Use DHCP with radius auth and attributes to set your shaping queues, etc...
Eric
On Jul 13, 2011 6:00 PM, "Josh Bowsher" wrote:
> Yes that's exactly what I am after.
>
> Joshua S. Bowsher
> Director of Internet Services
> Midwaynet.net
> Midway Electronics
> NWIIS a division of MidwayNet, LLC
> 1
76) 237-3890 (cell)
>
> tset...@thewiredroad.net
>
>
>
>
>
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ------
Since your dishes are older most likely the dual polarity horn will not fit
without cutting out a notch for the other N connector to fit thru the hole.
Newer pac dishes have this notch already there. We've had to do this on
quite a few upgrades this summer.
Eric
On Sep 17, 2010 3:37 PM, "Chris Go
.273.4143
>
Still no dice. Moving the center frequency on the peer to 5752 didn't
improve the modulation at all. :(
Oh well, it's a three day week. Thanks for everyone's input!!! Have a
good hopefully non-labor day weekend!
--
===
SA
picked is the best. :/
--
=
Eric Merkel
ejmerkel.li...@gmail.com
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wi
ed up switching it 15Mhz channel and let it run for a couple
hours. Unfortunately, I lost 13M aggregate throughput on the smaller
channel so I went back to 30Mhz to regain the lost bandwidth.
--
=
Eric Merkel
t wait
long enough for the spectrum analyzer to find the best channel. I
think I'd better wait till off hours to try this again.
--
=
Eric Merkel
ejmerkel.li...@gmail.com
WISPA Wants You! Join
reless Broadband Corp.
> 787.273.4143
>
Do you know if the channel size needs to be set on both sides or just
on the master before I knock down the link? I can't find this in the
docs.
--
=
Eric
would really be helpful.
>
> Marco
We're using 3ft PAC Wireless antenna's. I think they are 31dB.
--
=
Eric Merkel
ejmerkel.li...@gmail.com
WISPA Wants You! Join
ng with your stream.
>
> -B-
The antenna's are dual polarity so that is not an option unless I just
swap the transmit and receive cables. The RSL is the same on both
ends.
--
=
Eric Merkel
ejmerkel.li...@gmail.com
issue? Any tips would be appreciated.
Thanks.
--
=
Eric Merkel
ejmerkel.li...@gmail.com
WISPA Wants You! Join today!
http://signup.wispa.org/
---
Woops hit send before I was done. We've had good luck with mt 4.10. Waiting
for version 5 non-beta before ugrading but 5 looks promising.
Eric
On Jul 31, 2010 9:30 AM, "Eric Merkel" wrote:
We've had great success with mt running
>
>
> >
> > On Jul 3
We've had great success with mt running
>
> On Jul 30, 2010 1:08 PM, "Steve Barnes" wrote:
>
> Fred have you made a good...
>
>
> Steve Barnes
> RC-WiFi Wireless Internet Service
>
>
> -Original Message-
From: wireless-boun...@...
>
> Sent: Friday, July 30, 2010 12:43 PM
> To: WISPA G
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives:
Sounds like a good job for ACORN. They've done very well at finding
volunteers for election fraud and such. ;)
===
Eric Merkel
ejmerkel.li...@gmail.com
> On Thu, Jul 9, 2009 at 2:19 PM, Israel
> Lopez-LISTS wrote:
>> Did you guys hear about this?
>> http://www.networkwor
To resolve this issue, most webmails have the ability to limit how many
emails are sent within a certain period of time or use captcha to make it a
PITA to send out mass spams.
-Eric
- Original Message -
From: "David E. Smith"
To: "WISPA General List"
Sent: 2009-01-08 16:31
Subject: R
I don't know about dark fiber, but I know time warner has a very good fiber
network (metro ethernet) throughout most rural parts of Ohio. You also have
some of the smaller independent telco's but they usually only cover a
smaller geographic area.
-Eric
- Original Message -
From: "Mike
We use the barracuda's and are gennerrally happy with the performance .
We're running 500K plus thru a pair of 400's. We have had performance issues
at times but if you pay for their instant replacement they'll swap out your
hardware. What I find somewhat bogus is the 400 they sold us a couple y
We have 100's of AP's out there with the BG only card with any issues I know of.
-Eric
On Tue, May 27, 2008 at 5:29 PM, Mark Nash <[EMAIL PROTECTED]> wrote:
> That's the one we're having problems with. Not the others from the WLM
> series.
>
> Mark Nash
> UnwiredWest
> 78 Centennial Loop
> Suite
On Fri, May 16, 2008 at 11:49 AM, Eric Merkel <[EMAIL PROTECTED]> wrote:
> Does Mikrotik have the "dead gateway" feature? Basically it pings the
> gateway on the interface and if it fails only uses the remaining
> interface for new sessions? I am not looking for a sol
Does Mikrotik have the "dead gateway" feature? Basically it pings the
gateway on the interface and if it fails only uses the remaining
interface for new sessions? I am not looking for a solution that uses
dynamic routing protocols such as BGP or OSPF. I am looking for
something more geared to the s
Anyone have any recommendations on a dual wan router? We plan to setup
a customer on DSL and wireless and use the wireless for terminating
VPN traffic and DSL for internet traffic and then failover for
redundancy.
I've been investigating this Netgear unit.
http://www.newegg.com/Product/Product.asp
Have your CLEC call them and make sure it is not just a routing issue
or problem in their phone switch. We've run into this quite a bit with
rural telco's in our area. If they are truly blocking calls to your
numbers, complain to your state's public utility comission ASAP!
-Eric
On Thu, Apr 10, 2
Cool thanks. It looks like it does have a php verision so I will try it out.
-Eric
On Tue, Apr 1, 2008 at 4:57 PM, Butch Evans <[EMAIL PROTECTED]> wrote:
>
> On Tue, 1 Apr 2008, Eric Merkel wrote:
>
> >Does anyone know of a good free/opensource php-based speed test? I
>
Does anyone know of a good free/opensource php-based speed test? I
would like something graphical which shows both upload and download
speeds.
Thanks,
Eric
WISPA Wants You! Join today!
http://signup.wispa.org/
-
We've used both PacWireless and Wincomm for a number of years.
PacWireless seems to perform better for us even compared to MaxRad and
MTI especially considering the price.
-Eric
On Thu, Feb 28, 2008 at 10:15 AM, Mike Hammett <[EMAIL PROTECTED]> wrote:
> I was looking at the 2.4 GHz ones. MTI is
We have several tower climbers on staff and do almost all of our own
tower work. We're trying to figure out what the correct pay scale for
them is. I would say 95% of the time these guys are working out in the
field doing customer surveys, installs or service calls. The other 5%
of the time they wo
On 2/12/07, John Scrivner <[EMAIL PROTECTED]> wrote:
Kris Twomey has told me he can do this and that it will meet the
requirements for filing. It is not a terribly difficult thing to do but
it is just easy to use an attorney for anything like this. I do not
bother trying to meet every legal filin
On 2/12/07, John Scrivner <[EMAIL PROTECTED]> wrote:
If you are a paid WISPA Principal Member then you do not have to worry
about filing your CALEA Form 445. Kris Twomey is handling it for all
paid WISPA Principal Members who want it done for them. They are
allowing later filing now. Kris will be
I actually posted the same question on the isp-wireless list this
morning. This is what some kind person sent back.
https://secure.microplastics.com/detail.asp?part=pcbsupportonadhbase&fam=cbhardware&pg=1
https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware&pg=1
-E
You can do all this with DHCP at least with ISC's version of DHCPD. I
won't go into all the gory details but you but you can use clases to
put different mac's into different groups of IP ranges etc.
For example we set all of our CB3's to DHCP and based on their MAC
address we throw them into a pr
On 10/27/06, Rich Comroe <[EMAIL PROTECTED]> wrote:
>We look at the traffic on the
>tower for abuse and/or virus and don't really find anything.
Just to be clear, you've checked your AP broadcast levels during the events
and not found found them elevated? We found the most crippling network
eve
On 10/27/06, David E. Smith <[EMAIL PROTECTED]> wrote:
Jack Unger wrote:
> If it's true that there's a giant "something" that's spewing noise, you
> can use a spectrum analyzer and try to identify the noise "signature",
> then triangulate.
If it would just stay broken for a couple hours, I'd lov
On 8/14/06, Lonnie Nunweiler <[EMAIL PROTECTED]> wrote:
Tom,
We are currently working on a custom MTU size interface for every
device to be able to handle whatever you want for MTU size.
We no longer include proxy arp support in V3. It was fine for the
customer end but too many people misused
We had a storm go thru yesterday and I have a Tsunami MP.11 5054-R
that is now having a problem. The unit powers up and is accessible
from the wireless on the other side without any issue. Unforutnately
though, the ethernet on the unit will not maintain a link to the
router below. The ethernet lin
On 6/16/06, Blair Davis <[EMAIL PROTECTED]> wrote:
A few weeks ago, I ran across a 2.4GHz 500mW amp that was a small
cylinder with an n-male on one end and an n-female on the other.
Slightly larger than the n-connecters and about 4-5 inches long
But I seem to have lost the link to it.
A
Is there a place to get a list of currently allocated IP space by
country? I am considering doing something similar but will probably
not do an all out block but maybe do some connection rate limiting of
IP space from those countries.
-Eric
On 3/6/06, David E. Smith <[EMAIL PROTECTED]> wrote:
> M
37 matches
Mail list logo