Re: [WiX-users] ExecSecureObjects action need very long time

Hi, I'm one step further. The action setAccessRights is not involved - I had removed it for my tests. So I just found A colleague has introduced the PermissionEx util :-) Is there a way to exclude some special subfolders? Thanks, Thomas

Re: [WiX-users] ExecSecureObjects action need very long time

I just added a false condition to my setAccessRights action so the action was skipped., but still the ExecSecureObjects action does took much longer with many files in my ProgramData folder. :-( How can I control ExecSecureObjects? Thanks, Thomas Von:thomas.deboben@rohde

Re: [WiX-users] ExecSecureObjects action need very long time

to false in the way I don't change ACLs a second time would this prevent ExecSecureObjects checking my folder? Thanks, Thomas Von:Rob Mensching An: General discussion about the WiX toolset. , Datum: 02.07.2015 11:36 Betreff:Re: [WiX-users] ExecSecureObjects action

Re: [WiX-users] ExecSecureObjects action need very long time

Hi Rob, on one system yes 1.3 million files so the installer run 40 min. After removing these files the installer performed fine again. On the other system where I added the trace infos onle 215 files with 55MB. Cheers, Thomas Von:Rob Mensching An: General discussion about the

Re: [WiX-users] ExecSecureObjects action need very long time

Hi, no one there who could give me a hint? Best regards, Thomas -Original Message- [WiX-users] ExecSecureObjects action need very long time From: Thomas.D - 2015-06-17 12:26:11 Hi all, I'm having a time problem with my installer. On some systems (not all) the installer need

[WiX-users] ExecSecureObjects action need very long time

sterUser How can I figure out what is causing this delay? Best regards, Thomas -- ___ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.n

Re: [WiX-users] Question regarding Burn and prerequisites (WiX 3.8)

Oh, okay, so if I do not wish to use the RemotePayload (due to the Hash requirements) I just need the prereqs for building? Med venlig hilsen / Best regards, Thomas Due  - Software Developer Tel: +45 8678 5500 Fax: +45 8678 5210 Johann Gutenbergs vej 5-9, Aarhus N, Denmark t...@scanvaegt.dk

[WiX-users] Question regarding Burn and prerequisites (WiX 3.8)

don't have. Med venlig hilsen / Best regards, Thomas Due  - Software Developer Tel: +45 8678 5500 Fax: +45 8678 5210 Johann Gutenbergs vej 5-9, Aarhus N, Denmark t...@scanvaegt.dk | www.scanvaegt.dk This e-mail and its attachments are intended for the named addressee only and may cont

[WiX-users] Wrap WebDeploy in WIX

executing msdeploy and pointing to the .zip or something similar? Best Regards, Dr Danny Thomas, Software Engineer __ This email has been scanned by the Symantec Email Security.cloud service. For more information

[WiX-users] Wrap WebDeploy in WIX

executing msdeploy and pointing to the .zip or something similar? Best Regards, Dr Danny Thomas, Software Engineer __ This email has been scanned by the Symantec Email Security.cloud service. For more information

[WiX-users] Wix Uninstallation in Windows XP

Hi All, We are using Wix MSI for doing installation/uninstallation of our application. Currently our application is supported from Windows XP and above. As a part of uninstallation, we are removing Gui application from system tray.  But we are finding two different behavior for XP vs Non XPS   Non

[WiX-users] Installation context issues when directory structure is defined in library project

n ProductInstaller project, referencing the ProductInstallerLibrary project): http://schemas.microsoft.com/wix/2006/wi";> Development environment: Visual Studio 2010, WiX 3.7. Thomas Magle Brodersen SHARECON A/S E-mail: t...@sharec

[WiX-users] Installation context issues when directory structure is defined in library project

n ProductInstaller project, referencing the ProductInstallerLibrary project): http://schemas.microsoft.com/wix/2006/wi";> Development environment: Visual Studio 2010, WiX 3.7. Thomas Magl

[WiX-users] Installation context issues when directory structure is defined in library project

n ProductInstaller project, referencing the ProductInstallerLibrary project): http://schemas.microsoft.com/wix/2006/wi";> Development environment: Visual Studio 2010, WiX 3.7. Med venlig hilsen Thomas Magle Brodersen SHARECON A/S E-mail: t...@sharec

Re: [WiX-users] EventManifest - broken or wrong usage?

Ok, so how do I do that? As in - the lines from the log (that show wevtutil calls) all show only the IM and one path - not any other parameters. So, I am totally at a loss now how to verify that. Regards Thomas -Original Message- From: Georg von Kries [mailto:g...@creativbox.net

Re: [WiX-users] EventManifest - broken or wrong usage?

not. And, as I said, the command line in the logs does not show /rf and /mf. Regards Thomas -Original Message- From: Georg von Kries [mailto:g...@creativbox.net] Sent: 03 February 2014 22:29 To: 'General discussion about the WiX toolset.' Subject: Re: [WiX-users] EventManifest -

[WiX-users] EventManifest - broken or wrong usage?

is an error in my EventManifest declaration - the alternative would be a bug. Now, before I am retiring towards just calling wevtutil manually in a custom action. do I have something wrong in the WIX code? Regards Thomas

Re: [WiX-users] Event Source Manifests and Wix .... is there a good example?

x27;t have all the WiX helper libraries (yet) so that made creating the custom actions for IIS, SQL, and FileShare (and others) even more challenging. At least you can get a head start on that process. -Original Message----- From: Thomas Tomiczek [mailto:t.tomic...@nettecture.com] Sent: Fri

Re: [WiX-users] Event Source Manifests and Wix .... is there a good example?

( Regards Thomas -Original Message- From: Rob Mensching [mailto:r...@robmensching.com] Sent: 30 January 2014 20:03 To: General discussion about the WiX toolset. Subject: Re: [WiX-users] Event Source Manifests and Wix is there a good example? If EventManifest can't do it, it

[WiX-users] Event Source Manifests and Wix .... is there a good example?

eed to install the 2 files (the .man and the .dll that are the event source). But how do I formulate that best with the registration? Can util:EventManifest be used here or do I Really need to do a custom action for that (and can someone help me make on

Re: [WiX-users] Chaining .NET 3.5 in Burn

Thank you :) Med venlig hilsen / Best regards, Thomas Due  - Software Developer Tel: +45 8678 5500 Fax: +45 8678 5210 Johann Gutenbergs vej 5-9, Aarhus N, Denmark t...@scanvaegt.dk | www.scanvaegt.dk This e-mail and its attachments are intended for the named addressee only and may contain

Re: [WiX-users] Support for VS2013 Express

876/is-wix-compatible-with-visual-c-sharp-2010-express Regards Thomas -Original Message- From: Graham Allwood [mailto:gallw...@sdasoftware.net] Sent: 11 January 2014 10:39 To: wix-users@lists.sourceforge.net Subject: [WiX-users] Support for VS2013 Express Hi, I'm using VS2013 Expre

[WiX-users] Chaining .NET 3.5 in Burn

chaining .NET 3.5? Best regards, Thomas Due  - Software Developer -- Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance af

[WiX-users] Possible bug in 3.8

3.5), but now I have the exact same issue with 3.7. I uninstalled 3.8 and installed 3.7, without restarting or anything. Med venlig hilsen / Best regards, Thomas Due  - Software Developer Tel: +45 8678 5500 Fax: +45 8678 5210 Johann Gutenbergs vej 5-9, Aarhus N, Denmark t...@scanvaegt.dk

[WiX-users] How to Make a Wix Installer for my Outlook Addin

I am a newbie to Wix Installer. I want to make an Installer for my Outlook Addin in Wix. How can I do it. -- *Regards* * * *Sanju Thomas * *91- 9945535476 * *sanju...@gmail.com* * <http://www.intelligo.in/>* * *CONFIDENTIALITY NOTICE: If you have received this e-mail in error,

Re: [WiX-users] MBA - .NET Framework 4 keeps trying to install

o you mean you simply add a directory redist next to your setup? I would have wanted one single executable containing all my redistributables with my application installer. Thanks a lot, Thomas -- View this message in context: http://windows-installer-xml-wix-toolset.687559.n2.nabble.com/MBA-N

Re: [WiX-users] MBA - .NET Framework 4 keeps trying to install

instead of reinventing the wheel -> > http://wix.sourceforge.net/manual-wix3/wixnetfxextension.htm As far as I understood, even using the .Net Framework 4.0 Full standalone setup (NetFx40Redist) requires an Internet connection. But some of my users don't have an Internet connection

Re: [WiX-users] Creating patches

Ah gotcha. Thanks :) /Thomas > -Original Message- > From: Phil Wilson [mailto:phil.wil...@mvps.org] > Sent: 22. maj 2013 19:57 > To: 'General discussion for Windows Installer XML toolset.' > Subject: Re: [WiX-users] Creating patches > > If you want to s

[WiX-users] Avoid multiple instances of Bootstrapper Wix

I have a Wix Bootstrapper Exe which internally invokes an MSI file. Can some one help me  to ensure that only a single instance of Boostrapper will get installed and will be seen in ARP.  I have seen that if i makes comes changes to Bundle.wxs, even though the version number and the Upgrade code

Re: [WiX-users] Creating patches

Would you mind expanding on that? Because I don't know what you mean... /Thomas > -Original Message- > From: Phil Wilson [mailto:phil.wil...@mvps.org] > Sent: 21. maj 2013 18:58 > To: 'General discussion for Windows Installer XML toolset.' > Subject: Re

[WiX-users] Viewing File size of Boostrapper contents

Is there any way or tool by which we can view the individual file sizes that is contained inside a Wix bootstrapper. My bootstrapper internally contains .Net installer and MSI , but when viewed using 7 zip it is showing u0 ,u1 etc and we cant determine what is contained inside each file. ---

Re: [WiX-users] Creating patches

is because my dialog next actions are defined something like this: 1 I would need a check for Installed, right? So something like this instead: NOT Installed Installed But how would this perform when doing a major update? /Thomas > -Original Mess

Re: [WiX-users] Creating patches

I agree, I am quite certain there is something I am missing, like a name or ID that must be identical. However, if it is documented anyway, I have failed to find it. /Thomas > -Original Message- > From: MrWiX [mailto:philipp.ew...@asamnet.de] > Sent: 21. maj 2013 10:32 > T

Re: [WiX-users] Creating patches

No, I don't think so. Is that the cause? /Thomas > -Original Message- > From: Bob Arnson [mailto:b...@joyofsetup.com] > Sent: 19. maj 2013 17:08 > To: wix-users@lists.sourceforge.net > Subject: Re: [WiX-users] Creating patches > > On 13-May-13 02:47, Thomas D

Re: [WiX-users] Creating patches

Is no one able to help me? /Thomas > -Original Message- > From: Thomas Due > Sent: 13. maj 2013 08:48 > To: 'General discussion for Windows Installer XML toolset.' > Subject: RE: [WiX-users] Creating patches > > Hello, > > Yes I am using 3.7 for

[WiX-users] MultiLingual MSIs – Error applying transforms. Verify that the specified transform paths are valid.

Hi All, I am planning to create a multilingual MSI. I have created MSI file for the English local and have created MST File for German using MSITran.exe . I am invoking the msi from the bootstrapper. I specify German language to be shown in the MSI ui by specifying the following in the WIx boostr

[WiX-users] Localization of Wix Bootstrapper

 Hi All,   I have query regarding localizing Wix Bootstrapper and then invoking appropriate MSI. I have the following binaries a)              a)   Wix Bootstrapper Exe b)     b)  Localized MSI files for English,French and German cultures created using Wix MSI Project(Visual Studio)   I am plannin

Re: [WiX-users] Creating patches

. Also, make sure there are differences between your target and upgrade. I have a feeling that I have an ID mismatch somewhere, but I cannot figure out where. /Thomas > -Original Message- > From: Rob Mensching [mailto:r...@robmensching.com] > Sent: 9. maj 2013 16:54 > To:

[WiX-users] .Net 3.5 SP1 using WiX Burn

Hi All, I need to install .Net3.5 SP1 as a prerequiste if not met using Wix. I have written code using Wix Burn.   My plan is to include  dotNetFx35setup.exe -  to be a part of the package(in package) and i have specified it in ExePackage:SourceFile.  If .net 3.5 is not installed, i execute dotN

[WiX-users] .Net installation using Wix

Hi , I have the following requirement  I need to develop an installer using Wix . I need to check whether .Net 3.5 SP1 is installed or not and if the prerequisite is not met, must show a messagebox(dialog) to the user  telling that it is not installed - Do you wish to continue the install .Net,

[WiX-users] .Net 3.5 Installation using WIx MSI

Following are my requirements a) I need to check the .Net 3.5 prerequisites and if it is not present, must install the .net component followed by the instllation of my application which includes copying the files to Programs files. Can any one suggest is there any way to the do the same i

Re: [WiX-users] Creating patches

book properly explains WHAT I need to do, and WHY. Mainly they just show me HOW. Is any able to help get past this issue? /Thomas Due > -Original Message- > From: Thomas Due [mailto:t...@scanvaegt.dk] > Sent: 3. maj 2013 09:40 > To: General discussion for Windows Inst

Re: [WiX-users] Creating patches

indowsInstallerXml.Binder.BindDatabase(Output output, String databaseFile) at Microsoft.Tools.WindowsInstallerXml.Binder.Bind(Output output, String file) at Microsoft.Tools.WindowsInstallerXml.Tools.Pyro.Run(String[] args) Any help will be appreciated. /Thomas Due > -Or

Re: [WiX-users] Creating patches

matching baseline authored in the patch. Also, make sure there are differences between your target and upgrade. /Thomas Due > -Original Message- > From: Thomas Due > Sent: 2. maj 2013 11:31 > To: 'wix-users@lists.sourceforge.net' > Subject: Creating patches >

[WiX-users] Creating patches

Hello, I am trying to grasp the concept of minor and small upgrades, but I am having some trouble with getting it to work. First of all, it doesn't seem to work at all with 3.7. I have downgraded my WiX to 3.5, and there something happens at least, but my msp seems to be empty when I examine

[WiX-users] Burn in the ARP

I've seen tangential posts regarding this, but no answer quite fit what I was looking for. I have a bootstrapper which will install several prereq's and then my product's MSI. In testing, I noticed that if the product is uninstalled from ARP and then the bootstrapper is run it thinks it is stil

Re: [WiX-users] Does anyone have a VSIX example

me:Pro /skuVersion:11.0 /admin "C:\Dev\Temp\MyVSIX.vsix" it works. I have built my vsix with VS2012 SDK and tried with the option "The VSIX is installed by Windows Installer" both enabled and not. please advice :) Thanks, //Thomas -- View this message in context: http://win

[WiX-users] Adding background to burn theme?

I am attempting to add an image that will act as a background for each burn page. If I only define the image in one page it will sometimes work, other times the controls on the page will be overwritten by the image. If I add an image to each Page then no controls appear until they receive focu

Re: [WiX-users] Wix Burn 3.7 & .NET 4.5

users] Wix Burn 3.7 & .NET 4.5 Does Burn not just install .NET 4.5 in your bootstrapper's main apply phase along with everything else? If you put it first in your chain, it should get installed first by Burn. Nicholas On 10 January 2013 21:19, Thomas Hammond wrote: > I updated

[WiX-users] Wix Burn 3.7 & .NET 4.5

I updated my bundle to use .NET 4.5 as the Mba Prereq. This works fine if I install on a machine that does not have .NET 4.x installed. However, if I run on a system that already has 4.0 installed, Burn does not install .NET 4.5 as a prereq before loading my managed bootstrapper application. Eve

[WiX-users] Using WIX with the new ETL EventSource mechanisms...

install/uninstall nicely adds/removes the log (Reflexo.Agent). Am I misunderstanding something? I think I should also register the event source, but - well - I fail to find a WIX tag for that. Regards Thomas -- LogMeIn

[WiX-users] Alter Packages in Custom BA? [BURN]

I am making a custom bootstrapper WPF UI to allow consumers to select which MSIs and specific features within MSIs to install. I think I have my head around how to select features within an MSI by setting Engine.StringVariables["TEMPVAR"] and then setting an MSIProperty to that Burn variable.

[WiX-users] Feature or Chained MSI?

I am exploring moving a moderate size installer to WiX and I am stumbling through with some good successes thanks to the active support community out there. My application has a large amount (~1gb) of reference data that does not change much from version to version. This data is not required f

[WiX-users] unsubscribe

Email Disclaimer -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_s

[WiX-users] unsubscribe

___ Douglas Thomas Sr. Sftw. Developer RedPrairie 308 N. Cleveland-Massillon Rd. Akron, OH 44333-9302 Office: (330) 665-1698 Fax: (330) 665-2915 www.RedPrairie.com<http://www.redprairie.com/> doug.tho...@redprairie.com Email Disclaimer<http://www.redpr

Re: [WiX-users] Burn - InstallAnywhere ExePackage

Hi, I guess I have to go the same way for the PostgreSQL installer (made with bitrock). How do you have created the stub EXE? Is ther something within the WIX toolset or do I have to create a C# project? Best regards, Thomas Von:jhennessey An: wix-users@lists.sourceforge.net

[WiX-users] Antwort: Re: ERROR1603

n different colors. When jumping to an error you have to scroll some lines up to find the reason of the error like Rob said in his blog. - Cheers, Thomas Von:James Green An: "General discussion for Windows Installer XML toolset." Datum: 25.01.2012 17:21 Betreff:R

[WiX-users] ComboBox - display mismatch between value and text

ry "TS8980S/TS-RRM" I get displayed "TS8980S-TSRRM" in the combobox and if I open the combobox list again "TS8980S/TS-RRM" is not marked as the seolected entry. Can someone explain to me what happen here and how I could fix it? I use wix 3.6.

[WiX-users] Component GUID * - same for two different builds

r what can I do to get a different GUID generated for the different versions? Many thanks, Thomas -- All the data continuously generated in your IT infrastructure contains a definitive record of customers, application p

[WiX-users] Antwort: Re: util:RemoveFolderEx with condition?

n the dialog is checked. Cheers, Thomas -- All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity, and more. Sp

[WiX-users] Major Upgrade - Ask user if he would like to upgrade

o ask the user if he would like to upgrade from the first package to the second? Cheers, Thomas -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev

[WiX-users] util:RemoveFolderEx with condition?

should be deleted or not. For this I set a property based on a checkbox. Now I can't find a way how to set a condition based on my property to the RemoveFolderEx element. Is it possible or do I work into the wrong way? C

[WiX-users] Antwort: Re: What happend to minor upgrade using wix

Hi Mat, thanks for the hint with the tree version numbers. I will try by changing the third number. Just to clarify. I had used in InstallShield pure MSI packages. Cheers, Thomas Von:"Skildum, Mathew" An: "General discussion for Windows Installer XML toolset."

[WiX-users] What happend to minor upgrade using wix

to launch version 1.0.0.2 without these properties and the setup came up with a messagebox if I would like to upgrade. I feel confused. Is it now really needed to write a bootstrapper? If yes, is there an example somewhere? Cheers

Re: [WiX-users] Changing registry key name for uninstall

my old company we used InstallShield and here I got my installers registered over the product name. So I don't see a problem from msi side. Cheers, Thomas Von:Dario Griffo An: "General discussion for Windows Installer XML toolset." Datum: 06.08.2011 23:27 Betreff:

Re: [WiX-users] Executing an application after installation

Ok, I get that. As I wrote it is at worst a minor inconvenience. However, I still need to know how I pass a command-line argument to the application I run on ExitDialog exit. TIA Thomas -Original Message- From: Bob Arnson [mailto:b...@joyofsetup.com] Sent: 18. oktober 2011 04:53 To

Re: [WiX-users] Executing an application after installation

ss at least one command-line argument to the application, like I wrote below, but the way I illustrated it does not work. I just got a 2896 error. So using the method described, how do I pass one or more command-line arguments to the application from the installer? Thanks, Thomas Due -O

Re: [WiX-users] Executing an application after installation

parameters. How do I do that? I have this: ... NOT Installed ... Do I simply add the parameters to the property value, like this: Value="[#MasterConfig] -lan=[INSTALLLANGUAGE]" Thanks, Thomas Due -Original Message- From: John Cooper [mailto:jocoo...@jac

Re: [WiX-users] Executing an application after installation

Hello, I can't seem to find it in the docs? /Thomas Due -Original Message- From: Rob Mensching [mailto:r...@robmensching.com] Sent: 13. oktober 2011 15:55 To: General discussion for Windows Installer XML toolset. Subject: Re: [WiX-users] Executing an application after install

[WiX-users] Executing an application after installation

vated priviliges I don't understand why it is not possible to run the application. What can I do to ensure that the application will always execute, even on Windows 7 with the UAC enabled? Thank you, Thomas Due -- Al

[WiX-users] Sharing file components between directories

containing the files each have in common. But I would rather have a single installer and then handle the separation through features. But how do I handle multiple installationpoints for some files? Thanks, Thomas Due

Re: [WiX-users] GUID vs. * for components (Was: RE: WiX-users Digest, Vol 64, Issue 49)

Rob, That was a most thorough answer, thank you very much. My questions (regarding THIS subject) has been fully answered. Med venlig hilsen / Best regards Thomas Due Software udvikler Scanvaegt Nordic A/S Fra: Rob Mensching [r...@robmensching.com

Re: [WiX-users] GUID vs. * for components (Was: RE: WiX-users Digest, Vol 64, Issue 49)

changing all the component GUIDs to *? Med venlig hilsen / Best regards Thomas Due Software udvikler Scanvaegt Nordic A/S -Original Message- From: Rob Mensching [mailto:r...@robmensching.com] Sent: 26. september 2011 15:44 To: General discussion for Windows Installer XML toolset. Subject: Re

Re: [WiX-users] WiX-users Digest, Vol 64, Issue 49

f a set of assemblies is shared by two different installers, what would be the best way to set the GUID on the components containing these assemblies? Should I set a fixed GUID, or use an *? Med venlig hilsen / Best regards Thomas Due Software udvikler Scanvaegt

[WiX-users] Antwort: Re: Std Bootstrapper failed: Error 0x800b010a

Thanks, I've created bug "Bootstrapper failed to launch signed installer (no WWW)" with ID: 3380917 https://sourceforge.net/tracker/?func=detail&aid=3380917&group_id=105970&atid=642714 Cheers, Thomas Von:Tobias S An: "General discussion for Windows

Re: [WiX-users] Std Bootstrapper failed: Error 0x800b010a

get a security warning about an unknown publisher and that the system could not validate the signature. In this dialog I could choose if I will abort or launch the installation. I will open a bug as requested (need to check how to do). Many thanks so far, Thomas Von:Rob Menschin

Re: [WiX-users] Std Bootstrapper failed: Error 0x800b010a

Hi Tobias, thanks for your hints. But the real problem is not VMWare. Our real target system will be restricted testsystem without internet connection. So I really need a way to launch the bootstrapper on a system without internet connection. Cheers, Thomas Tobias S 22.07.2011 11:40

Re: [WiX-users] Std Bootstrapper failed: Error 0x800b010a

without internet connection? Thanks, Thomas Rob Mensching 21.07.2011 17:18 Bitte antworten an "General discussion for Windows Installer XML toolset." An "General discussion for Windows Installer XML toolset." Kopie Thema Re: [WiX-users] Std Bootstrapper fail

[WiX-users] Std Bootstrapper failed: Error 0x800b010a

h the Bootstrapper executable I get the Error 0x800b010a when the nested installer should be executed. What have I done wrong? Thanks in advance, Thomas Here is the full log: [01B4:05BC][2011-07-21T09:23:22.373+01:00]: Burn v3.6.1915.0, path: Z:\ddrive\Transfer\PostgreSQL\PostgreSQL_Bootstrapper2.exe,

Re: [WiX-users] DIFxApp does not properly rollback to the old driver when doing a major upgrade

I believe that's it. We opened a case with the DIFXApp team on this issue last year and got a will not fix response but no real explanation. Thank you! Thanks, Tom -Original Message- From: jjbean [mailto:jonks2...@yahoo.co.uk] Sent: Friday, July 01, 2011 3:27 PM To: wix-users@lists.so

Re: [WiX-users] unhandled exception in light

. Thanks, Tom -Original Message- From: Bob Arnson [mailto:b...@joyofsetup.com] Sent: Monday, June 06, 2011 8:49 PM To: wix-users@lists.sourceforge.net Subject: Re: [WiX-users] unhandled exception in light On 02-Jun-11 09:08, Thomas Svare wrote: > I'm able to log a bug, 3310378, but I c

Re: [WiX-users] unhandled exception in light

; right hand side below Support -> Bug database (or directly http://sourceforge.net/tracker/?group_id=105970&atid=642714 ). Then please log in or register at sourceforge and you should be able to submit it... 2011/5/31 Thomas Svare : > Hello, > > I've done some cursory searching but

Re: [WiX-users] unhandled exception in light

: Re: [WiX-users] unhandled exception in light http://wix.sourceforge.net/ -> right hand side below Support -> Bug database (or directly http://sourceforge.net/tracker/?group_id=105970&atid=642714 ). Then please log in or register at sourceforge and you should be able to submit it... 2011/5

Re: [WiX-users] unhandled exception in light

eforge.net Subject: Re: [WiX-users] unhandled exception in light On 25-May-11 15:31, Thomas Svare wrote: > After several missed opportunities I've finally got a crash dump and was able > to run a quick analysis. Using Wix 3.6.1706.0 light crashes intermittently > on our build machin

Re: [WiX-users] unhandled exception in light

To: wix-users@lists.sourceforge.net Subject: Re: [WiX-users] unhandled exception in light On 21-Apr-11 11:47, Thomas Svare wrote: > Grasping at straws I set the number of threads to use during cab creation to > 1 but that did not help. I'm at the point where I need to debug and I was &

[WiX-users] unhandled exception in light

Hello, I'm having an intermittent problem with light that seems to have started with Wix 3.5. I'm now using the released version of 3.5 but this issue was observed on pre-release builds of 3.5. During the build of a msi I'm getting the below unhandled exception events and error to stderr: 4/

[WiX-users] Handling project output that is NOT primary output (xml, pdb)...

ot; that I also want to be part of the component: * The intellisense XML file (yes, for some dll's we do that). * Most important, the PDB file so that one can see nice errors, not byte offsets. Any way to address those easily via the $(var mec

Re: [WiX-users] Best Practice in Deploying Database

s around middle management. -Original Message- From: Dikhi Wahyudi Aras [mailto:dikhi.wahy...@mitrais.com] Sent: 29 March 2011 09:27 To: General discussion for Windows Installer XML toolset. Subject: Re: [WiX-users] Best Practice in Deploying Database Thank you Thomas for sharing your th

Re: [WiX-users] Best Practice in Deploying Database

software and MAY want to tune it (locations, number of files etc.) unless it is a trivial thing to do. That said I mostly work into larger databases (1000+gb) that require carefull adjustment of the physical layout. Regards Thomas -Original Message- From: Dikhi Wahyudi Aras

Re: [WiX-users] Best practice for making dependent installers

No one? /Thomas Due -Original Message- From: Thomas Due [mailto:t...@scanvaegt.dk] Sent: 11. februar 2011 09:00 To: wix-users@lists.sourceforge.net Subject: [WiX-users] Best practice for making dependent installers Hi, I am maintaining the installer for our main product. This

[WiX-users] Best practice for making dependent installers

ike a general scheme for deployment extensions, but my knowledge and understanding of WiX and MSI is not so complete that I can think my way through the problem on my own. So I turn to you for some tips, guidelines and suggestions? I am happy to provide more information should it be needed. /Thoma

Re: [WiX-users] (no subject)

FYI... Thank you very much, Thom! That was the solution. Greets Thomas BICA AG Retail Solution Company Switzerland -Ursprüngliche Nachricht- Von: Thom Leigh [mailto:t...@mondago.com] Gesendet: Freitag, 7. Januar 2011 09:15 An: General discussion for Windows Installer XML toolset

Re: [WiX-users] Problem with the upgrademodus

Thank you very much, Thom! That was the solution. Greets Thomas BICA AG Retail Solution Company Switzerland -Ursprüngliche Nachricht- Von: Thom Leigh [mailto:t...@mondago.com] Gesendet: Freitag, 7. Januar 2011 09:15 An: General discussion for Windows Installer XML toolset. Betreff: Re

[WiX-users] Problem with the upgrademodus

Sorry, I forgot the mail subject. Please see the mail below, thanks. Thomas Mathis BICA AG Retail Solution Company Switzerland -Ursprüngliche Nachricht- Von: Mathis Thomas [mailto:t...@bica.ch] Gesendet: Donnerstag, 6. Januar 2011 11:14 An: wix-users@lists.sourceforge.net Betreff

[WiX-users] (no subject)

ange this behavior? Somthing like: - Abort installation without return error code, but only do this in commandline mode or with special commandline parameter. - Continue installation but change automatically into the repair mode. Optionaly switch on this behavior with special commandline parameter.

Re: [WiX-users] QtExecDeferred and using a property in the cmd line

> 400 NOT (SKIPCONFIGUREIIS OR Installed) AND VersionNT > 400 in your case: Thanks, Thomas S. Trias Senior Developer Artizan Internet Services http://www.artizan.com/ Original Message Subject: Re: [WiX-users] QtExecDeferred and using a property in the cmd line

Re: [WiX-users] Setting "List folder contents" permission on folder

with our changes. I can provide the files from our modified 3.0.4923 if you would like. Thanks, Thomas S. Trias Senior Developer Artizan Internet Services http://www.artizan.com/ Original Message Subject: Re: [WiX-users] Setting "List folder contents" permission on f

[WiX-users] Getting the name of the currently executing CustomAction

eems silly; then again, it may be the only way. In review, I even answered this question once for someone else, using this method, so I fear I already know the answer... Thanks, -- Thomas S. Trias Senior Developer Artizan Internet Servi

Re: [WiX-users] A couple of questions regarding sql server and wix installer

Hmm, that looks promising. I will look into it, however assuming that I don't want to include any third-party components (not saying that I don't, just assuming), is what I want doable without a lot of work? Thanks, Thomas Due -Original Message- From: dB. [mailto:dbl...@

[WiX-users] A couple of questions regarding sql server and wix installer

): However, how would I formulate this if the database already exists? Can I only handle that sort of thing in the actual script, or does the SqlWixExtension give me any tools to work with? Thanks, Thomas Due

  1   2   3   4   5   >