Re: [weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Ondrej, All good then, I just need to work out why the Python2 install didn't work (possibly because you had added the Python3 dependencies not the Python2 ones ? If so that would make sense) The rest of weewx is much more reliable than my driver !! I have been using mariaDB from day 1 and

Re: [weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, I must admit that I was not thinking about the issue with upper case of the driver name this way. Yes, the problem was in the /etc/weewx/weewx.conf file. The name of the station and the driver section label were written with lower case. And - yes I did insert these manually. The reason

Re: [weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Ondrej, Really pleased you have everything working. The WS6in1 driver should be compatible with Python2 and 3 - though I strongly recommend 3. I'm using Python3 and it could be I've inadvertently introduced a Python3 feature that I shouldn't have, I'll check. I don't understand why you

Re: [weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, Thanks for sending me your advice. I checked the syslog and found a couple of problems. The main problem was that my raspberry pi had two versions of python installed - python 2 and python 3. This in conjunction of parameter WEEWX_PYTHON=python2 in the weewx.conf file located in

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Ondrej I don't understand the behaviour you are seeing and I need a bit more information. Are you trying to run with the weewx Simulator and the WS6in1 at the same time ? You should only be using WS6in1. The results you are seeing cannot be conversion errors they are something completely

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hello Bob, First af all, thanks for the WS6in1 driver! You have done great job. I can see how you helped to Jarda and Pave. Maybe you can give me some advise to my problem. I am having some difficulty to get proper values of my Garni 935PC out to the html output. I use Raspberry Pi 4, it is

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Jarda, Pavel, I'm extremely happy that the updated driver is working ... I might even buy myself an extra sensor at some point ! I do know how to download the data history stored on the console, but I haven't explored how to use this. I think weewx can use this to fill in missing data in

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, ahoj Pavle Thanks again for the help. It's already okay with the data for me too(viz my attached file csv). I wanted to ask you if you haven't solved the possibility of downloading data directly from the weather station, similar to Weathertool Thanks a lot and have a nice day Jarda Dne

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, I have just checked the second external sensor I have, it is posted as ch7 with both values, please see the csv file attached. Thanks again for all your effort, it is great to have all the sensors there. Have a nice day. Pavel Dne středa 6. května 2020 13:40:16 UTC+2 Pavel Pavlik

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, ahoj Pavle Once again I checked setting weewx with wee_config --list-drivers and I really had the original version 0.1 drivers. After a new installation and check, everything is fine, version 0.2 also reads the external sensor on channel 1. There is a link to the functional output

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Ahoj Jardo, There should be 7 columns, not just the three you mentioned. Can you see the values of ch1 on the display of the station? If so, the problem could be in the wrong version of the driver. In that case you should try reinstalling the driver. Good luck. Pavel Dne středa 6. května

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Ahoj Pavle I also browsed the database, (DB Browser for SQLite) there are extraTemp1,2,3 items but they are null. These are missing in the csv file. Jarda Dne středa 6. května 2020 20:26:24 UTC+2 Pavel Pavlik napsal(a): > > Ahoj Jardo, > > Sure, firstly I tried to read the db there some way but

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob I was looking into the syslog, but I didn't see the sensor data. I have a functional sensor on the console on channel 1. I installed version 0.2 of the driver, but I don't have raspbery pi, but the system runs on Ubuntu 18.04 Dne středa 6. května 2020 19:52:52 UTC+2 Bob Atchley

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Ahoj Jardo, Sure, firstly I tried to read the db there some way but unfortunately I was not able to make it properly so I used the plugin to dump it to csv file. I suppose you did the same, it is really easy to install. So the question is: does your csv file have the columns named ExtraTempX

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Jarda, Pavel seems to think it might be working, so I'll wait until he finishes testing before I look further but a few questions for you: If you look in the /var/log/syslog file on your raspberry pi are the extra sensor data set to None or do they have values ? Do you see the extra sensor

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Ahoj Pavle, hi Bob Pavle thanks for the tip on csv. But even though I have a sensor connected on channel 1, but I don't see it in the protocol. Jarda Dne středa 6. května 2020 13:40:16 UTC+2 Pavel Pavlik napsal(a): > > Hi Bob, ahoj Jardo, > > I am apologize for the delay with the testing

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, ahoj Jardo, I am apologize for the delay with the testing promised, had to go out for business, have tested the driver just partially. I managed to connect just one of the external sensors I have and now I can see its output in csv file (https://github.com/weewx/weewx/wiki/csv), both

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob Thanks for the reply. I checked weewx.sdb and I think there is no data from the external sensor. Only inTemp, outTemp have values, extraTemp1,2,3 have null. thank you Jarda Dne neděle 3. května 2020 19:51:43 UTC+2 Bob Atchley napsal(a): > > > Hi Jarda, > > Very glad the WS6in1 driver is

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Jarda, Very glad the WS6in1 driver is working for you. I don't have the extra sensors so have been unable to test them. Can you confirm that the correct values are being written to the database for humidity and temperature for your 2 extra sensors. I don't use the Neowx skin (I'm just

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob Very thank you for your new driver for the Garni 935 PC weather station. I am using two sensors and please help me how to set the display of both sensors. I use WeeWX with the Neowx skin. thank you Jarda Dne pondělí 27. dubna 2020 21:54:36 UTC+2 Bob Atchley napsal(a): > > > Hi Pavel, > >

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, Thanks a lot for the good news :-) I will test it with the extra sensors and let you know. I have two sensors, the sensors can be set as ch1-7 by an internal switch so I can test all the channels, one by one. Have a nice day. Pavel Dne pondělí 27. dubna 2020 21:54:36 UTC+2 Bob

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Pavel, The 0.2 release of the WS6in1 driver is now available. As stated I don't have an additional sensor to test the decode of the extra sensors, so please let me know how you get on Good luck Bob -- You received this message because you are subscribed to the Google Groups "weewx-user"

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Pavel, Quite good timing, I have a new version of the WS6in1 driver working on my system. I want to let it run for 24 hours or so on my system to make sure it is stable before I release it I will write a changelog but basically the changes are: 1) setTime implemented. This is run from

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, How are you? I would like to ask you if you have any news for me. Thanks a lot & have a nice day. Pavel Dne pondělí 13. dubna 2020 22:31:05 UTC+2 Bob Atchley napsal(a): > > Hi Pavel, > > I have written a setTime function (not yet tested). I then looked in the > weewx engine to see

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, Thanks for your reply. I would say it would be great to send there the computer time every midnight. This would avoid both the timezone and the "minute" problem, also the time difference between the displayed time and computer time would be marginal, it is just 24hrs., the internal

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Pavel, I have written a setTime function (not yet tested). I then looked in the weewx engine to see how this is invoked ... and we have a problem. The engine calls the getTime function first, so that also needs writing. I know how to write this but unfortunately the ws6in1 protocol only

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Pavel, I'm glad the WS6in1 driver is working for you. I know how to add the extra sensor outputs - but I don't have any extra sensors so can't test it. I will make the changes and let you know when its complete, but I will have to rely on you testing that the correct values are

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, Thanks a lot for the driver. I have the same weather station connected to rasbperry and it works well. Just missing two things, automatic time adjustment of the display clock and the extra sensors outputs (ch1 - ch7) - if these were there in the weewx output, this station could be used

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, finally I have tried to connect the Weewx with your driver on RPI zero to the Weathercloud and it works!! :-) Honestly in the very beginning (in January) I was really on doubts if I will ever be able to make it work. And now it works. But without your help I would not succed. My

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir, Really please its working. And yes it should be as simple as updating the weewx.conf file, the ws6in1 driver simply provides the interface between weewx and the weather station, it should not interfere with sending data to Wundercloud etc, though I have not tried this yet Bob

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, apologize for such late reply, but I wanted to start from scratch, so I am completely sure that none of the steps I did in the past has a negative influence on the resultsand luckily it was a good ideait works...The log shows the connection message for the station and it also

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir, We can do this ... I don't have any experience with a rpi zero, but I'm assuming you access it via ssh like my rpi2. I use mysql for the database, but if you are using the default sqlite database it should be here /home/weewx/archive/weewx.sdb or here /var/lib/weewx/weewx.sdb

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, thanks a lot for help, unfortunatelly this seems to become more and more above my skills...I opened the log file after starting the weewx, I can see there that the USB device was connected, but that is all..no further activity as far as I see. But as mentioned, the only logs I work

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir Ok some progress. Before looking at uploading to weathercloud (for which I''m afraid I have no knowledge to help you, but others hopefully can) we need to establish whether the ws6in1 driver is doing its job. When you start weewx can you take a look at the syslog file

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, thank you for good advice, it was really because of the missing "sudo" order (I did not spot any problems there, when runnning it without it, but it must be there). Now I have all installed, I have connected the module, but unfortunatelly still something seem to be missing as I do not

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir OK I'm not sure what is wrong. I initially tested this on a raspberry pi and have just repeated my install instructions on a laptop (xubuntu 18.04) with a weewx 3.9.2 installation. For step 4 the "Installed drivers include:" has WS6in1 as the 0th item (i.e. first in the list).

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, thanks a lot for the driver and for the detailed manual and apologize for late reply. I tried to install it and everything was ok till the step 4: 4) configure the driver wee_config --reconfigure There I should choose the driver again, but ws6in1 is not on the menu there, did I

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Dne neděle 15. března 2020 17:40:19 UTC+1 Bob Atchley napsal(a): > > Hi Vladimir, > > I have uploaded the new driver for the 6 in 1 weather stations with PC > connected consoles: > > Youshiko YC9388 > > Bresser PC 6 in 1 > > Garni 935PC > > Ventus W835 > > If you go to the weewx wiki

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Dne neděle 15. března 2020 17:40:19 UTC+1 Bob Atchley napsal(a): > > Hi Vladimir, > > I have uploaded the new driver for the 6 in 1 weather stations with PC > connected consoles: > > Youshiko YC9388 > > Bresser PC 6 in 1 > > Garni 935PC > > Ventus W835 > > If you go to the weewx wiki

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir, I have uploaded the new driver for the 6 in 1 weather stations with PC connected consoles: Youshiko YC9388 Bresser PC 6 in 1 Garni 935PC Ventus W835 If you go to the weewx wiki and search for the ws6in1 driver and follow the link hopefully

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Bob, thanks a lot for your message. I also did check based on your info and those devices really look to be minimally very similar :-). I am unfortunatelly usually the WIN user, so this is the second time I tried to tackle something via Linux based OS/programm. Thus bit afraid I cannot help

[weewx-user] Re: Weather station GARNI 935PC - compatibility with Weewx?

Hi Vladimir, Looking at the Garni 935PC image it looks to be identical to the Youshiko YC9388 which I have (and also the Bresser 6 in 1 and probably others as well) If that is the case then sadly it is not compatible ... yet. I have managed to reverse engineer the USB connection and have a test