Trem: So you're differentiating the microsiemen meter (1:1) from the TDS meter, which you say should be converted at half the value...do I understand that correctly? They are functionally different? The distinction in meters, if I am correct, is that the microsiemen meter reads solution conductivity; and the tds reads just that - dissolved solids. Can you (or someone else) please send a link for reference, because in my cursory research thus far, I have heard different things - thanks. John
--- On Wed, 9/8/10, Trem <[email protected]> wrote: From: Trem <[email protected]> Subject: Re: CS>U/S to Silver Strength Reading To: [email protected] Date: Wednesday, September 8, 2010, 12:56 PM It's 1 to 1 TDS readings are 1/2 the PPM Trem ----- Original Message ----- From: "nessie" <[email protected]> To: <[email protected]> Sent: Wednesday, September 08, 2010 9:33 AM Subject: CS>U/S to Silver Strength Reading > Hi Group: > I think this has been discussed before. But I forget the > outcome. > Basically, what is the mathematical adjustment when going > from U/S (Microsemens) measurement > to PPM for measuring silver strength/concentration . Seems > to me the silver strength/concentration in PPm was half of the > microsemens reading? > Is that correct or was it 2/3 the microsemen reading? > thanks...nessie > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: > <mailto:[email protected]?subject=unsubscribe> > Archives: > http://www.mail-archive.com/[email protected]/maillist.html > > Off-Topic discussions: <mailto:[email protected]> > List Owner: Mike Devour <mailto:[email protected]> > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3121 - Release Date: 09/07/10 23:07:00
