paul- wrote:
> That is some good detective work. I think a few I2S dacs use that pin.
> I just looked at IQaudio documentation and pin 12 (Which can be
> GPIO18) is used for I2SClK on the Dac+ and Amp+ Boards.
>
> Question.
>
> Does this work.
> Setup sound for onboad audio
> Install lir
Hi all
If you run into this problem setup Pcp without the Hifiberry DAC
installed, setup everything and then setup lirc (not using a GPIO that
Hifiberrys use)
and then power off and install the DAC
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer
x3,Wandboard
*Server:
Jeff07971 wrote:
> Hi Guys
>
> I think I may have figured out the problem.
>
> I took the sdcard from the "bricked" system and put it in another Rpi
> WITHOUT a HiFiBerry Dac+ and it all booted fine although squeezelite
> wouldn't run (as no DAC+) I then checked the Lirc setting GPIO was still
Jeff07971 wrote:
> Hi Guys
>
> I'm sorry to report that loading LIRC seems to break the latest version
> of Pcp 3.00
>
> Did basic setup :- resized, loaded ffmpeg SL, renamed host and SL all
> worked fine after this then tried to install Lirc.
>
> There was and error downloading lirc.tcz only
Just reinstalled and started up without the USB device attached that had
my previous config on and it all starts and works as it should.
badsoden's Profile: http://forums.slimdevices.com/member.php?userid=62818
View this
Hi together,
I set up my RPI3 up again from scratch with the new v3.00 image and with
squeezelite, shareport, LMS, music share from the NAS via cifs and using
the internal wifi. I use a Hifiberry DAC+ Pro.
During boot up an error message "RPI3B Broadcom Firmware Load Error" is
displayed (see at
Fresh install on a RPi3/HifiBerry Digi+ and all is working OK. No WiFi.
No LMS.
badboygolf16v's Profile: http://forums.slimdevices.com/member.php?userid=19486
View this thread: http://forums.slimdevices.com/showthread.php?t
AngloCuencano wrote:
> I had a similar problem with a fresh install of the new 3.0 and a backed
> up config using Hifiberry Digi.
>
> I think that the old config is not being transferred totally correctly.
> For example, static IP was not transferred. I also noticed under Tweaks
> that Alsa Out
badsoden wrote:
> I did a fresh install of 3.0 as suggested with config backed up to a USB
> stick. I'm using a hifiberry Digi + board. Squeezelite will not start.
>
> Sent from my Nexus 6P using Tapatalk
I had a similar problem with a fresh install of the new 3.0 and a backed
up config using H
I did a fresh install of 3.0 as suggested with config backed up to a USB
stick. I'm using a hifiberry Digi + board. Squeezelite will not start.
Sent from my Nexus 6P using Tapatalk
badsoden's Profile: http://forums.slimd
Jeff07971 wrote:
> Hi Guys
>
> I'm sorry to report that loading LIRC seems to break the latest version
> of Pcp 3.00
>
> Did basic setup :- resized, loaded ffmpeg SL, renamed host and SL all
> worked fine after this then tried to install Lirc.
>
> There was and error downloading lirc.tcz only
hsmeets wrote:
> Okay, same here too, shairport running but not visible to my iPad.
I have updated from 2.06 to 3 with IQaudio; the shairport works!
anadigi's Profile: http://forums.slimdevices.com/member.php?userid=65102
Is it possible to use a dynamic dns address for the LMS IP? I use a
couple remote boxes for streaming at work and would like to be able to
avoid re enetering the ip address when my internet provider changes my
WAN IP. Thanks for providing such a great program.
--
spt58 wrote:
> Hi
>
> Just tried the latest v 3.00 clean install. Activated shairport but it
> still won't show up as a a device to airplay to and I've tried a few
> different iOS devices so I think there may be a bug in v 3.00 and
> shairport.
>
> Thanks
Okay, same here too, shairport running
spt58 wrote:
> Hi
>
> Just tried the latest v 3.00 clean install. Activated shairport but it
> still won't show up as a a device to airplay to and I've tried a few
> different iOS devices so I think there may be a bug in v 3.00 and
> shairport.
>
> Thanks
Thanks, we Will need to reproduce. Ther
steffen wrote:
> Can i use now my WiFi WPA2 key with special characters with version 3?
Not yet, there was no change to the wifi setup.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thre
Hi
Just tried the latest v 3.00 clean install. Activated shairport but it
still won't show up as a a device to airplay to and I've tried a few
different iOS devices so I think there may be a bug in v 3.00 and
shairport.
Thanks
---
Can i use now my WiFi WPA2 key with special characters with version 3?
steffen's Profile: http://forums.slimdevices.com/member.php?userid=27673
View this thread: http://forums.slimdevices.com/showthread.php?t=105997
__
Hi Guys
I'm sorry to report that loading LIRC seems to break the latest version
of Pcp 3.00
Did basic setup :- resized, loaded ffmpeg SL, renamed host and SL all
worked fine after this then tried to install Lirc.
There was and error downloading lirc.tcz only this file I believe
On reboot there
sbp wrote:
> *Please see first post for instructions.
>
> We have released a new pCP3.00.
>
> Sorry, but insitu update is not possible for this version
> (unfortunately).*
I think I know the answer, but just to clarify - Is this a fix for the
Hifiberry problem ?
*Players:* SliMP3,Squeezebox
*Please see first post for instructions.
We have released a new pCP3.00.
Sorry, but insitu update is not possible for this version
(unfortunately).*
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
(https://w
21 matches
Mail list logo
