(See attached file: XFree86.0.log)
when starting the X server there is a fatal server error message and the X
server crashes the error reads a follows:
Fatal Server error:
could not open default font 'fixed'
Do let me know the solution for this problem. Looking forward for your
reply
Please find t
Hi there
I got Athlon 1800 XP, Gygabyte GA-7VA, GForce 440. After fresh instalation: Failed to
open /dev/io for extended I/O ... whole log inside mail before :) For more infoz plz
mail and help me :)
Peter Hudak
___
XFree86 mailing list
[EMAIL PROTEC
Title: Message
Sir/Madam
Please find the log
file attached, regarding the error which I encountered during the boot
sequence.
Kindly send me the
details for resolving the same.
Regards
Tarun
Jain.
XFree86.0.doc
Description: MS-Word document
Hello,
I am installing Red Hat 8.0 for the first time on hdb, on a system with
a Windows ME on hda (dual boot). I get a "Fatal server error: no screen
found" message. I have a Diamond Stealth 64 series display card(if that is
the problem). I can access the text login, but I can't get X
Hello,
I am new to Linux and Redhat. I am trying to
install Redhat Linux on hdb for the first time (hda on
Windows ME), but I can't get to the GUI display (after
about 5 reinstalls)I don't know how to copy the
/var/log/XFree86.0.log to floppy so I could have
attached the error log here (I'm usi
I am running Vector distribution and I am getting the following error.
Could not init font path element unix:/7100, removing from list!
Fatal Server Error:
could not open default font 'fixed'
I tried the resolution that another post had suggested but did not work, here is that
fix.
chmod a+r /
sir/madam,
i got this error(the full server output is in the
attached file)and now i cant start linux in gui mode.
pls advise.
sachin
__
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
XFree86.0.log
Descr
Hi,
I've bought a new hard disk recently; and tried making a clean install of SuSE 8.1.
I've had a problem with my screen configuration.
Suse installation determined these:
Monitor - vesa [EMAIL PROTECTED]
Graphics Chipset - Intel 82810E CGC
So the chipset is ok; but my monitor is IBM E74; whic
I am running Red Hat Linux 8.0 on a Gateway E-1400
machine. Today the desktop no longer comes up after logging in (which is
graphical). The error message I am getting is:
_XSERVTransSocketINETCreateListener:...SocketCreateListener()
failed
_XSERVTransMakeAllCOTSServerListeners:server
alrea
The attached log file shows the error I now get when trying to start the
x-server. This started to occur after I ran "up2date" to update the kernal
and some of the kde features. The file "up2date.log" is the relevant
portion of the up2date log which shows exactly which packages I downloaded
and i
Hi
I have the following error message when trying to open default font 'fixed'
"Error loading keymap/var/tmp/server-0.xkm"
Couldn't loadXKM keymap,falling back to pre-XKM keymap
Couldn't init font path element unix/:7100,removing from list!
So what could the problem be?
___
Hello XFree86 Team
I had a problem configuring my Laptop ACER 350C. It's a little old, but i want to install Linux 7.0 in it.
Attached i send you the log file, it's says something related with "can't open module v41"
Thanks for your advice.
Boris
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.9
To Whom It May Concern:
I’m having problems establishing the log-in screen when
start my computer. Enclosed, you will find the XFree86.0.log file.
Any help will be appreciated.
Thanks,
Dennis Muench
XFree86.0.log
Description: XFree86.0.log
I am getting an error
Fatal server error:
no screens found
When I try to run Mandarake Linux 9.0 in graphical
mode
Please help me in getting to know the solution for
this problem. I went to xfree86.org website but was
not able to identify which file to download...
There is a lot of confusio
Dear friends:
Following your instructions about fatal errors, I attach a log file
showing a problem when I try to init my computer in windows mode with
"startx" command.
Please, could you help me?
Thanks in advance.
Tomás Mateo
XFree86.0.log
Description: Binary data
I am getting a fatal server error while booting
into Linux redhat 7.3.
It gives me a Fatal server error:
xf86MapPciMem: could not mmap PCI memory
[base=0xe000,hostbase=0xe000,size=0] (invalid argument)
I think there is also a problem reading my video
display drivers, my laptop is
I am getting a strange error that says "Cannot move
old logfile "/var/log/XFree86.0.log.old" This happens when trying to log on as a
user. root is ok. I am running a Dell 2650 Server Dual 3.02 Ghz proc 4GB RAM,
Mandrake 9.1. If anyone can help please let me know.
Thanx,
Douglas Pike
Sir,
I have a PC running redhat 9. Now the PC is showing some error while booting through XFree86 sever.
"Fatal server error:
Unable to load required base modules, Exiting..."
Here i am attaching the XFree86.0.log for ur refference and give me solution for this as soon as possible.
Sheri
What can I do when xserver writes me this fatal server error:
could not open default font 'fixed'
Please help me
E-mail zdarma na cely zivot: http://email.seznam.cz
___
XFree86 mailing list
[E
Hi,
find in the attach the log file
related to my Xserver crash
What should I do ?
--
_
Cesar Fernandez Phone: 34-973-702738
University of LleidaFAX: 34-973-702702
Com
Je
veux démarrer mon X Server, mais j'ai cette erreur.
Fatal server
error:PAM authentication failed, cannot start X
server. Perhaps you do not have
console ownership?
When reporting a problem related to a server crash,
please sendthe full server output, not just the last messages
Hello there
Running RH9
X Server won't come up..message I get is
Fatal Server Error
Could nor topen default font 'fixed'
Could you advise a fix??
Kindest regards
Imran.javeed
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listi
Fatal Server Error
Slackware 9.1
Kernel 2.6.3
xfree86 4.3.0
Any idea please? - Thanks a lot in advance - Mauro
(Italy)
-
XFree86 Version 4.3.0Release Date: 27 February
2003X Protoc
could not open default font
when reporting a problem related to a server crash, please send the full server
output, not just the last message.
XIO: fatal IO error 104(Connection reset by peer) on X server ":0.0" after 0 request
(0 known processed) with 0 events remaining.
please try helpme to res
Hello
I am using mandrake linux 9.2 operating system and is my mail server. When I restart the system to change hardware (mouse) it start at the console. I login as root and entered my root password. When I attempt to swith to graphical user interface (ie kde) it report the following error
fata
xfree86，您好！
-bash-2.05b$ xinit
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not have console ownership?
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report prob
Sir,
I am reporting a problem related to installing xfree86 in one of my
freebsd machines. I am attaching the log file for your referrence.
Many thanks,
-Ariel
XFree86.0.log
Description: Binary data
Error "fatal server error" running XFree86 3.3.6 on my Debian 3.0 using a
Cirrus Logic card with 800x600x256 mode.
If i run whith 640x480x256 configuration mode all work fine.
Extract of XF86config:
ection "Device"
Identifier "Cirrus"
VendorName "CirrusLogic"
BoardName "GD5420"
Hi everyone,
I've been trying to to solve this for a couple of days now. I've read
all the documentation I could find, with no changes. I've installed
all the autodection packages to see if my variables were wrong. I've
installed XFree86 manually (not using apt-get x-window-system).
The system is
Hi !!
This message was displayed when mi Xserver Crashes!!
Can you help me to resolv this problem
I aprreciate your help!!
Saludos from Obregon, Sonora, MEXICO!!
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Hi,
I had just started my linux machine and i faced this problem.
GUI login screen is not coming and after booting blank screen comes with flickering and later displaying message unable to start XServer. and when i disable gdm in the console screen it displays.
Login:gpm: oops() invoked fr
dear sir ,
i am new to use linux and i had installed linux9.0
on my system after winxp.i m ble to intall linux on my system but while
installing i skep the step to choose graphic card .i have p3 computer with tomto
board and intel 800MH processor .and now i am unable to go on graphic modeusin
Attn. Service department
Sir
We have problem with our Heuft spectrum, Type - HBBVXT199, Sl. no.
2RG016685/ 2
Fault details:
FATAL SERVER ERROR
Can't open log file " /var/log/xfree86.0.log"
xinit: connection refused (error no. 111 ) unable to connect to x server
x init: no such process ( error n
Hi,
I am trying to install redhet linux 7.3 on an IBM intellistation M
pro 6850. After the installation, I am able to login in at the command prompt.
But once i type startx, it says Fatal Server Error: NO screens found.
I am attaching the Xfree86 log with this email for you to have l
On Wed, 15 Jan 2003 [EMAIL PROTECTED] wrote:
> (See attached file: XFree86.0.log)
>
> when starting the X server there is a fatal server error message and the X
> server crashes the error reads a follows:
> Fatal Server error:
> could not open default font 'fixed'
> Do let me know the solution fo
Title: RE: [XFree86] Fatal Server Error
check "xfs" running
check access rights to font paths
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 15, 2003 07:53
> To: [EMAIL PROTECTED]
> Subject: [XF
Richard Yague schrieb:
Hello,
I am installing Red Hat 8.0 for the first time [...]
> I can access the text login, but I can't get X server working (is that
> the GUI?).
Yes, basically. You still need some more stuff, e.g. a window manager.
KDE or GNOME will start one.
I don't even know how
Is the file there?
Are the pemissions OK?
David
- Original Message -
From: "Hixon, Geoff" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 12, 2003 8:50 AM
Subject: [XFree86] Fatal Server Error
> I am running Vector distribution and I am ge
the bit about "could not open default font 'fixed'" was explained in depth
here.
Sent: Tuesday, February 04, 2003 5:30 AM
Subject: Re: [XFree86] Error Starting X
You can use Google to search the site, just go to the Advanced Search
Options and set the Domain Option (in the first block of options
On Sun, 9 Mar 2003, Delbert Guy Ferry wrote:
> The attached log file shows the error I now get when trying to start the
> x-server. This started to occur after I ran "up2date" to update the kernal
> and some of the kde features. The file "up2date.log" is the relevant
> portion of the up2date log
On Thursday, July 17, 2003 8:52 am, Muench, Dennis wrote:
> I'm having problems establishing the log-in screen when start my
> computer. Enclosed, you will find the XFree86.0.log file. Any help
> will be appreciated.
This question has been answered countless times throughout the eternal
struggl
equires an string value
check xkb option(or) run in single usr mode /usr/X11/xf86config there you
select n option of xkb option
by
muneesh
From: Syed Moiz Ali <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [XFree86] Fatal server error .
Date: Wed, 3 S
On Tue, 2003-09-09 at 05:02, Tomás Mateo wrote:
> Dear friends:
>
> Following your instructions about fatal errors, I attach a log file
> showing a problem when I try to init my computer in windows mode with
XFS isn't running..
http://www.europe.redhat.com/documentation/HOWTO/XDMCP/ts.php3
From: "Douglas Pike" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Subject: [XFree86] Fatal Server Error
Date: Tue, 30 Sep 2003 15:15:00 -0700
I am getting a strange error that says "Cannot move old logfile
"/var/log/XFree86.0.log.old&quo
This seems to be a common problem on RH 9. I don't think
anyone knows why it happens yet. Somehow, some crucial XFree86
modules are missing. Reinstalling XFree86 is the only solution
I know of.
Mark.
On Sat, 18 Oct 2003, [iso-8859-1] sheril jose wrote:
> Sir,
>
> I
Hi,
I have installed XFree86 4.3.0 from this url ftp://ftp.xfree86.org/pub/XFree86/
in my linux intel system for this video driver is cirrus.
i have the following erros,
Fatal Server error,Server is already active display.0,if this server is no longer running,remove /tmp/.x0-lock and start ag
Hi all,
i'm using :
OS - redhat Linux 9
- KDE
I get following errors at boot time :
-
server Authorization dir (doemon / ServerAuthDir)
is set to /var/gdm is NOT owned by user gdm &
group gdm.
Please correct the ownership or gdm con
root wrote:
> could not open default font when reporting a problem related to a server
> crash, please send the full server output, not just the last message. XIO:
> fatal IO error 104(Connection reset by peer) on X server ":0.0" after 0
> request (0 known processed) with 0 events remaining. please
kabiru maiyama wrote:
> Hello
> I am using mandrake linux 9.2 operating system and is my mail server. When I restart
> the system to change hardware (mouse) it start at the console. I login as root and
> entered my root password. When I attempt to swith to graphical user interface (ie
> kde) it
Remove the BusID line from the Section "Device" in your XF86Config-4
file. It's wrong, and the server would have found the card by itself
if it wasn't for the explicit instruction to look for the card in the
wrong place.
Mark.
On Thu, 14 Oct 2004, Erik Knight wrote:
>
Hey thanks a lot,
That totally fixed the problem. Those 'wrong' values were actually
what I input during the config process. I ran lspci when it asked for
that info and I guess I didn't really understand the output properly.
However if I just left that step blank, or later deleted the entry
from
I am not able to start X session after i installed
Xfree864.4.0
i installed the folowing other than the mandatory
files
Xdrm.tgz
Xnest.tgz
Xfsrv
Xvfb
not able to 'make' in
/usr/X11R6/src/linux/kernel/xdrm files
error: no member count
i am attching the xfree86.0.log file
please repl
After type startx, it
only show the screen of nVIDIA logo, then jump out back to console with
following error code, what is that mean? and how to solve it out?
Fatal server
error:
Caught signal 11. Server aborting
XIO: fatal IO error 104 (Connection reset by peer) on X
server ":0.0"
The server needs to have write access to /var/log/ so it
can write its log file. It sounds like your server doesn't
have root permissions. It's typical to make it suid root.
Mark.
On Mon, 16 Jan 2006, Mathew John wrote:
> Attn. Service department
>
> Sir
>
> We have p
EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Mark Vojkovich
Sent: Monday, January 16, 2006 11:44 AM
To: Mathew John
Cc: xfree86@xfree86.org
Subject: Re: [XFree86] FATAL SERVER ERROR
The server needs to have write access to /var/log/ so it
can write its log file. It sounds like your server do
ent: Monday, January 16, 2006 11:44 AM
> To: Mathew John
> Cc: xfree86@xfree86.org
> Subject: Re: [XFree86] FATAL SERVER ERROR
>
> The server needs to have write access to /var/log/ so it
> can write its log file. It sounds like your server doesn't
> have root permissions.
kamesh raja swaminathan wrote:
> I have installed XFree86 4.3.0 from this url
> Fatal Server error,Server is already active display.0,if this server is
> no longer running,remove /tmp/.x0-lock and start again
>
> this comes when attempt to the following command,
> XFree86 -configure.
rm -rf /
On Mon, Mar 21, 2005 at 08:07:31PM -0800, chelfan wrote:
> I am not able to start X session after i installed
>Xfree864.4.0
>
> i installed the folowing other than the mandatory
>files
>
> Xdrm.tgz
> Xnest.tgz
> Xfsrv
> Xvfb
>
> not able to 'make' in
>/usr/X11R6/src/linux/kernel/xdrm files
>
> e
On 6/27/05, Sean <[EMAIL PROTECTED]> wrote:
> After type startx, it only show the screen of nVIDIA logo, then jump out
> back to console with following error code, what is that mean? and how to
> solve it out?
Since you said you see the nVidia logo, it sounds like you're using
their binary driver,
Okay, I'm a newbie - so this one should be simple?
I'm running QNX v6.2, I've downloaded and installed the XFree86 for QNX.
When I run "startx", I get the following:
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 11 March 2002
Hi,
Could you please tell me what the error could be?
That was the first run after the installation on an old PII Compaq PC.
I didn't change any of the proposals anaconda made
while the installation process.
Thanks
Jannis
_
Version of BSD is FreeBSD 4.7
video Trio32 1mb
--
Best regards,
Anton Maidykovski,Research Assistant.
Moscow State University, Physics Department,
Quantum Electronics Division,
Laboratory of Nonlinear Optics of Nanostructures
and Photonic Crystals. http://www.shg.ru
mailto:[EMAIL PROTECTED
an unexpected crash happen in Redhat 7.3, KDE 3.
Attached is hte /var/log/XFree86.9.log
thanks
laurence
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-1
Hi,
I have a problem that I can not fix. After startx I get the message "fatal
server error: no screens found". I think it is the video card, I found a
help request of someone else that has the same problem as I have and he has
the same video chip
(http://forum.mlug.org.au/bbshowpost.php?bbsubject
Hi. I am trying to run XFree86 on RedHat 9.0 using Virtual PC 5.2 for
Windows, but whenever I try to startx, I get the message below.
How do I configure XFree86 to recognize the VPC terminal? Thanks in advance.
Greg
[EMAIL PROTECTED] root]# more /var/log/XFree86.0.log
XFree86 Version 4.3.0 (Red
Saluta List,
I am running Red Hat 9 with rebooted my machine and my XServer is
not starting now(XFree86 Version 4.3.0 (Red Hat Linux Release
4.3.0-2))
I observed the /var/log/XFree86.0.log file very
carefully, the only important thing I observed is:
Fatal Server Error:
could not open default fo
I'm trying to build an intra Net with LTSP in a school (La Paz - Bolivia)
1 Server PIII 1.2 GH, Linux Mandrake 8.1, RAM 512 MB, HD 40 GB.
18 LessDisk terminals (BootDisk) 486, PI and PII
NET Topology = BUS Coaxial
I'm almost ready with this NET. but when a terminal is trying to get into
SFree
Hey Everybody,
So I'm taking a Linux class right now, but unfortunately, it doesn't
continue until next week, hence the question I pose to you today. Please
keep in mind, this might be a stupid newbie question...
I have installed Redhat Linux 8.0 on my Compaq Presario 1200 laptop. I
ins
Hi!
Big trouble. I can't load it at all. I couldn't load it in the
original release with redhat either, but then i read in some forum about people
with Radeon cards that mad it work with you newest release. This however didn't
work for me.
Hope you can help!
- Hampus
XFree86 Version 4.3.0 (R
Hello,
I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try
to start X I get the following error message.
Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in
Redhat as ATI Mobility U1. Is there anyone who has experienced this pr
Hello,
I am Installing Redhat Linux Version 9 on my E-machines M5310 laptop. Whenever I try
to start X I get the following error message.
Its an Athlon XP-M machine with an ATI Radeon IGP graphics card which auto detects in
Redhat as ATI Mobility U1. Is there anyone who has experienced this pr
Hi all
This seems to be a common problem, but i havent found a solution.
im using Redhat 9 on a compaq evo 1015v and a Radeon Mobility U1
During installation X was running (it was a graphical install) but after
installation i cant run X.
get the usual
(EE) No devices detected.
Fatal server e
Hi!
What should I do?
--
ICQ# 73217209
http://www.againsttcpa.com
http://www.stop1984.com
+++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++
100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz
XFree86.0.log
Description: Binary data
Hi,
I have done a fresh install on Red Hat Linux 7.3.
I am not able to get the GUI.
The following are the relevant files (attached):
1. XFree86.0.log
2. XF86Config-4 (as shown in the log)
3. Version of XFree86 "XFree86 Version 4.2.0"
4. Operating System "Red Hat Linux release 7.3 (Valhalla)"
5.
When I attempt to configure, I receive an error message about missing
libglide2x.so, not sure if it is related to my main problem of "no screens
found."
My intuition leads me to suspect this is something to do with my having a
video card in a AGP slot on a motherboard with an integrated video c
When I attempt to configure, I receive an error message about missing
libglide2x.so, not sure if it is related to my main problem of "no screens
found."
My intuition leads me to suspect this is something to do with my having a
video card in a AGP slot on a motherboard with an integrated video c
Hi!
I recently installed Turbolinux. When I try to
start it, log-in, and type startx, i get an error than no screens are found.
Unfortunatley, I've been unable to access my files that have the complete
error.
Please let me know if you need more info so I can
try to find it.
Thanks!
Phi
On Mon, 13 Jan 2003, Eiler, James A. wrote:
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 13 16:49:56 2003
> (EE) Unable to locate/open config file
Dead giveaway ;)
[mharris: perhaps this is another of those cases where the X server can
try to fix a few things and -- if they work -- g
ot;
Monitor"Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
End
Eiler, James A. [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 13, 2003 4:36 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [XFree86] Fatal server error: no screens found
More data.
I've done the
XFree86 -configure
and have a file called XF86Config.new (contents below).
On my QNX box, XF
On Mon, 13 Jan 2003, Eiler, James A. wrote:
> Never mind. I'm an idiot!
>
> After re-re-re-reading the installation notes at
> http://sourceforge.net/forum/forum.php?forum_id=163323
> I saw the part about copying the config file to
> /etc/X11/XF86Config-4.
Interesting - the notes also said to ru
A few more details would be helpful (monitor, graphic card, full XF86Config, full log)
However , from the parsing error and the fact that you are not using the standard
/etc/X11/XF86Config resp. /etc/X11/XF86Config-4 (which would be the RH 7.x version for
X 4.x.x) I
wonder whether you are not usin
ng the links in the above link.
HTH,
cyn
> -Original Message-
> From: Gregory Wolfson [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 03, 2003 9:32 PM
> To: [EMAIL PROTECTED]
> Subject: [XFree86] Fatal server error: no screens found
__
1R6/lib/X11/fonts/Speedo"
HTH,
cyn
> -Original Message-
> From: Rohit Khanna [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, June 25, 2003 4:43 PM
> To: [EMAIL PROTECTED]
> Subject: [XFree86] Fatal Server Error in X Server
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Mohammed:
It seems like there isn't a driver for this chipset. Is it very new?
If you look at the stuff at the end, U1 is never mentioned.
You might try the vesa driver, which should allow you to use X at some pretty
good resolutions, though probably not GL.
I'd guess that there might soon be
Hi saw
thanks for the suggestion, it worked!
Mohammed
From: Hacksaw <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Fatal server error: no screens found Date: Mon, 17
Nov 2003 20:54:57 -0500
Mohammed:
It seems like there isn't a driv
Sudip Shrestha
402.301.3940(c)
1017 Fairfax Rd., #17
Bellevue, NE 68005
XFree86.0.log
Description: Binary data
On Fri, Jan 16, 2004 at 05:07:55PM +0100, Jean-Luc SAVIO wrote:
> Bonjour !
>
> I've got some problems with a Linux Slackware 8.0 on a pc Nec with the
> same caracteristics than the nec.txt document.
>
> When I launch the command "startx" a " Fatal server error : No screens found"
> occures with
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.2.1 i386 [ELF]
Build Date: 13 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader p
On Sunday 21 March 2004 14:44, Johannes Hauber wrote:
> What should I do?
Considering the stack of primary devices X seems to find, I think you may want
to consider setting the BusID to one of them to force X to choose. Currently
it doesn't seem to be able to do that. Try adding
BusID"
On Sun, 21 Mar 2004, Pieter Hulshoff wrote:
> On Sunday 21 March 2004 14:44, Johannes Hauber wrote:
> > What should I do?
>
> Considering the stack of primary devices X seems to find, I think you may want
> to consider setting the BusID to one of them to force X to choose. Currently
> it doesn't s
The Video card and Monitor are
> 4. Operating System "Red Hat Linux release 7.3 (Valhalla)"
> 5. Video Hardware "ATI Fire GL E 1,64MB for DELL M992 (19" CRT)"
I noticed that I put it wrong in the attached files.
Thanks
__
Do you Yahoo!?
Respected sir,
I am new to Linux and when I try to start my x-window using startx, I
have been thrown with a hands full of messages.
The error message, from /var/log/XFree86.0.log, is makes me panic when
i am trying to host startx. If you could give me some suggestions,
that i could perform in a
I couldn't find where agpgart is loaded. It needs to be loaded for you video
card to work well.
[EMAIL PROTECTED] wrote:
> When I attempt to configure, I receive an error message about missing
> libglide2x.so, not sure if it is related to my main problem of "no screens
> found."
>
> My intuition
You're using the wrong driver. You have an ATI card, not an
NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver "nv"
with Driver "ati".
Mark.
On Sat, 29 Jan 2005 [EMAIL PROTECTED] wrote:
> When I attempt to configure, I receive an error message about missi
Mark - Thank you many times over. That simple change of "nv" to "ati" made
it work.
Bob
>You're using the wrong driver. You have an ATI card, not an
> NVIDIA card. In the /etc/X11/XF86Config-4 file, replace Driver "nv"
> with Driver "ati".
___
On Thu, 14 Apr 2005, Hubert Lemoigne wrote:
For my old computer, I have a Linux dual boot, and I can choose between :
1 - Suse 7.0 ( kernel 2.2.16, libc 6.1.3 and XFree 4.0.2 )
2 - Slackware 9.1 ( kernel 2.4.22, glibc 2.3.2, XFree 4.3.0 )
The PC hardware contains :
- Intel Pentium 133 Mhz
- Ram 64
On 9/3/05, P3 <[EMAIL PROTECTED]> wrote:
> I recently installed Turbolinux. When I try to start it, log-in, and type
> startx, i get an error than no screens are found. Unfortunatley, I've been
> unable to access my files that have the complete error.
>
> Please let me know if you need more inf
To whom it may concern,
I got the following answers when trying to configure a graphics card
under the specified XFree version:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window
System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If
I read the responses that I got but they didnt help me much. I know chmod but what
file am I supposed to check the permissions for and what should i set the permissions
to? ( i already checked /usr/X11R6/bin and i dont think thats the problem but i may be
wrong) thanks for the help!
-tim
_
1 - 100 of 123 matches
Mail list logo
