Hi Mike,

I'm new to the group and new to the whole concept. I've been watching some
of your posts over the past few days, and all I can say is that I can't
wait to see the complete documentation on the SilverCell!

I just hope not to confuse it with some of the older information, that you
have deemed outdated yourself.

Thank you!

Robert

On Fri, Feb 24, 2012 at 2:04 PM, Mike Monett
<[email protected]>wrote:

> Bruce Anderson <[email protected]> wrote:
> >
> >Hi Mike:
> >Yes I would like to see a schematic and parts list, to see if I can
> >build it and afford it.  Social Security doesn't leave any room for
> >expensive
> >gadgets.
> >Best wishes:
> >Bruce A.
>
> That's great! My main concern was to make it simple and inexpensive enough
> so a single mom could afford to make and run it. This means no complex
> electronics, no stirrer, no automatic polarity reversal, and the Salt Test
> eliminates the need for a COM-100 unless you want one. A $2 Harbor Freight
> dmm would be nice, but what single mom would have the time to read the
> instructions with hungry kids pulling at her skirt?
>
> Fortunately, I found a trick to monitor the brewing process. When the
> silver ions reach the cathode, they plate out as silver metal. This forms
> tiny whiskers at the bottom of the U-channel that correspond to the ion
> concentration. When they reach about 1/8", simply swap the polarity and
> continue brewing. They will disappear from the new anode and appear on the
> new cathode. Again, the length corresponds to the silver ion concentration.
>
> When they have left the original electrode and reach about 1/8" inch on the
> new cathode, terminate the brew and pour the cs into a PETE bottle. I like
> Dasani Remineralized bottles that have been flushed with dw.
>
> When you follow this simple procedure, the cs will consistently measure
> between 35uS and 37uS, and the Salt Test shows the dispersion starting
> instantly and blocking objects behind the glass when it is complete. The
> Salt Test is only moderately accurate, but the SilverCell process gives
> such a high ion concentration that it doesn't matter. It is overwhelmingly
> above the 20uS minimum that is required to deal with the most virulent
> pathogens, such as Herpes Simplex and Herpes Zoster, so an ordinary cold or
> flu doesn't stand a chance.
>
> This high ion concentration means you can use sublingual absorption with
> good results. This eliminates any possiblilty of killing friendly fauna in
> the intestines, and totally eliminates any possibility of Argyria, since
> you spit the cs out at the end of 12 minutes. The other advantage is it
> kills the bacteria that cause dental cavities and gum disease, so you don't
> need to visit the dentist so often.
>
> So the process is simple, inexpensive, easy to operate, non-critical,
> self-timing, and produces the highest silver ion concentration of all the
> conventional cs generators anywhere. Also, you only need about 50ml instead
> of the 8oz glass that many people take, so you don't need to make 5 gallon
> batches and try to find something to store it in that won't contaminate the
> brew. This is a major problem, since the silver ions will combine with
> almost anything that leaches from the plastic or glass.
>
> The contamination problem is the only remaining issue that I'm not happy
> with, but I think I may have stumbled on a solution and will try it this
> weekend.
>
> There is a bit more information on my web site at
>
> http://www.silvercentral.org/
>
> If I can get the contamination problem solved, I will be able to post the
> assembly and operating instructions. I think you will find it well within
> your budget, and very easy to build.
>
> More soon....
>
> Mike M.
>
>
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
>  Rules and Instructions: http://www.silverlist.org
>
> Unsubscribe:
>  <mailto:[email protected]?subject=unsubscribe>
> Archives:
>  http://www.mail-archive.com/[email protected]/maillist.html
>
> Off-Topic discussions: <mailto:[email protected]>
> List Owner: Mike Devour <mailto:[email protected]>
>
>
>