benefits if the FPGA DSP could limit the number of samples that
are actually sent to the host, but it is an efficiency gain you likely don't
need.
Regards,
Derek
On Mon, Jul 9, 2018 at 11:01 AM, Tarik Kazaz via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi All,
I am giving u
Hi Nives,
It is not clear for me what is your issue. However, based on what you have
wrote I think you have issue with
Implementing and understanding decimation.
Here is short explanation what is decimation. With decimation of digital signal
you are removing some samples
of your signal in
yway does
probably help physically, too.
Best regards,
Marcus
On Wed, 2018-06-27 at 08:30 +, Tarik Kazaz via USRP-users wrote:
> Hi All,
>
> I did further research on issues related to streaming and storing IQ
> samples from USRP X310 (with UBX-160) sampling at 200Msps to PC.
&
Hi All,
I did further research on issues related to streaming and storing IQ samples
from USRP X310 (with UBX-160) sampling at 200Msps to PC.
The connection between USRP X310 and PC would be over two (2) 10 Gigabit
Ethernet interface.
Based on my calculations writing speed to the memory of
n, it will bypass this warning and
run the flowgraph.
Regards,
Nate Temple
On Mon, Mar 19, 2018 at 8:59 AM, Tarik Kazaz via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
Hi All,
I am using USRP X310 with UBX-160MHz. I tried to run RFN
Hi All,
I am using USRP X310 with UBX-160MHz. I tried to run RFNoC fosphor demo,
however I am getting errors related to connection of RFNoC:Radio to RFNoC: DDC
and to RFNoC:Window (Source IO size "8" does not match sink IO size "8192"). I
found this discussion on mailing list (from 2016)
Hi All,
I am using USRP X310 with UBX-160MHz. I tried to run RFNoC fosphor demo,
however I am getting errors related to connection of RFNoC:Radio to RFNoC: DDC
and to RFNoC:Window (Source IO size "8" does not match sink IO size "8192"). I
found this discussion on mailing list (from 2016)
Hello everyone,
I am considering to synchronize several USRPs Xseries. However, I have only one
device with integrated
GPS disciplined oscillator.
I am wondering whether it is possible to use the device with GPS disciplined
oscillator as a master clock source?
What is the output of REF Out
s on receive, you would need to use both 10 GigE connections.
https://kb.ettus.com/X300/X310#Choosing_a_Host_Interface
Regards,
Derek
On Tue, Jan 30, 2018 at 10:01 AM, Tarik Kazaz via USRP-users
<usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote:
Hello Martin,
I hope I
igE. In order to get the full bandwidth of the X3x0, which
is 2x 200 MS/s on receive, you would need to use both 10 GigE connections.
https://kb.ettus.com/X300/X310#Choosing_a_Host_Interface
Regards,
Derek
On Tue, Jan 30, 2018 at 10:01 AM, Tarik Kazaz via USRP-users
<usrp-users@lists.ettu
rs@lists.ettus.com
> Subject: Re: [USRP-users] NI USRP / PCIe interface and RFNoC FPGA images
>
> On 01/29/2018 07:37 PM, Tarik Kazaz via USRP-users wrote:
>> Hello everyone,
>>
>>
>>
>> I am just starting to use RFNoC and I am a bit confused with hardware
>
Hello everyone,
I am just starting to use RFNoC and I am a bit confused with hardware
compatibility for RFNoC development.
In order to describe my setup I will list items below:
1. I have NI USRP RIO (equivalent of X310 with integrated GPS module)
2. I am connecting it with PC
12 matches
Mail list logo
