Re: [weewx-user] Non supported weather station

Indeed, quite a silly request ;-) Thanks a lot for your patience, it really helped! I got a few steps closer, and getting excited now!! Regards. Ivan >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

Re: [weewx-user] Non supported weather station

See Understanding paths in the Wiki. On Mon, Nov 9, 2020 at 8:45 AM ivan.sc...@gmail.com < ivan.schroo...@gmail.com> wrote: > Hello, > > Indeed, I would prefer the interceptor plugin in order to access all data > (including pressure). > I

Re: [weewx-user] Non supported weather station

Hello, Indeed, I would prefer the interceptor plugin in order to access all data (including pressure). I have finally (after significant efforts) installed Weewx directly on my Synology NAS. I have not tested it much yet, but I have the impression it runs. Now, I am trying to install the Weewx

Re: [weewx-user] Non supported weather station

To add to Gary's post on using an SDR solution I know that the Bresser 6 in 1 is supported by the rtl_433 software, and I'm pretty sure that the Bresser 5 in 1 using the 868MHz frequency is compatible. However the software for these may not yet be in the main branch - but is available. See

Re: [weewx-user] Non supported weather station

Another approach is to use the interceptor driver . It intercepts posts to the WU and, instead, runs them through WeeWX. On Fri, Nov 6, 2020 at 7:14 AM wes...@gmail.com wrote: > a simple google search shows that many people have decoded the

Re: [weewx-user] Non supported weather station

a simple google search shows that many people have decoded the 433MHZ signal from this weather station. would be a simple matter to build a received with some code to decode the signal. once you do that adding the data to weewx is trivial. https://github.com/giulio93/Backeng_433mhz_Arduino

Re: [weewx-user] Non supported weather station

Hello, Sorry to be back on this post... In the last couple of months, I have tried a couple of things based on Wunderground, and it's indeed not reliable for continuous usage. So, I am back to the original idea, which is to: 1) install weewx on a raspberry pi and intercept the packages sent to

Re: [weewx-user] Non supported weather station

Do a search of the group for more info, also check the following links: https://github.com/weewx/weewx/wiki/sdr-rpi-recipe https://github.com/matthewwall/weewx-sdr Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from

Re: [weewx-user] Non supported weather station

On Wednesday, February 19, 2020 at 9:47:08 AM UTC-5, Thomas Keffer wrote: > Which Bresser model? Some are Fine Offset clones.  No Bresser station model is a Fine Offset clone. These are two separate manufacturers, they are not resellers. Resellers like Ambient and Froggit sell both Fine Offset

Re: [weewx-user] Non supported weather station

Hello Gary, Thanks for your answer! I am still looking for a good option to get the data on my NAS. I am not sure I understand what you say about RTL_433 and RTL_SDR, could you please explain with a bit more details? Is it possible to catch the flux of data with simple python programming or

Re: [weewx-user] Non supported weather station

The Bresser 5in1 Weather Centre is now supported by RTL_433 so another option is to try RTL-SDR. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Non supported weather station

Interceptor perhaps so that weewx intercepts the data on its way from the station to wunderground . On Thursday, 20 February 2020 14:00:26 UTC+2, Ivan Schrooyen wrote: > > Hello Andrew, > > Is there a cleaner way to get my data out of my weather station then? > I am open to any

Re: [weewx-user] Non supported weather station

Hello Andrew, Is there a cleaner way to get my data out of my weather station then? I am open to any suggestions... Ivan *Ivan Schrooyen* *M: **+33 6 98 38 72 56* *M: **+47 950 41 710* *E**: **ivan.schroo...@gmail.com * *A: 8 Sakkastadvika**, 5538 Haugesund, Norway* Le jeu. 20 févr. 2020 à

Re: [weewx-user] Non supported weather station

I doubt if you will find wunderground to be reliable if you try and access it to get your data every 60 seconds Wunderground is just not designed for such usage. On Thursday, 20 February 2020 10:43:05 UTC+2, Ivan Schrooyen wrote: > > Hello Thomas, > > Thanks for your answer. > The

Re: [weewx-user] Non supported weather station

Hello Thomas, Thanks for your answer. The model that I have is the following. I did not see any possibility to export the data to something else than wunderground. https://www.bresser.de/fr/Temps/BRESSER-Station-meteo-couleur-WIFI-avec-capteur-exterieur-5-en-1.html Please let me know if I am

Re: [weewx-user] Non supported weather station

Which Bresser model? Some are Fine Offset clones. It is possible to "import" data from the Weather Underground, but it is a single-time, batch process, not intended for continuous use. -tk On Wed, Feb 19, 2020 at 5:51 AM Ivan Schrooyen wrote: > Hello, > I would like to use Weewx to process

[weewx-user] Non supported weather station

Hello, I would like to use Weewx to process the waeather data from my personal weather station. This station (Bresser) is not supported by Weewx, but the data is transferred to Wunderground (table). So, I am wondering whether it is possible to get the data from there, process it and send it to