Hi Pat , all ...
If your not using your rx spoiler channel(1) for anything use it for
throttle . You can then get away with a 7 ch rx .
Should be able to do it if you have one free programmable mix .
1st ) set TRVL ADJ. for SPOI (ch 1) to ZERO in both directions . This makes
the flap
, if your ESC has these capabilities. Less stress on the gearbox.
From: Dave Sue Moore [EMAIL PROTECTED]
Date: 2004/03/15 Mon AM 02:25:31 EST
To: RCSE [EMAIL PROTECTED]
Subject: Re: [RCSE] Programming Help
Pat,
When you find out, let us all know. I have the same issue on one of my
electric
on the gearbox.
From: Dave Sue Moore [EMAIL PROTECTED]
Date: 2004/03/15 Mon AM 02:25:31 EST
To: RCSE [EMAIL PROTECTED]
Subject: Re: [RCSE] Programming Help
Pat,
When you find out, let us all know. I have the same issue on one
of my
electric sailplanes using the 8103
Dave
Pat,
You can use channel 8. It is switched from 100% one direction to 100% the
other direction when the Gear/Butterfly switch is flipped. If you are not
using both positions of the switch for different wing cambering/Landing
flaps you don't need to do anything special.
If you want a typical
Pat McCleave wrote:
Hi Guys,
I am in the process of setting up a Pulsar 2000 with a JR8103 radio and need
some help.
For all your 8103 programming needs:
http://isoar.ca/~andrewm/rc/JRxp8103/
Miami Mike's article is probably most applicable.
--
Andrew E. Mileski
RCSE-List facilities provided by
Pat,
When you find out, let us all know. I have the same issue on one of my
electric sailplanes using the 8103
Dave Moore
- Original Message -
From: Pat McCleave [EMAIL PROTECTED]
To: RCSE [EMAIL PROTECTED]
Sent: Sunday, March 14, 2004 8:29 PM
Subject: [RCSE] Programming Help
Hi
6 matches
Mail list logo
