Hi Team,
I was really stuck up with this issue for really two months. Guys please guide
me what when worng.
Problem :- I have two node setup when I create a instance or migrate machine I
could not get IP address from the VR.
This only happens if my VR and instances are in different node
Hi,
I think we talked a couple of days via IRC. The issue looks like a switch
issue.
But I can remember a long time ago I had really trouble with tagged vlans in
XenServer after an Upgrade to 6.0.2, because citrix skipped support for some
gigabit nics.
If you like I can try to help.
Am
Hi Team,
I was really stuck up with this issue for really two months. Guys please guide
me what when worng.
Problem :- I have two node setup when I create a instance or migrate machine I
could not get IP address from the VR.
This only happens if my VR and instances are in different n
Hi Nick,
I resolved my problem.
The issue was due to NFS v4 domain configuration.
I set correctly the domain on the KVM hosts but I forgot to configure the
domain on the NFS server :
/etc/idmapd.conf
=> Domain = FqdnDomainName
Regards
-Message d'origine-
De : COCHE Sébastien [mailto:sco
I suppose the same goes for esx?
Kirk Jantzer wrote:
At present, I believe what you suggested is the only solution. We're
looking to use XCP instead of XenServer as our hypervisor - XCP allows for
this option, whereas you need at least the advanced license of XenServer to
be able to utilize th
Yes.
Regards,
Kirk Jantzer
http://about.me/kirkjantzer
On May 16, 2013 7:12 AM, "Stanley Kaytovich" wrote:
> I suppose the same goes for esx?
>
> Kirk Jantzer wrote:
>
>
> At present, I believe what you suggested is the only solution. We're
> looking to use XCP instead of XenServer as our hyp
Hi Team,
I was really stuck up with this issue for really two months. Guys please guide
me what when worng.
Problem :- I have two node setup when I create a instance or migrate machine I
could not get IP address from the VR.
This only happens if my VR and instances are in different nod
On Wed, May 15, 2013 at 09:59:59PM +, Musayev, Ilya wrote:
> David,
>
> I would have, but that would be a bit renegade IMHO. I'd need for another
> person (Chiradeep or Rohit) to approve it, since they were the original
> developers who wrote the code and need to agree on the changes.
>
>
Hi,
I need help for one of our windows server 2008 R2 instance which running on
cloudstack 3.0.2+xenserver 6.0.2.
As staring from yesterday, the status for this vm in cloudstack UI displayed as
"stopping", but we knew the VM is still up and running.
Then the vm was down and status changed to "
Attachments like images are stripped from the mailing list. Please post
the image somewhere or provide the error message in text.
On Thu, May 16, 2013 at 07:37:16PM +, William Jiang wrote:
> Hi,
>
> I need help for one of our windows server 2008 R2 instance which running on
> cloudstack 3.0
Thanks for reminding, I will provide error message in text.
Hi,
I need help for one of our windows server 2008 R2 instance which running on
cloudstack 3.0.2+xenserver 6.0.2.
As staring from yesterday, the status for this vm in cloudstack UI displayed as
“stopping”, but we knew the VM is still
Hi all.
It seems that CS always tries to send alert emails via ssl -- if I
configure it to use non-ssl port (25), I get the following exception:
>javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection
However, if I use ssl port(465) with self-signed certificate, I get the
fol
Have you check to make sure there are not any pending operations? Run "xe
task-list" from the XenCenter console or via SSH of the host.
What kind of primary storage are you using?
I would also check the SMlog file(located /var/log/SMlog) on the host.
When these issues occur, it's easier f
Hi Conrad,
Thanks for your response.
1. most time I checked the pending operations by running "xe task-list" from
xenserver console.
I also run some command like "xe vm-list", "xe vm-disk-list", "xe vdi-list" to
make sure the VHD configuration is ok.
2. we use iscsi device as our primary storag
RE: 4. Sorry, I did not complete my thoughts. I assumed that you had a
problem with the storage(I could be wrong).
I take a blank template, attach the VDI and test. That is what I meant by
taking CS out of the picture.
-Original Message-
From: William Jiang [mailto:william.ji...@ma
Hi Conrad,
Thanks for your update.
William
-Original Message-
From: Conrad Geiger [mailto:cgei...@it1solutions.com]
Sent: May-16-13 4:46 PM
To: users@cloudstack.apache.org
Subject: RE: issue about windows server 2008 VM can NOT start
RE: 4. Sorry, I did not complete my thoughts. I as
What OS is the VM (Ubuntu / CentOS/?)
You can login to the virtual router and run tcpdump on eth0 to snoop for
dhcp requests.
You can also look at /var/log/dnsmasq.log inside the virtual router to
debug dhcp issues.
On 5/16/13 6:13 AM, "keerthiraja s. Jegannathan"
wrote:
>
>Hi Team,
>
>
>
>I
I dont see the vlans trunked to the physical switchport the hosts are
connected to.
interface FastEthernet1/0/10
you have the native vlan... but not the guest range, trunk those as well.
Hope that helps.
On Thu, May 16, 2013 at 3:16 PM, Chiradeep Vittal <
chiradeep.vit...@citrix.com> wrote:
>
Hi,
We ran into an issue today with a Windows 2008 template. The template
has been created in another VMWare 5.1 cluster using LSI SAS as the SCSI
controller. We imported that template in CloudStack, and we noticed
that CS deploys the VM using the LSI Parallel controller type instead.
That
On 05/17/2013 03:49 AM, jekie wrote:
Dear All:
I have compiled and installed cloudstack 4.1 snapshot successfully,and i have
found that cloudstack 4.1 use the same kvm sytemvm with cloudstack
4.0.1-incubating,but unfortunately,I cannot find any command like
cloud-install-sys-tmplt to install m
Ove，thank you very much!
At 2013-05-17 09:59:48,"Ove Ewerlid" wrote:
>On 05/17/2013 03:49 AM, jekie wrote:
>> Dear All:
>> I have compiled and installed cloudstack 4.1 snapshot successfully,and i
>> have found that cloudstack 4.1 use the same kvm sytemvm with cloudstack
>> 4.0.1-incubating,but
In a development environment (compiling from source), the script is located
in
{SRC_CODE}/scripts/storage/secondary/cloud-install-sys-tmplt
and you will have to add additional parameters: "-o localhost -r root -d"
at the end to avoid some errors.
For example, after mounting secondary storage at /m
Hi
I have two trouble need help
My CS environment
two management server ,one haproxy , one mysql ,two mysql slave
1. when I start management server ,the managemnet log find the error
2013-05-17 09:45:03,201 ERROR [cloud.cluster.ClusterManagerImpl]
(main:null) Unable to ping manag
ement server
what does the firewall look like on each management server? poke a hole for
tcp port 9090, see if you get further.
On Thu, May 16, 2013 at 7:21 PM, guren san wrote:
> Hi
>
> I have two trouble need help
>
> My CS environment
> two management server ,one haproxy , one mysql ,two mysql slave
>
>
take a look at the global configuration setting, search for the parameter
named: 'vmware.root.disk.controller'
On Thu, May 16, 2013 at 5:06 PM, Francois Gaudreault <
fgaudrea...@cloudops.com> wrote:
> Hi,
>
> We ran into an issue today with a Windows 2008 template. The template has
> been creat
On Thu, May 16, 2013 at 3:29 AM, Musayev, Ilya wrote:
> David,
>
> I would have, but that would be a bit renegade IMHO. I'd need for another
> person (Chiradeep or Rohit) to approve it, since they were the original
> developers who wrote the code and need to agree on the changes.
>
NO! Just comm
I think i answered this in another thread, but :
guest vlan range is not present on the switchport interfaces... i.e.
1/0/10. trunk there, as well as the native vlan and you should be good to
go.
Let us know if this resolves the issue.
On Thu, May 16, 2013 at 1:41 AM, keerthiraja s. Jegannathan <
27 matches
Mail list logo
