Message -
From: J McK
To: Fly Swap
Sent: Thursday, February 11, 2010 4:24 PM
Subject: RE: [VFB] vises
My two cents, is Renzetti Traveler , I also have a sunrise and a Cabela's
Jerry McKaughan,President
Caddis Fly Fishing Club
P. O. Box 9104
Russellville, AR
Thought this was off list.
Tony
--- On Thu, 2/11/10, Anthony Spezio wrote:
From: Anthony Spezio
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 6:28 PM
The invitation is always there. I would like to come over there too but my
health problems Keep me
The invitation is always there. I would like to come over there too but my
health problems Keep me from doing it.
Tony
--- On Thu, 2/11/10, Martin Westbeek wrote:
From: Martin Westbeek
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 6:07 PM
I&#
om
Sent: Thursday, February 11, 2010 3:26 AM
Subject: Re: [VFB] Vises
Thanks Mart,
I will look it up just for the heck of it.
Any chance of you getting back to the Sowbug, it has grown quite a bit
since you were here.
Tony
--- On Wed, 2/10/10, Ma
..@comcast.net
> Subject: [VFB] vises
>
> I love my Peak vise built solid, holds as small as i have tied down
> to a 22, although you can buy a midge jaw for it
> just my 2 cents worth
> Flydipper
>
> --
> You received this message because you are subscribed to the &qu
Rene,
Yes I do remember. We talked about a lot of things the two years you were here.
I hope you can make it back again someday.
Tony
--- On Thu, 2/11/10, Rene Zillmann wrote:
From: Rene Zillmann
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 2:35
"smaller"... in my opinion.
The Barracuda Junior is the same vise as the Standard Barracuda... 6 months
before starting to visit the gym. ;o)
/Nick
-Ursprungligt meddelande-
Från: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] För
Anthony Spezio
Skickat: den 11
I don't know Jack either and that is only half of it.
> Date: Thu, 11 Feb 2010 10:25:25 -0600
> From: jklepo...@sbcglobal.net
> To: vfb-mail@googlegroups.com
> Subject: Re: [VFB] Vises - my 4¢ worth
>
> Actually I think ya'll don't know jack.
> Somethin
t ring a bell.
> Scares me just looking at ti.
> Tony
>
> --- On *Thu, 2/11/10, George Vincent //* wrote:
>
>
> From: George Vincent
> Subject: RE: [VFB] Vises
> To: vfb-mail@googlegroups.com
> Date: Thursday, February 11, 2010, 8:49 AM
>
> T
Well, I don't know Jack Lehman, but I know a couple of others...
-Original Message-
From: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] On Behalf
Of Jack Lehman
Sent: Thursday, February 11, 2010 10:25 AM
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Vises - my 4¢
he will sell the Beatis to me.
Tony
--- On Thu, 2/11/10, George Vincent wrote:
From: George Vincent
Subject: RE: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 11:21 AM
Tony, if you have the chance to get the Orvis Baetis vise, go for it, they
are rare as hens teeth.
I b
...@googlegroups.com] On Behalf
Of Anthony Spezio
Sent: Thursday, February 11, 2010 11:39
To: vfb-mail@googlegroups.com
Subject: RE: [VFB] Vises
Now I remember seeing it, the name did not ring a bell.
Scares me just looking at ti.
Tony
--- On Thu, 2/11/10, George Vincent wrote:
From: George Vincent
Subject
super.
George
From: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] On Behalf
Of Anthony Spezio
Sent: Thursday, February 11, 2010 11:47
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Vises
One of the guys in our tying group offered to trade his Orvis Baetis vise
for my Norlander
Now I remember seeing it, the name did not ring a bell.
Scares me just looking at ti.
Tony
--- On Thu, 2/11/10, George Vincent wrote:
From: George Vincent
Subject: RE: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 8:49 AM
The Vosseler certainly looks like it
s really no big hassle.
Tony
--- On Thu, 2/11/10, Allan Fish wrote:
From: Allan Fish
Subject: Re: [VFB] Vises - my 4¢ worth
To: vfb-mail@googlegroups.com
Date: Thursday, February 11, 2010, 9:44 AM
Re: [VFB] Vises - my 4¢
worthGeorge and Tony,
You guys have got me beat by a long shot!
Actually I think ya'll don't know jack.
Something any simple layman would understand.
Jack Lehman
Allan Fish wrote:
p.s.: MIke said: "Easy on that 'ignorance is bliss' comment. It is
no longer politically correct."
Another one is "There's something fishy about that." I consider that
one to
George and Tony,
You guys have got me beat by a long shot! I've only got four vises.
I've got the Renzetti Traveler. And, unlike Mart, I love it. Most
of the new rotary vises have copied or modified the Renzetti design.
Mart hates the Anvil Apex. I used one for an evening and liked it
exc
I love my Peak vise built solid, holds as small as i have tied down
to a 22, although you can buy a midge jaw for it
just my 2 cents worth
Flydipper
--
You received this message because you are subscribed to the "VFB Mail" group.
To post to this group, send email to vfb-mail@googlegroups.com
Subject: Re: [VFB] Vises
The Vosseler is a great example of the fact that a vise is highly personal.
Some like it; I did not care for at all.
Two pair of jaws... why? No weight in the base, but a suction cup instead,
which just does not work on many surfaces, and results in an extremely
wobbly vise
I think so. LOL
Tony
--- On Wed, 2/10/10, Martin Westbeek wrote:
From: Martin Westbeek
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday, February 10, 2010, 5:47 PM
Yeah, you mentioned that to me back in 2002 at the
Sowbug, Tony.
And you are probably right, too
Too big a job for me to do that. Most are packed away in boxes somewhere in the
room downstairs. Don, I think you have seen that room.
Tony
--- On Wed, 2/10/10, Don Ordes wrote:
From: Don Ordes
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday, February 10, 2010, 11:12 PM
I would like everyone to take photos of all of your vises
and post them here so I can see what you are talking about.
Thanks,
Buggs
- Original Message -
From: Bob Scarbrough
To: vfb-mail@googlegroups.com
Sent: Wednesday, February 10, 2010 2:36 PM
Subject: RE: [VFB] Vises
Thanks Mart,
I will look it up just for the heck of it.
Any chance of you getting back to the Sowbug, it has grown quite a bit since
you were here.
Tony
--- On Wed, 2/10/10, Martin Westbeek wrote:
From: Martin Westbeek
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday
in an circle
instead of a true rotary.
Tony
--- On Wed, 2/10/10, Bob Scarbrough wrote:
From: Bob Scarbrough
Subject: RE: [VFB] Vises
To: "vfb-mail@googlegroups.com"
Date: Wednesday, February 10, 2010, 6:37 PM
Scott,
Is the extension arm necessary? I dont have it on mine, but
My bad. I was blissfully unaware...
On Wed, Feb 10, 2010 at 8:20 PM, Michael Bliss wrote:
> Easy on that "ignorance is bliss" comment. It is no longer politically
> correct.
--
You received this message because you are subscribed to the "VFB Mail" group.
To post to this group, send email to
Easy on that "ignorance is bliss" comment. It is no longer politically
correct.
On Wed, Feb 10, 2010 at 3:14 PM, scott bearden wrote:
> Bob,
>
> No, it isn't necessary. I will say that ignorance is bliss, and if it were
> not invented I would still be happily using what came with the Danvise.
Bob,
No, it isn't necessary. I will say that ignorance is bliss, and if it were
not invented I would still be happily using what came with the Danvise.
Having said that, I think it is a very nice addition, particularly for flies
that have a lot of material that extends behind the hook. It you most
-
> *From:* Anthony Spezio
> *To:* vfb-mail@googlegroups.com
> *Sent:* Thursday, February 11, 2010 12:16 AM
> *Subject:* Re: [VFB] Vises
>
> That is one I have not heard of.
> Tony
>
> --- On *Wed, 2/10/10, Jeff Frye * wrote:
>
>
> From: Jeff Frye
&g
Scott,
Is the extension arm necessary? I dont have it on mine, but of course I have
been tying that much on it til recently.
Bob
From: scott.bear...@gmail.com
Date: Wed, 10 Feb 2010 19:21:12 -0500
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Mart,
Mine is made of
Mart,
Mine is made of aluminum and was one of Al Beatty's prototypes. I had to
wait several weeks for mine. I didn't complain about the vise before the
extension arm came along, but I knew I just had to have one when I heard
about it. It does add quite a bit of swing to the rotation, but I still l
* really sucks ;-)
Mart
- Original Message -
From: Anthony Spezio
To: vfb-mail@googlegroups.com
Sent: Thursday, February 11, 2010 12:16 AM
Subject: Re: [VFB] Vises
That is one I have not heard of.
Tony
--- On Wed, 2/10/10, Jeff Frye wrote
Yeah, you mentioned that to me back in 2002 at the Sowbug, Tony.
And you are probably right, too!
:-)
Mart
- Original Message -
From: Anthony Spezio
To: vfb-mail@googlegroups.com
Sent: Thursday, February 11, 2010 12:24 AM
Subject: Re: [VFB] Vises
I say this with
o the weight outside
the axis of rotation, making no difference to the balance when rotating.
/Nick
-Ursprungligt meddelande-
Från: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] För scott
bearden
Skickat: den 11 februari 2010 00:25
Till: vfb-mail@googlegroups.com
Ämne: Re
ooglegroups.com
Ämne: Re: [VFB] Vises
Hi Bob,
What Mike said - try before you buy. That's what I did before I bought my
new vise 10 years or so ago.
But then, if you have a Danvise and like it, why change?
I think that the Danvise is an outstanding vise, especially
010 23:43
>
> *Till:* vfb-mail@googlegroups.com
> *Ämne:* Re: [VFB] Vises
>
> Hi Bob,
>
> What Mike said - try before you buy. That's what I did before I bought my
> new vise 10 years or so ago.
>
> But then, if you have a Danvise and like it, why change?
> I thin
2/10/10, Martin Westbeek wrote:
From: Martin Westbeek
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday, February 10, 2010, 4:43 PM
#yiv574615832 .hmmessage P {
PADDING-BOTTOM:0px;MARGIN:0px;PADDING-LEFT:0px;PADDING-RIGHT:0px;PADDING-TOP:0px;}
#yiv574615832 {
That is one I have not heard of.
Tony
--- On Wed, 2/10/10, Jeff Frye wrote:
From: Jeff Frye
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday, February 10, 2010, 5:05 PM
Check out the Vosseler. There is no jaw like it. The base is such that you will
pick up the desk
Check out the Vosseler. There is no jaw like it. The base is such that you will
pick up the desk before the vise breaks free of the desk.
From: Bob Scarbrough
To: "vfb-mail@googlegroups.com"
Sent: Wed, February 10, 2010 3:36:51 PM
Subject: RE: [
acuda (Junior) or a Peak, and my present one of course -
the LAW bench vise.
This is a matter of personal preference though.
:-)
Mart
- Original Message -
From: Bob Scarbrough
To: vfb-mail@googlegroups.com
Sent: Wednesday, February 10, 2010 9:30 PM
Subject: [VFB] Vises
I
the jaws on my Regal and
they replaced them at no cost..
--- On Wed, 2/10/10, Bob Scarbrough wrote:
From: Bob Scarbrough
Subject: [VFB] Vises
To: "vfb-mail@googlegroups.com"
Date: Wednesday, February 10, 2010, 2:30 PM
I have a general question about vises. Whats the differences b
I
said, I know many who love theirs.
/Nick
-Ursprungligt meddelande-
Från: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] För Bob
Scarbrough
Skickat: den 10 februari 2010 22:37
Till: vfb-mail@googlegroups.com
Ämne: RE: [VFB] Vises
You guys arent much help! :)
Just
---
Från: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] För Bob
Scarbrough
Skickat: den 10 februari 2010 21:39
Till: vfb-mail@googlegroups.com
Ämne: [VFB] Vises
Dont know if the previous message went through.
I have a question about vises, whats a good one and whats not? Why should I
pay $
37 PM
To: vfb-mail@googlegroups.com
Subject: RE: [VFB] Vises
You guys arent much help! :)
Just kidding, I have been looking at the Nor Vise or the Mongoose.
Bob
_
Date: Wed, 10 Feb 2010 13:30:07 -0800
From: bambot...@yahoo.com
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.co
You guys arent much help! :)
Just kidding, I have been looking at the Nor Vise or the Mongoose.
Bob
Date: Wed, 10 Feb 2010 13:30:07 -0800
From: bambot...@yahoo.com
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Bob,
I go along with Mike on this. I have about 20 vises, I
ed, 2/10/10, Michael Bliss wrote:
From: Michael Bliss
Subject: Re: [VFB] Vises
To: vfb-mail@googlegroups.com
Date: Wednesday, February 10, 2010, 2:41 PM
Boy, Bob this is really a personal preference type of thing. I started on a
Thompson A vise, then to a Renzetti Traveler and then a Regal.
Mike,
I figured it would get people going.
Problem I have is not a lot of places around here have the actual vices to try,
they tell me they can order one, but I dont want to do that without trying it
this time.
Bob
Date: Wed, 10 Feb 2010 10:41:04 -1000
Subject: Re: [VFB
Boy, Bob this is really a personal preference type of thing. I started on a
Thompson A vise, then to a Renzetti Traveler and then a Regal. A few years
ago I bought a NorVise. I have tied on a few others. Each seems to have
its particular strength and weakness. If you enjoy your vise, don't
cha
Dont know if the previous message went through.
I have a question about vises, whats a good one and whats not? Why should I
pay $700 for a vise when a $80 will work? I have a Danvise and am happy with
it, but its the only one I own so I dont know the difference.
Bob Scarbrough
I have a general question about vises. Whats the differences between the lower
priced (100 and below) and the higher priced models? I am thinking of
upgrading but dont know if I need to, I have a Danvise and like it, course its
the only one Ive owned so I dont know any different.
Bob Scar
49 matches
Mail list logo
