<<< Even without polarity reversal I very seldom get a yellow color.
That indicates larger particles size.>>> Is yellow bad? Marshall said
recently "go for the gold" I notice your spacing and immersion depth is
alot different than mine. Could this have something to do with the
difference in your cs and mine?

  Tom

--- Begin Message ---
Tom;

I just ran an evaluation batch using 36 vdc, 1" spacing, #14 wire, 3-1/2" in
water, with ploarity reversal every 60 seconds, 14 oz DW plus 2 oz seed of 10
ppm.CS.

After 60 min. the ppm = 8.0; after 80 min. the ppm = 11.5 and the CS is
colorless.  I know the ppm as I measure it with a spectrophotometer.

Even without polarity reversal  I very seldom get a yellow color. That indicates
larger particles size.

Is there another brand of distilled water available? For me to get yellow I have
to use deionized, demineralized water.

If I think of anything else I will post it.

Do you have a millampere meter in the circuit to measure the currents? That is
the quickest way to spot trouble.  A good DW will have an initial current of
about .26 ma
with 1" or 1-1/2" spacing and 3-1/2" in water, before adding the seed.

Robert




--- End Message ---