are there copies of the 3R's HLG video still available? Could someone
please direct me to where I might get a copy?
Michael
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
RCSE-List facilities provided by
Robert,
If you sit on the side lines reading the list, I don't think you will
learn a great deal. The true worth of RCSE is the vast knowledge base
That is out there and to tap into it all you have to do is ask a question.
Go ahead, give it a try!
Michael
Melbourne, Australia
ICQ 3481522
> --
Did you cover the foam with packing tape before laying
up the hull? Once you dissolve the foam the packing
tape helps you pull the rest of the goop out.
Michael
Melbourne, Australia
ICQ 3481522
> -Original Message-
> From: SailplaneBoy [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, 19 Nov
Bill
PVA is soluble in water, but it produces a colloidal
solution rather than a aqueous one. Are there any
numbers after the trade name? eg. 20-105? If it is
20-105 (20% hydrolysis, 105 centipoise viscosity) or
greater then you will need to dissolve it in a mixture
of alcohol and water. Prefe
Firstly let me qualify this post by saying that I was not present and I
have formed my opinions about the incident solely on the reports in RCSE.
I think anyone placed in a similar situation would have done the same
thing. But an attempt was made to conceal the mismatched wing with tape.
So obvi
Has anyone had any experience using Mylar thinner than .014"? I would like
to try using the thinner material in an attempt to better conform to tips
and leading edges. The next two stock sizes seem to be 0.010" and 0.0075".
I thought I might start with the 0.010". Any input would be greatly
app
How quickly the world forgetsthe name of the boat was Australia
II.hint, hint.
Michael
Melbourne, Australia
ICQ 3481522
-Original Message-
From: Jim Cubbage [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 25 July 2000 7:20 AM
To: '[EMAIL PROTECTED]'
Cc: '[EMAIL PROTECTED]'
Subject
Whilst on the subject, does anyone have a "foolproof" method for measuring
v-tail incidence?
Michael
Melbourne, Australia
ICQ 3481522
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
RCSE-List faciliti
Mark, are you sure you are referring to the N-120TA? They are 7.8 x 42.5
mm each. I cant see 6 of these fitting inside a 9V battery.
http://www.sanyobatteries.net/NEWnicd3.html#02
Michael
Melbourne, Australia
ICQ 3481522
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTE
Can anyone supply the equations necessary for calculating effective
dihedral?
Thanks.
Michael
Melbourne, Australia
ICQ 3481522
__
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
RCSE-List facilities pro
Put me down for a PAL version! Any idea when it might be available?
Michael
Melbourne, Australia
ICQ 3481522
-Original Message-
From: John Roe [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 17 May 2000 1:31 AM
To: RCSE
Subject: [RCSE] (Updated)THE VIDEO IS HERE, theThree R's of Soaring,
w
I am having a great deal of trouble getting a decent leading edge on my
vacuum bagged HLG wings. I cut the Mylar about 1/8" short of the leading
edge. I apply a 1" wide strip of 1.5 oz glass cloth to the leading edge
with 3M super 77 spray and then wet out the glass with a brush and scrape
the e
Mikey, try laying the cloth at 45 deg. as it tends to follow the contours
much better.
Michael
Melbourne, Australia.
> -Original Message-
> From: Mikey D [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 30 December 1999 11:30 PM
> To: [EMAIL PROTECTED]
> Subject: [RCSE] Airless hand layu
I am having trouble locating a source of 3M super 77 spray adhesive here in
Australia. I can however, but 3M High tack 76 spray. Has anyone used the
76 on foam cores? Does anyone know what the differences between the two
are? Alternatively, is there anyone in Australia using Super 77? The only
Does anyone have a circuit for a lead acid battery charger? Ideally it
would switch to trickle charge when the battery was fully charged and that
way my winch battery would always be ready for use.
Thanks
Michael
Melbourne, Australia
ICQ 3481522
__
>command< un_subscribe list if thread [Yet another major leap forward...
look again] exists
>command< _subscribe if thread [Yet another major leap forward... look
again] does not exist
If only :)
Michael
Melbourne, Australia
ICQ 3481522
__
Do Yo
Very interesting. Do you know who has the rights?
Michael
Melbourne, Australia
ICQ 3481522
> -Original Message-
> From: Oliver Wilson [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 30 November 1999 14:08
> To: Michael Imsic
> Subject: Re: [RCSE] Need co-ordinates for
Does anyone have any experience with the Graupner Soarmaster? It looks nice
and seems to be reasonable priced, but how does it fly and launch?
Thanks
Michael
Melbourne, Australia
ICQ 3481522
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to
Unfortunately they only sell Tx and Rx.
Michael
-Original Message-
From: Garland Hanson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 8 September 1999 11:56
To: Michael Imsic
Subject: Re: [RCSE] Wanted: Futaba FP8UA transmitter
You can get them sold separately (without servos, battery
I would like to buy an Futaba FP8UA tranmiter. If there is anyone that is
considering selling one, or if anyone knows a retailer who sells them
seperately, please email me.
Thanks
Michael
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EM
Quite a few people have mentioned using vacuum advances as vacuum switches.
Can someone post some details.
Michael
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
Currently I have a sanwa 7 chanel RC that only has basic flap mixing. I
feel its time to get a new radio with all the mixing hoopla that is needed
for modern gliders. I have an opertunity to buy a secondhand JR x-347 or
should I buy a new JR x-642? Can someone tell me how the two radios compare
Does anyone have any webpages or notes which outline vaccume bagging with
mylar?
Thanks
Michael
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
Does anyone have a sapphire they would like to part with?
Thanks
Michael
Melbourne, Australia
ICQ 3481522
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
RCSE-List facilities provided by Model Airplane News. Send "subscrib
26 matches
Mail list logo