Hi Bruce and Marco,
I use a personal efficient workflow from Topodroid to Therion.
First I have unified symbols in Topodroid and Therion, so that the
symbols used in one are understood by the other. Both use semantic
symbology, so the graphic symbol in each does not matter, only the
attribut
Hi Wookey,
Yours problems with the high density line segments are from the Setting
selection.
In "Settings/Sketching/Lines/Lines style" you can select the segment
density type (Fine, Normal or Coarse). But it's better to use the
Bezier option.
The Bezier lines are like the lines in Therio
Hi,
I (Evaristo Quiroga) arrive tomorrow 23/8/2018 in the afternoon, and I
will be there until 8/27/2018. See you at the welcome ceremony.
Regards,
Evaristo.
El 21/08/2018 a las 15:38, Stacho Mudrak via Therion escribió:
Hi everybody,
eurospeleo meeting in Austria starts tomorrow. Me an
Hi,
I have shots with duplicate flags. I want hide this shots in the export
models (loch and kml). In survex 3d, it's easy in Aven you can hide the
duplicate shots.
Any suggestion?
Regards,
Evaristo.
___
Therion mailing list
Therion@speleo.sk
htt
egs?
Bruce
*From:*Therion *On Behalf Of *Evaristo
Quiroga via Therion
*Sent:* Thursday, 7 June 2018 5:40 AM
*To:* therion@speleo.sk
*Cc:* Evaristo Quiroga
*Subject:* [Therion] Conflict between "extend ignore" command and
inverse legs
Hi,
I usually do my surveys doing inverse measur
Hi,
I usually do my surveys doing inverse measures. I go ahead by
positioning the points, and doing the measurements with the distoX2
looking back (inverse) and finally do the splay measurements at that
destination point. My assistant is in origin point, and don't have
survey experience, is o
STAKE. The
issue is closed.
Best regards and thanksfor the patience.
Evaristo.
El 17/05/2018 a las 15:02, Wookey via Therion escribió:
On 2018-05-17 09:25 +0200, Evaristo Quiroga via Therion wrote:
El 17/05/2018 a las 0:36, Olly Betts escribió:
I think the formula is too comp
Hi Olly,
El 17/05/2018 a las 0:36, Olly Betts escribió:
I think the formula is too complicated. I purpose a simpler formula, like:
If bearing <=180
AverageBearing = (bearing + (backbearing -180))/2
else
AverageBearing
I think Therion subtract the magnetic declination before to transfer
data Survex. Now to compare better I have put magnetic declination to 0.
declination 0.00 degrees
Data transferred to Survex by the "data.svx" file
*data normal from to tape compass clino
1 2 0.0
Evaristo.
El 16/05/2018 a las 14:17, Evaristo Quiroga via Therion escribió:
Hi,
I have data from a survey with fore/back sight compass and clino. I
have detected a Therion bug calculating the average data, comparing
with the error loops with Auriga, Visualtopo, Compass and Therion.
Se
Hi,
I have data from a survey with fore/back sight compass and clino. I have
detected a Therion bug calculating the average data, comparing with the
error loops with Auriga, Visualtopo, Compass and Therion.
See the next compare.
Example from the data in .th file:
data normal from to length
Hi,
It's possible you have to specify what water-flow type you want, lyke this:
text es "point water-flow:permanent" "curso de agua permanente"
text es "point water-flow:intermittent" "curso de agua temporal"
Regards,
Evaristo
El 08/05/2018 a las 8:56, Torsten Schnitter via Therion esc
The new messages appear from line 859 until the end.
El 16/04/2018 a las 19:32, Evaristo Quiroga via Therion escribió:
Hi,
I have compiled the messages that appeared not translated into the
local languages in Loch. I have added them to the file "loch.po",
which I attach.
T
Hi,
I have compiled the messages that appeared not translated into the local
languages in Loch. I have added them to the file "loch.po", which I attach.
The spanish translation is completed.
To translate to other languages you can copy the new lines and translate
the messages "msgstr".
Evar
open and edit the .map file changing
the E by W in the coordinates. /
///Finally I rename the ".map" file to match the first created png
file./
It works but it is a bit cumbersome.
Regards,
Evaristo.
El 26/03/2018 a las 13:25, Evaristo Quiroga via Therion escribió:
The revers
The reverse engineering is not with the PDF. Martin do a good job here
putting in all the therion output pdf a comment with the reference. You
only have to open the file and search "thCalibrate". You found the next
text:
/
///thCalibrate0 (X=-22.16017pt, Y=260.12132pt, L=-0.3641990570,
F=42.29
Thanks Nikita.
First, I thought about doing it as you say. But I want an image that
only has the survey and the rest is transparent, so putting the grid
complicates my work.
Then I discovered that the "calibrate bitmap" option does all the work.
But it's not working.
We don't need the gridbe
Thanks Bruce, the transparent statement is working perfectly. Now I have
only to resolve the ".map" problem.
Regards,
Evaristo.
El 26/03/2018 a las 5:43, Bruce Mutton via Therion escribió:
Try ‘colour map-bg transparent’ in your layout. Around pg 54 of the
Therion Book.
If it is working
Hi,
I want to export a map to georeferenced PGN. I am using the Xtherion
"Help\Calibrate bitmap" function to register a PDF map to PGN, like
explain in the next message.
https://www.mail-archive.com/therion@speleo.sk/msg02593.html
ThePNG is created appropriately, but I have problems with the
Hi,
Is it possible to include PDF or SVG files in METAPOST Macros?
I want to define complicate symbols like trees to therion. It would be
easy if I can include a PDF o SVG file and define the scale in a
METAPOST macro.
If not possible, do you know a software to translate a PDF or SVG to
Met
Hi,
After testing I have found a few typos, but also another problem. There
are menus and configuration options that are not translated.
I have searched them in "loch.po" file, and they do not appear, that's
why I have not been able to translate them. If you open the spanish Loch
version, an
escribió:
On Sun, Mar 11, 2018 at 2:31 AM, Wookey via Therion <mailto:therion@speleo.sk>> wrote:
On 2018-03-11 00:13 +0100, Evaristo Quiroga via Therion wrote:
> Thanks Olly.
>
> I have already translated it. Now, What do have I do. Wait for a new
> compilat
Thanks Olly.
I have already translated it. Now, What do have I do. Wait for a new
compilation, or I can install it directly in the program directory to run.
Regards,
Evaristo.
El 10/03/2018 a las 22:39, Olly Betts escribió:
On Sat, Mar 10, 2018 at 07:05:41PM +0100, Evaristo Quiroga via
Hi,
What file I have to translate to Spanish for Loch? "loch.po" in
/loch/locale?
Thanks
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
I have translate the Therion Map Header to a new language: Catalonian;
using the "ca" abbreviation.
And also updated the Spanish translation for lasts terminology
incorporations.
Can someone put the new "texts.txt" file in the Github? So it can be
incorporated into the next compilation.
Th
.
S.
On 15 February 2018 at 17:34, Evaristo Quiroga via Therion
mailto:therion@speleo.sk>> wrote:
I see today (2018/02/15) a new development Therion version
(/e1ff09b <https://github.com/therion/therion/tree/e1ff09b>)/,
with windows compilation.
In the github, I se
translation
of the texts.txt and xtexts.txt, and I had asked if someone can compile
a new windows version to incorporate the new spanish translation.
Thanks,
Evaristo.
El 03/02/2018 a las 20:51, Evaristo Quiroga via Therion escribió:
Hi,
In order to accelerate the learning curve of Therion, a
(ropes and anchors)?
Evaristo.
El 02/02/2018 a las 18:25, Martin Sluka via Therion escribió:
Hi Evaristo,
may you, please, add this to wiki?
m.s.
2. 2. 2018 v 17:32, Evaristo Quiroga via Therion <mailto:therion@speleo.sk>>:
Hi Vladimir,
Finally I have choose the easy way (see
elays with a Bezier line. This allows me better control,
because the automatic rebelay curves don't always fit well in the pit
shape.
Evaristo, if you want to work on the code, I can try to help. The
above are all nice ideas, like many others, but I personally don't
have the time
Hi,
I greatly appreciate the improvement made by Vladimir at the rope line
symbol.
https://www.mail-archive.com/therion@speleo.sk/msg05992.html
With this symbol you can control if the rope section has anchors and
rebelays, as line options. This options are global to the line: have or
not r
Hi Bruce,
To me is a desirable feature too. Now I have to multiply by a factor the
real scale points to do the same.
Evaristo.
El 22/01/2018 a las 3:27, Bruce Mutton via Therion escribió:
I was just adding some cross sections to a drawing, and it occurred to
me to try the -scale option, a
Hi Nikita,
Yes, I have overcome the problem renaming the closure station or other
station, to break the loop and see the legs without error correction
deformation, to detect better the error origin.
Evaristo.
El 20/01/2018 a las 10:23, Nikita Kozlov via Therion escribió:
That above is tru
Hi John,
I have experienced the same zoom problems in Windows with the scroll
wheel use or + -. If you play with the + - you see, the trace and the
background image are well placed at 25%, 50%, 100% ,200% and 400%. When
you push further this scales the trace and background image are wrong
pl
tations.
El 19/01/2018 a las 18:54, Martin Sluka via Therion escribió:
19. 1. 2018 v 17:59, Evaristo Quiroga via Therion :
Now what I want is to do is the same I do in Compass. Run a compilation with
loop closure and another without, breaking the loops. If you see side by side
the two models
display the loop errors by color, so you
get the information quickly graphically.
Am 2018-01-19 15:19, schrieb Martin Sluka via Therion:
If there is active Survex loop closure on the end of log of
compilation is the list of loops and their errors there.
m.s.
19. 1. 2018 v 13:06, Evaristo Quiroga
Is it possible to disable loop closure in Therion to export a 3d model?
I want to compare two 3d models in Aven: one with loop closure and other
without loop closure, to find where has the error loop.
___
Therion mailing list
Therion@speleo.sk
https:
Is it possible to disable loop closure in Therion to export a 3d model?
I want to compare two 3d models in Aven: one with loop closure and
other without loop closure, to find where has the error loop.
___
Therion mailing list
Therion@speleo.sk
https:
upper station in current elevation XVI
Please test this workaround... I hope it is working
06.01.2018 02:03, Evaristo Quiroga via Therion пишет:
It's a program bug that wrong calculate the Y coordinate. To resolve
properly it has to be corrected by
solve the problem.
It's a program bug that wrong calculate the Y coordinate. To resolve
properly it has to be corrected by Therion programmers.
Evaristo.
El 05/01/2018 a las 19:43, Evaristo Quiroga via Therion escribió:
Hi Xavier,
Thanks for the link, previously I don't found anyt
on interface or editing the
coordinates with a text editor in the xvi file. I wish this bug could
be corrected one day.
Best
Xavier
Le 05-Jan-18 à 17:28, Evaristo Quiroga via Therion a écrit :
Hi,
I have this problem: the xviresult file of the morphing processwith
extended profiles is
Hi,
I have this problem: the xviresult file of the morphing processwith
extended profiles is erroneous. The centerline and sketch don't are
superposed. The xvi is at 0 0 position, but the sketch are very
displaced in Y direction (X it's OK), far 35000 units.
I can do a manual solution bu
Hi,
I have this problem: the xviresult file of the morphing processwith
extended profiles is erroneous. The centerline and sketch don't are
superposed. The xvi is at 0 0 position, but the sketch are very
displaced in Y direction (X it's OK), far 35000 units.
I can do a manual solution bu
Thanks Marcus,
I don't know the Qave application. I will take a look.
Evaristo.
El 04/10/2017 a las 19:48, Martin Sluka via Therion escribió:
Have you tried for Android application Qave?
ms
On Oct 04, 2017, at 07:36 PM, Evaristo Quiroga via Therion
wrote:
Hi Marcus,
I don'
Hi Graham,
Yes Topodroid export every scrap as an individual .th2, and the
X-Section too in others individuals .th2.
The .th file is only one for survey (surveying day).
You can do a unique scrap for all the day too. I think you only have to
do a new scrap with galleries under others or scrap
th help of Excel,
let's say.
Isn't enough to check join of two scraps by "debug on" and correct it
manually?
ms
On Oct 04, 2017, at 06:03 PM, Evaristo Quiroga via Therion
wrote:
Hi,
Another approach is to copy&paste the two scraps in a new .th2 file.
But now I h
Hi,
Another approach is to copy&paste the two scraps in a new .th2 file.
But now I have the two scraps in the same new file but there are
displaced to the same origen in Xtherion map editor.
Is it possible to move entirely a scraps to another position in the
Xterion map editor , like we move
scale. The number is in
correlation with the screens 72 dpi, 100 dpi Xtherion insert image, the
1:100 scraps scale and other parameter I don’t understand.
Evaristo Quiroga
El 03/10/2017 a las 14:08, Evaristo Quiroga via Therion escribió:
I have to join scraps in different .th2 files. The
Hi Nikita,
Nice to see you here too.
How do you insert the pdf in the background? The files supported are
only: png, jpeg, gif, pnm, ppm and xvi.
I have convert a example pdf to png in Photoshop, but I have to correct
the scale and ppi to can put correctly in the background.
El 03/10/201
I have to join scraps in different .th2 files. The semi-automatic join
doesn’t do a good job. I need to redraw the scraps wall near the join to
do a better work.
Can I insert in the Xtherion map editor a scrap from another .th2 file
in the background to do a better position of the scrap walls
account the
shot in the cave statistics, you may use the flag : flags
duplicate (p19 of the thbook).
Cheers,
Xav
Le 25 sept. 2017 à 15:49, Evaristo Quiroga via Therion
mailto:therion@speleo.sk>> a écrit :
Hi Phil,
I have made a xvi file like you comment, but I want to use it to
mor
Therion escribió:
Evaristo - check Samples in Therion installation. There is one sample
with exactly what you want. But there are used only points
perpendicular to survey shots and command „dimension“. Those samples
should be last part of Thbook too.
m.s.
25. 9. 2017 v 21:32, Evaristo Quiroga via
:
Hi Evaristo,
Yes you can, you can create a .xvi file by running therion with just
the .th file of the survey. It will create a .xvi file that you can
use in your .th2 file to do a better sketch morphing.
Best,
Phil
On 25 Sep 2017, at 21:32 PM, Evaristo Quiroga via Therion
mailto:therion
In my transition from paper to paperless survey, I have do a few survey
recording only the data from the DistoX2 with the tablet and draw the
sketch in paper.Now I am try to do a better sketch morphing using the
splays data.
It is possible to use the splay shots to make extra points to do bett
53 matches
Mail list logo