Hello,
Pls give me hhe detailed procedure you followd to compile
the kdrive. I'm also trying for the same. Is if that only the kdrive
server is sufficient to do every thing ??? Or does it require other
library and font files???
>
> Hi There
>
> I have tried unsuccessfully to compile
On Wednesday 13 November 2002 10:17 pm, Herman Buel wrote:
> Can RedHat Kickstart (Linux 7.3 & up) be used to install linux
> on a diskless Client machine ?
How can you install linux on a diskless machine? There is no disk to install
to...
Read about the linux terminal server project if you wan
> In <20021113220400.GB9077@rakefet>
> Shaul Karl <[EMAIL PROTECTED]> wrote:
>> On Wed, Nov 13, 2002, Egbert Eich <[EMAIL PROTECTED]> wrote:
>> > I don't see what special support is required for VLB bus.
>> > It should work like an ISA Bus system as long as you are
>> > not trying to ge
Hi!
How is the Radeon 9000(/pro) support ( for linux/x86 ) ?
That is the rv250 chip, right ?
Is radeon 9000 much/any faster than 8500 ?
Is the 8500 ( r200 ? ) better supported in xfree86/dri ?
I would not be asking these questions , if the HW support status
pages were good ;-)
Regards,
david
__
Can RedHat Kickstart (Linux 7.3 & up) be used to install linux on a diskless Client machine ?
Thanx, GMDo you Yahoo!?
U2 on LAUNCH - Exclusive medley & videos from Greatest Hits CD
On Wed, Nov 13, 2002, Egbert Eich <[EMAIL PROTECTED]> wrote:
>
> I don't see what special support is required for VLB bus.
> It should work like an ISA Bus system as long as you are
> not trying to get a VLB/PCI motherboard to work.
> We have no knowledge of VLB-PCI bridges therefore it is not
>
Hey,
I'm trying to cross compile X for use in a webpad. I've got all the tools
and libraries for the target host, but I am unable to come up with the
correct combination of variable changes to get it to use the cross
environment libs and tools. Whatever I do, it insists on compiling against
the
Title: RE: [Xpert]Problems with an old monitor and XFree86
maybe you do want to try inverting syncs...
but it might damage some of your hardware.
i dont take any response for doing so.
on the other hand it might be a problem
with the selected pixel clock.
if you do have a medium fast osci
On Wednesday 13 November 2002 10:23, you wrote:
> Harri Pasanen wrote:
> > So what is the actual difference between the failsafe and the
> > normal boot methods? I tried editing inittab to have the default
> > runlevel to be 3, and then typing startx, but that also froze X.
>
> Failsafe does not u
My guess would be that it's the adaptor. I've seen streaking and
ghosting with poor cables/adaptors.
Mark.
On Wed, 13 Nov 2002, Frederic Marchand wrote:
> Hello there!
>
> I'm having some issues with an old Apple "Two-page monochrome" monitor. It's a
> 21" fixed fr
Title: RE: [Xpert]Touchscreen Driver Mod xf86Dyna.c
If you already do have "imake"/"xmkmf" on your
machine, the just do a "make World" from your
~/xc project root directory and it will build
all (some 2-4 hours) and all the Makefiles.
For your project, avoid a "make clean" and you
will be ab
Hello.
I've build XFree 4.2.0 to enjoy AA fonts. My video card is "S3 Trio v2 DX/GX". Of
course, I couldn't find suitable driver.
I took s3 driver from distribution and made some changes
1) correct all PCI_CHIP_TRIO to PCI_CHIP_TRIOV2_DXGX
2) correct TRIO_RAMDAC from 0x8811 to 0x8901
3) correct p
Hi There
I have tried unsuccessfully to compile a small X using the Keith Packard KDRIVES.
I made a shadow directory as per built instructions but:
- Don't know where the built system was put on my drive - Don't know how to create a KDRIVE that uses the C&T 69030 chip - Don't know if / how a
> > Wouldn't tinyX be better suited than trying to pare X down? I believe
> > there are other graphic display tools available that are much smaller
> > than X depending on the functionality you need. Yes, X is big, but it
> > also does quite a lot.
>Actually I'm using the frame buffer server wh
Try the CVS and let me know how you get on.
Alan.
On Wed, Nov 13, 2002 at 12:13:28 -0500, Greg Stark wrote:
>
> I tried an old graphics card that was lying around and ran into a problem with
> the glint driver. This old message from January seems to indicate it's been
> noticed before but I gues
[I sent this message yesterday but it hasn't appeared on the mailing list and
I haven't received any notice about it being held or anything. Sorry if the
other eventually shows up and this is a duplicate]
Marc Aurele La France <[EMAIL PROTECTED]> writes:
> The log shows you are only using the Mat
I tried an old graphics card that was lying around and ran into a problem with
the glint driver. This old message from January seems to indicate it's been
noticed before but I guess the problem is still present in 4.2.1
I tried attachign the log file but that put the message over the limit for th
Dr Andrew C Aitchison wrote:
On Mon, 11 Nov 2002, Luugi Marsan wrote:
I thought about using the shadow framebuffer also. It seems like the
easiest way. I need to get myself more acquainted with shadow
framebuffer. For our new chip I need to specify an overlay surface and
an u
Hello there!
I'm having some issues with an old Apple "Two-page monochrome" monitor. It's a
21" fixed frequency greyscale. It got a 13w3 to DB15 adapter + a DB15 to DB9.
Here are my entry in my XF86Config:
This monitor got a 100Mhz dot clock
Section "Monitor"
Identifier "secondaire"
Ve
On Tue, 12 Nov 2002, Havoc Pennington wrote:
> Xft vs. core X fonts is not about AA fonts. You can configure Xft to
> never AA anything in fonts.conf. fontconfig/Xft are a full replacement
> font system, not just a hack to get AA.
>
Sorry for the newbie idiot butt-in.
On a side note. How does
Chris,
The elographics driver is part of the build but I have a sc3 compatible touch
controller that is incompatible with the elotouch driver. Dynapro works, but
is uncalibrated at this time because I am focusing on the whole dragging
problem. I have gotten the mmmtouch drivers to work (first
On Wednesday 13 November 2002 7:12 am, you wrote:
> On Tue, 12 Nov 2002 23:27, John Tapsell wrote:
> > On Tuesday 12 November 2002 10:35 am, Dr Andrew C Aitchison wrote:
> > > Two input groups doesn't make sense unless you have two foci.
> > > That means the concept "the window with focus" becomes
I don't see what special support is required for VLB bus.
It should work like an ISA Bus system as long as you are
not trying to get a VLB/PCI motherboard to work.
We have no knowledge of VLB-PCI bridges therefore it is not
unlikely that you run into trouble with these systems.
That you cannot get
Hi,
I think you will find the elographics driver in the xfree86 source tree at :
xc/programs/Xserver/hw/xfree86/input/elographics
This driver should be compiled as part of the standard build.
Chris.
Hi Chris,
I saw you are looking for information about a
touchscreen driver/module I myself am
24 matches
Mail list logo
