Hi All,
Using the A.01.01 DOS version of the 3048A code and the B.01.01 version
of the HP-IB Command Library (thanks Adrian), with an 82335 GPIB card,
works with DOS6.22, DOS7.1 (WIN98) and FREEDOS1.1. All that's required
is to load the HPIB.SYS (config.sys) and ensure the selected ROM
The overall result is a bit disappointing, given what I set out to
accomplish. I can now compare the results from PN3048 in baseband noise
mode to get absolute measurements, which will be useful. The DOS code
produces calibration and result files which are unreadable to the RMB
version and
David,
the 82335 drivers came with the complete SW package that I sent you.
I don't know if the drivers and SW are running with any more recent or
non MS versions than MS-DOS 6.0.
But, it's as easy to find out as it gets. Back in the day the whole OS
fitted on a floppy disk and 640k of memory,
The easiest way of getting a new well supported version of
DOS, is to download FreeDOS. Anything that worked on any
version of MSDOS will run under FreeDOS... and so much more!
-Chuck Harris
davidh wrote:
Folks,
I'm also working on getting the MSDOS version running. What is the most recent
Folks,
I'm also working on getting the MSDOS version running. What is the most
recent version of DOS that people have found to work with the A 01.01
version.
Also, can anyone advise where the command drivers for the 82335 can be
found?
Cheers,
david
Hi Adrian,
Got the spec lines
Said,
are you using the Opt. 311 (MS-DOS) software?
I don't know of any more recent versions.
To answer your initial question:
You can not change anything on the diagram _after_ the measurement, not
even the title.
The spec lines will be visible only when you have defined them prior to
Hi Adrian,
Got the spec lines working now, thanks!
Yes, the DOS version. I was hoping for an updated user manual for that version
as the manual describes the other software version, and maybe a slightly later
sw version. Oh well.
Thanks for you help!
Said
On Feb 17, 2012, at 5:06, Adrian
Hello team,
I am trying to get an HP 3048A system up and running, and I am having
problems with enabling spec limit lines on the graph.
I can enter the spec line data under the manipulate results then spec
lines menu, but the lines I entered are not visible. There are the standard
spec