... and also here in 2.6.20-9-generic with Asrock MB K8NF6G-VSTA with
chipset NVIDIA NF-6100-405
--
[Feisty] Inaudible audio upon resuming from suspend-to-disk
https://launchpad.net/bugs/80893
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubu
I also have no sound on an ASROCK motherboard K8NF6G-VSTA (with AMD
Sempron 2800) with Feisty. Amarok is pretending to be playing happily,
but no sound comes out. I also did a trial with Gutsy tribe 5 from Live
CD, but it gave no better result. My original bug report had been closed
although there
After updating today all is the same as described above. Requested outputs
below; some observations:
My (cheap) loudspeakers give an annoying hum when plugged in and MB is in off
state. It disappears during boot at about the point when "Loading kernel
modules" flashes by. The hum never goes away
Public bug reported:
Installation is Kubuntu Feisty Herd2 amd64 from alternate CD on Asrock
MB K8NF6G-VSTA (NVIDIA chipset NF-6100-405) with Sempron64. Working
quite well and smooth - including Beryl - but no sound. Loudspeaker in
panel has red dot with white cross on it. I suppose there is no sou
Public bug reported:
Installation: Kubuntu Feisty alternate-amd64 with Sempron64 on
motherboard Asrock K8NF6G-VSTA (Chipset NVIDIA NF-6100-405). Kernel is
2.6.20-5-lowlatency.
selecting "Suspend" or "Hibernate" on Log Out results in the very same
behavior - screen is blanked and locked, but nothi
Public bug reported:
Binary package hint: linux-source-2.6.20
No sound with kernel 2.6.20-13 generic on Asrock motherboard K8NF6G-
VSTA (NVIDIA chipset NF-6100-405) with Sempron64 2800+.
Sound had been present in 2.6.20-10, and was lost in -11, -12, and -13.
Amarok is "playing" (judged by the v
forgot the dmidecode. I am attaching it now
** Attachment added: "output of dmidecode"
http://librarian.launchpad.net/6519266/dmidecode.txt
--
[Feisty] suspend and hibernate fail on MB Asrock K8NF6G-VSTA
https://launchpad.net/bugs/81137
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.c
Indeed the sound is working with kernel 2.6.20-6.11. I tested both the
2.6.20-6-generic and the 2.6.20-6-lowlatency version, and both are doing
fine with sound. Both also fine with nvidia driver for graphic.
Suspend and Hibernate have issues; see my extension to bug report #81137
--
no soundcard
With kernel 2.6.20-6.11 in both flavors 2.6.20-6-lowlatency and
2.6.20-6-generic the Log Out options Suspend and Hibernate are working,
however, there are two issues:
Hibernate: after restart the kernel choices are offered again for
selection, and the default entry will be used unless manually cho
Public bug reported:
no sound after resuming from either suspend or hibernate; sound ok after
fresh boot.
Feisty with kernel 2.6.20-6-generic for x86-64 on motherboard Asrock
K8NF6G-VSTA (using chipset Nvidia NF-6100-405).
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirme
Hi Bryce,
here the requested info:
Two computers running Ubuntu Intrepid, and both updated before this test. Both
wired to the network.
athlon: a desktop with screen resolution 1152x864
aa1: a netbook with screen resolution 1024x600, @ 10.0.0.66
ssh connections go from athlon to aa1.
attached (
** Attachment added: "/etc/X11/xorg.conf"
http://launchpadlibrarian.net/20238243/xorg.conf
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/20238275/Xorg.0.log
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: "lspci-nnvv.txt"
http://launchpadlibrarian.net/20238294/lspci-nnvv.txt
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubu
I have a similar issue with a Ubuntu Intrepid install on an Acer Aspire
One netbook, where gnome-system-monitor plus Xorg consume 60+% CPU,
shown both by top and g-s-m.
Running top in maximized gnome-terminal after cold start. CPU usage from
Xorg:1-3%, total: 3-5%
Starting g-s-m and hiding behind
Public bug reported:
Binary package hint: xorg
Running ubuntu intrepid on Acer Aspire One A110L.
~$ uname -a
Linux aa1 2.6.27-8-generic #1 SMP Thu Nov 6 17:33:54 UTC 2008 i686 GNU/Linux
Xorg appears to be defaulting to a 96x96dpi screen resolution, resulting in
fonts in the login screen to
** Attachment added: "the xorg.log after starting with default conf"
http://launchpadlibrarian.net/19571732/xorg.log.default
--
[ubuntu intrepid] Xorg is confused about its settings
https://bugs.launchpad.net/bugs/296878
You received this bug notification because you are a member of Ubuntu
Bu
** Attachment added: "the xorg.log file after starting with modified xorg.conf"
http://launchpadlibrarian.net/19571756/xorg.log.mod
--
[ubuntu intrepid] Xorg is confused about its settings
https://bugs.launchpad.net/bugs/296878
You received this bug notification because you are a member of Ub
** Attachment added: "the xorg.conf file AFTER modification"
http://launchpadlibrarian.net/19571748/xorg.conf.mod
--
[ubuntu intrepid] Xorg is confused about its settings
https://bugs.launchpad.net/bugs/296878
You received this bug notification because you are a member of Ubuntu
Bugs, which i
Public bug reported:
When the main user is running firefox on a fresh instll and tries to
watch a flash video e.g. on youtube, it does not work because the plugin
is missing. That user can install those missing plugins as offered by
firefox, and it works. However, when switching to a "Guest" accou
*** This bug is a security vulnerability ***
Public security bug reported:
Binary package hint: gparted
Running Ubuntu Intrepid on an Acer Aspire One A110L. GParted recognizes
the built-in hard disk (an 8GB SSD actually) under /dev/sda, and it does
recognize a USB stick (e.g. at /dev/sdb), but i
Public bug reported:
Binary package hint: xrandr
Two computers running Ubuntu Intrepid are connected in a local network.
On each one I can execute xrandr in a terminal and get a proper
response.
However, when I open a terminal and ssh from either computer into the
other computer, and execute xra
Public bug reported:
Binary package hint: xserver-xorg-video-intel
The s-video output of my system does work neither with a PAL nor with a
NTSC tv set, and I cannot change the default neither by using xrandr nor
by modifying the xorg.conf. It seems that both xrandr and xserver don't
know the "TV
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/19671510/xorg.conf
--
[Ubuntu Intrepid] xrandr or xserver or both are not supporting TV Format changes
https://bugs.launchpad.net/bugs/298422
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
** Attachment added: "xorg.log with only a tv set connected"
http://launchpadlibrarian.net/19671524/xorg.log
--
[Ubuntu Intrepid] xrandr or xserver or both are not supporting TV Format changes
https://bugs.launchpad.net/bugs/298422
You received this bug notification because you are a member o
** Attachment added: "output of command xrandr --verbose when bot vga and tv
set are connected"
http://launchpadlibrarian.net/19671535/xrandr.verbose
** Description changed:
Binary package hint: xserver-xorg-video-intel
The s-video output of my system does work neither with a PAL nor
Public bug reported:
Binary package hint: firefox
Running Ubuntu Intrepid on an Acer Aspire One netbook (screen size
1024x600) with Firefox 3.0.4.
The Print dialog box is too big to completely fit on the screen,
although there is sufficient space in each of the tabs.
** Affects: firefox (Ubuntu
Public bug reported:
Binary package hint: hardware-monitor
Hardware Monitor 1.4 is running as applet in the gnome-panel. When
right-clicking and selecting 'About', a dialog box comes up, providing
some about information. Of the two buttons 'Credits' and 'Close', the
close button shows response t
Public bug reported:
Binary package hint: hardware-monitor
Running Ubuntu Intrepid on netbook Acer Aspire One A110L. Hardware
Monitor run as applet in the panel does correctly report wired ethernet
activity, but never sees wireless.
Wireless is on 'wlan1'. Wireless is using driver 'ath5k_pci' an
Public bug reported:
Attempts to transfer large files via wireless between two computers on a
local network consistently fail, while wired transfers do work.
Setup: a local network, all computers running ubuntu intrepid. One
desktop with wired connection has a large file (>500MB, random data),
th
** Attachment added: "lspci-nnvv"
http://launchpadlibrarian.net/20075762/lspci-nnvv
--
[ubuntu intrepid] File transfer through wireless in local network consistently
fails
https://bugs.launchpad.net/bugs/303723
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: rhythmbox
when rhythm box is run on a netbook (acer aspire one) with screen size
1024x600, and the cover window on the lower left end of the program is
enlarged beyond a certain size, then the program's bottom end extends to
below the lower screen end. Wh
*** This bug is a duplicate of bug 138845 ***
https://bugs.launchpad.net/bugs/138845
Pedro, I believe you are mistaken in your interpretation of the cause
for the bug. This jumping behaviour is seen in a number of programs, and
clearly related to the screen height of only 600pixel, as is typic
Public bug reported:
Upgraded Ubuntu from 8.04 to 8.10 while using the netbook remix (worked
well).
all packages (go-home-applet, window-picker-applet, maximus, ume-launcher,
desktop-switcher) are installed. But when trying to install human-netbook-theme
I get the message from synaptic:
h
Public bug reported:
Binary package hint: usb-creator
my 2GB SD card is recognized in my laptop via the build-in sd card
reader and can be read from/written to, usb-creator does not allow using
it as a device to create the iso on. But when the same card is inserted
in a USB-stick adaptor, which t
I have a fresh install of ubuntu intrepid and seem to have the same
problem with the monitor modem applet. I use it with the remix
interface.
These are the applet responses: (my language setting is German)
1) resting the mouse pointer over it, it shows (in English): "Could not get
connection time
Public bug reported:
Binary package hint: gcompris
GCompris' window extends beyond the bottom of the screen when using a netbook
(Acer Aspire One A110l) with screen size 1024x600.
Same problem is applicable also to the GCompris administration
** Affects: gcompris (Ubuntu)
Importance: Undec
Public bug reported:
Binary package hint: tuxpaint
Thw window of tuxpaint extends beyond bottom screen border when used on
a Netbook (Acer Aspire One A110L) with screen size 1024x600.
** Affects: tuxpaint (Ubuntu)
Importance: Undecided
Status: New
--
[ubuntu intrepid] Tux paint p
Public bug reported:
I use Ubuntu Intrepid on Acer Aspire One A110L and are trying to use
both built-in card readers. When the netbook is booted with both readers
containing SD cards, both cards are mounted and can be used. However,
the command "fdisk -l" shows only the SSD (which in my system con
Public bug reported:
Some DVB-T USB sticks such as the Terratec Cinergy T USB XE need the
firmware af9005.fw to run. This firmware is available, but not provided
with Ubuntu.
The firmware is available e.g. at this site:
http://ventoso.org/luca/af9005/ . It should be part of Ubuntu. In case
it is
I have a similar issue with a Ubuntu Intrepid install on an Acer Aspire
One netbook, where gnome-system-monitor plus Xorg consume 60+% CPU,
shown both by top and g-s-m.
Running top in maximized gnome-terminal after cold start. CPU usage from
Xorg:1-3%, total: 3-5%
Starting g-s-m and hiding behin
Geir, what do you mean by "/var/log/Xorg.0.out" ? There is no such file
on my system. If you meant "/var/log/Xorg.0.log", this one is already
included as xorg.log above-
output of `lspci -vvnn` is attached
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Incomplete => New
** Attac
Public bug reported:
Binary package hint: gpaint
running ubuntu intrepid on an Acer Aspire One A110L.
gpaint cannot be used in a useful way, because its window is extending
beyond the lower end of the desktop. Then when clicking on any spot in
the drawing area, or the tools area, or the color se
** Description changed:
Binary package hint: gpaint
running ubuntu intrepid on an Acer Aspire One A110L.
gpaint cannot be used in a useful way, because its window is extending
beyond the lower end of the desktop. Then when clicking on any spot in
the drawing area, or the tools area
Public bug reported:
Binary package hint: ghex
running ubuntu intrepid on an Acer Aspire One A110L, which is a netbook
with screen size 1024x600.
after starting ghex I it has a small window. I can maximize ok, and load
a file. Any subsequent click anywhere in the program window makes it
jump up,
** Changed in: xrandr (Ubuntu)
Status: Incomplete => New
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bug
Public bug reported:
Binary package hint: mail-notification
Running mail notification 5.4 as applet in the panel of an up-to-date
ubuntu intrepid install on multiple computers. All mail boxes are imap
boxes. After booting the computer, the number of mails and the summary
are shown correctly. Howe
Public bug reported:
Binary package hint: hplip
tried this on three different computers running ubuntu intrepid.
I can print to connected printers via net (laserjet), via USB (deskjet),
and via parallel (deskjet), but HP-Device Manager reports "No installed
HP Devices Found". I can manually defi
Log file created by hp-check -t is attached.
At the time of running the command a hplj3030 was attached via ethernet
and a deskjet 722c via an USB-to-parallel cable. Both printers were
working fine.
And cups is also installed and running:
~$ /etc/init.d/cups status
Status of Common Unix Printi
Public bug reported:
Fresh install of kubuntu Intrepid alpha 5, then full update. Attempt
detection of wlan hardware with Hardware Drivers Manager, which finds
and activates "wl", and also proposes fwcutter usage to get "Broadcom
B43 wireless driver". This downloads the firmware without complaint,
now what ? after updating to kernel 2.6.20-11-generic I have no sound at all,
not even after a cold reboot!
Amarok is playing its visuals, but no sound.
(Asrock MB K8NF6G-VSTA with chipset NVIDIA NF-6100-405)
--
[Feisty] Inaudible audio upon resuming from suspend-to-disk
https://launchpad.net/
I not only did a cold reboot, I even unplugged the MB for >1h before
restarting 2.6.20-11 generic -- but no sound.
Restarting 2.6.20-10-generic did give sound!
Looking with Kinfocenter under Sound I found these differences:
-10: (with sound)
Audio devices: HDA Generic
Mixers: Realtek ID862
-11:
Public bug reported:
CPU AMD64 Sempron 2800+ always runs at its maximum 1600 MHz on motherboard
Asrock MB K8NF6G-VSTA with chipset NVIDIA NF-6100-405 even with a CPU load of
<10%.
kernel: 2.6.20-11 generic / i686
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
No
Public bug reported:
running AMD64 Sempron 2800+ on motherboard Asrock MB K8NF6G-VSTA with chipset
NVIDIA NF-6100-405
kernel: 2.6.20-11-generic / i686
KSysGuard has under "Hardware Sensors" only k8temp with Core0_Temp and
Core1_Temp (this latter one always being zero) but no fan speed, neither
f
well, this bug report had been on suspend/hibernate problems with audio,
and now I can't say whether this is solved because I don't have any
sound in the first place.
That is for sure. Otherwise I am not sure on anything but bug #92909 is
on a different sound chip. My motherboards is Asrock MB K8N
Public bug reported:
running AMD64 Sempron 2800+ on motherboard Asrock MB K8NF6G-VSTA with chipset
NVIDIA NF-6100-405
kernel: 2.6.20-11-generic / i686
KSysGuard has under "Hardware Sensors" only k8temp with Core0_Temp and
Core1_Temp (this latter one always being zero) but no fan speed, neither
f
no sound whatsoever with 2.6.20-12 generic. In fact, it behaves EXACTLY
the same as with -11, including the observation about humming and
closed/open circuitry when cold booting and resuming. (I still get
proper sound with -10).
Shouldn't the fact that -11 and -12 are using the same Audio device a
Well, the action on this bug report wasn't exactly overwhelming ...
In the meantime I discovered how I can get the modem to work by brute
force, but someone more competent than me needs to change this into
something presentable!It seems to be solely an issue of file
permissions.
what I did: chang
The problem still persists in Jaunty (uname: 2.6.28-3-generic #4 ... Dec 12
22:48:15 UTC 2008).
Xorg.log says:
LVDS 1024x600
DPI 96x96
physical screen size 195x113
Again three pairs of numbers are inconsistent among themselves (e.g.
1024pixel width @96dpi would result in screen width of 271m
** Attachment added: "file created with: ~$ sudo get-edid > get-edit.txt"
http://launchpadlibrarian.net/20632938/get-edit.txt
--
Defaulting to 96 dpi rather than 133 dpi
https://bugs.launchpad.net/bugs/296878
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I tried this Jaunty
uname -a
Linux ubuntu 2.6.28-3-generic #4-Ubuntu SMP Fri Dec 12 22:48:15 UTC 2008 i686
GNU/Linux
and find no differecne to Intrepid
xrandr --query and --properties provide this info:
ubu...@ubuntu:~$ xrandr --query
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 102
The problem is NOT solved. I have upgraded the bios to 1.60 and made the
adjustments as specified by Loic Martin above. No further modifications to the
bios defaults. The cpu is a Sempron 2800. The uname -1 response is:
Linux ... 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
in case you are wondering: I meant to type uname -a (not -1), sorry
--
[Feisty] suspend and hibernate fail on MB Asrock K8NF6G-VSTA
https://bugs.launchpad.net/bugs/81137
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bu
Public bug reported:
Binary package hint: synaptic
Ubuntu karmic install; using Synaptics to search for dvd rippers:
clicking on the search button and entering 'rip' as search term finds
both acidrip and dvdrip; independent of whether I search only within
names or within names and descriptions.
Putting Jaunty RC netbook remix on an USB stick and booting into live
system on my Acer Aspire One does bring wlan up out-of-the-box, which
fixes my original bug report.
As far as I can see from lsmod, we are now back to the very same
settings as we had with Intrepid? But some further clean-up see
Public bug reported:
Jaunty RC netbook remix is run as live session from USB stick on an Acer
Aspire One in the 'Ubuntu Netbook Desktop' mode.
When the Quit icon is clicked, the 'Quit session' dialog box comes up.
It offers a Cancel button, but clicking on the Cancel button results in
no action (
Public bug reported:
Binary package hint: nautilus
running ubuntu karmic on netbook Acer Aspire One 110L.
when attempting to connect to a second computer via ssh by entering e.g.
ssh://10.0.0.30 into the location line of nautilus, nautilus crashes.
upon restarting nautilus it shows the location
Well, I could do this: after enabling apport I replicated the error,
and reported under bug #400319. This failure also produced an error in
usplash, which is reported as bug #400322.
I can't do backtracing.
In case it helps: when I mounted the external folder as nfs share (as
opposed to access i
I can confirm that the size issue is fixed, but a lot of other issues
were introduced. Two of them are shown in the attached screenshots: The
AC adaptor is shown as selected (doesn't show in thre screenshot
-another bug?) on the left side, but battery details are shown on the
right side. And a batt
** Attachment added: "730 W in a netbook???"
http://launchpadlibrarian.net/29151028/Screenshot-Power%20Statistics-1.png
--
[karmic] Power History windows too big for netbook screen
https://bugs.launchpad.net/bugs/377576
You received this bug notification because you are a member of Ubuntu
Bug
what actually is the metric for poor performance? I can offer this:
computer1 is connected to my local net via fast ethernet. It has a file
of 500MB containing pseudo random numbers. I access this from computer2
via WLAN using:
scp 10.0.0.30:/home/test500mb /dev/null
and get these results for tra
Sebastien,
I have no idea what ubuntuone is, but I searched under synaptics and found 4
files being installed and having ubuntuone in their name (ubuntuone-client,
ubunutone-client-gnome, and 2 files python-ubuntuone-xxx). I removed them and
tried nautilus entering location ssh://xxx : it still
** Changed in: xrandr (Ubuntu)
Status: Incomplete => New
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bug
Public bug reported:
Binary package hint: mail-notification
Running mail notification 5.4 as applet in the panel of an up-to-date
ubuntu intrepid install on multiple computers. All mail boxes are imap
boxes. After booting the computer, the number of mails and the summary
are shown correctly. Howe
screenshot attached; Whatever is on the bottom of the screen - it is
invisible on a 1024x600 screen. I wonder what your netbook screen is?
this shot taken on Easy Peasy, which I installed after intrepid got
messed up completely after an update. It is actually running more
reliably for me!
** Att
Public bug reported:
Binary package hint: hardware-monitor
Hardware Monitor 1.4 is running as applet in the gnome-panel. When
right-clicking and selecting 'About', a dialog box comes up, providing
some about information. Of the two buttons 'Credits' and 'Close', the
close button shows response t
Public bug reported:
Binary package hint: hardware-monitor
Running Ubuntu Intrepid on netbook Acer Aspire One A110L. Hardware
Monitor run as applet in the panel does correctly report wired ethernet
activity, but never sees wireless.
Wireless is on 'wlan1'. Wireless is using driver 'ath5k_pci' an
Public bug reported:
Attempts to transfer large files via wireless between two computers on a
local network consistently fail, while wired transfers do work.
Setup: a local network, all computers running ubuntu intrepid. One
desktop with wired connection has a large file (>500MB, random data),
th
** Attachment added: "lspci-nnvv"
http://launchpadlibrarian.net/20075762/lspci-nnvv
--
[ubuntu intrepid] File transfer through wireless in local network consistently
fails
https://bugs.launchpad.net/bugs/303723
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: rhythmbox
when rhythm box is run on a netbook (acer aspire one) with screen size
1024x600, and the cover window on the lower left end of the program is
enlarged beyond a certain size, then the program's bottom end extends to
below the lower screen end. Wh
*** This bug is a duplicate of bug 138845 ***
https://bugs.launchpad.net/bugs/138845
Pedro, I believe you are mistaken in your interpretation of the cause
for the bug. This jumping behaviour is seen in a number of programs, and
clearly related to the screen height of only 600pixel, as is typic
Hi Bryce,
here the requested info:
Two computers running Ubuntu Intrepid, and both updated before this test. Both
wired to the network.
athlon: a desktop with screen resolution 1152x864
aa1: a netbook with screen resolution 1024x600, @ 10.0.0.66
ssh connections go from athlon to aa1.
attached (
** Attachment added: "/etc/X11/xorg.conf"
http://launchpadlibrarian.net/20238243/xorg.conf
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/20238275/Xorg.0.log
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: "lspci-nnvv.txt"
http://launchpadlibrarian.net/20238294/lspci-nnvv.txt
--
[ubuntu intrepid] xrandr acting incorrectly
https://bugs.launchpad.net/bugs/298078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubu
Public bug reported:
Binary package hint: xserver-xorg-video-intel
Running mythtv client under ubuntu 9.04 on two different systems, both
with intel graphics, results in either a blue screen with the system
remaining responsive, or in a complete system crash. Attemting to play
an mpg video on eit
Public bug reported:
running ubuntu karmic alpha from install on USB stick on Acer Aspire One 110L.
uname -a:
Linux usbstick4gb 2.6.30-5-generic #6-Ubuntu SMP Mon May 11 19:56:30 UTC 2009
i686 GNU/Linux
Left- or Right-Clicking anywhere to the right of the icons in the main
toolbar of nautilus c
Public bug reported:
Binary package hint: gnome-power-manager
Clicking on Power History under the gnome-power-manager icon in the
panel, and then clicking on laptop battery extends the window beyond the
right end of the screen (although there is still space on the left) and
extends it bottom end
** Attachment added: "after ckicking on 'Laptop Battery' in 'Power History'"
http://launchpadlibrarian.net/26867638/Screenshot.png
--
[ubuntu karmic]Power History windows too big for netbook screen
https://bugs.launchpad.net/bugs/377576
You received this bug notification because you are a mem
Hi Bryce,
it has become a bit more complicated: after activation of a ppa
repository, the blue screen is fixed on both systems, but a "black
screen" showed up on one of them.
The activated repository - the same on both - is :
http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu jaunty main
The xorg.c
** Attachment added: "lspci output for the aa1 system"
http://launchpadlibrarian.net/26946608/aa1_lspci_-vvnn.txt
--
[ubuntu jaunty] Blue Screen (w. death) on intel-video
https://bugs.launchpad.net/bugs/372575
You received this bug notification because you are a member of Ubuntu
Bugs, which i
** Attachment added: "when the black screen occured"
http://launchpadlibrarian.net/26946642/Xorg.0.log.old
--
[ubuntu jaunty] Blue Screen (w. death) on intel-video
https://bugs.launchpad.net/bugs/372575
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
** Attachment added: "after a reboot, all things working"
http://launchpadlibrarian.net/2694/Xorg.0.log
--
[ubuntu jaunty] Blue Screen (w. death) on intel-video
https://bugs.launchpad.net/bugs/372575
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
I don't understand your question. mythtv is started from the gnome
desktop.
to add: the "p" key does pause and continue any replay (as it should),
but again, there is no on-screen display as found on other installs. You
get no feedback of what keys you have pressed.
--
[jaunty] mythtv frontend n
if so, then it is missing in the default installation and needs
correction
--
[jaunty] mythtv frontend not responding to some keys
https://bugs.launchpad.net/bugs/343241
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
Public bug reported:
USB webcam identified by lsusb as: ID 0733:0401 ViewQuest Technologies,
Inc. CS330 WebCam (bought as an Intel Create and Share webcam model
cs330) does not show any pictures under cheese; the "picture" is a
pinkish background with horizontal green, purple, pink stripes. These
** Attachment added: "picture from webcam taken with Cheese"
http://launchpadlibrarian.net/24189309/2009-03-21-121759.jpg
--
[jaunty] webcam CS330 not working with gspca
https://bugs.launchpad.net/bugs/346370
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Nope. This computer had a fresh install from a jaunty-alpha5 CD, and
everything had been wiped out by the install of jaunty.
--
[jaunty] mythtv frontend not responding to some keys
https://bugs.launchpad.net/bugs/343241
You received this bug notification because you are a member of Ubuntu
Bugs, w
Update:
I used an *Hardy* Kubuntu Live CD on the same computer, and the webcam was
recognized by default. The picture under Cheese was correct with proper colors.
Possibly interesting note: The picture was color correct ONLY as long as the
light was rather dark. As soon as the camera looked into
indeed I am using an existing backend, and several frontends, with back-
and frontends having gone through some changes from feisty to intrepid,
and always worked.
So, what is different with jaunty? Do I need to change settings on the
jaunty frontend? or on the intrepid backend? and if on the latt
201 - 300 of 1115 matches
Mail list logo