Hello,

I have measured "D.I." water at 4.0+ PPM TDS.  Santa Fe, Water King brand.

I removed a DI cartridge from my still feedwater because it was putting 
stuff in the water.

DI water not uncommonly still has bacteria in it; a possible pyrogen even 
if killed by the heat of generation or the Ag sol itself.  It grows in the 
system.

"Free silver ions" are not a colloid.

James Osbourne Holmes
[email protected]


-----Original Message-----
From:   Fred [SMTP:[email protected]]
Sent:   Thursday, October 21, 1999 11:44 PM
To:     [email protected]
Subject:        Re: CS>Article on HV colloidal silver
Importance:     High

Deborah, I have never played with HV for the generation of Cs
as I see no need to utilize HV when just a few volts will strip
ions of silver from the electrode.  It is like using a canon to trim
your hedge! Dangerous and gross overkill. As to their reference
that "only steam distilled water must be used to prevent producing
poisons",  seems to imply to me that their alternate "water" was
from a ditch! To produce poisons (in quantity to be considered
dangerous) you must adulturate or salt your water, in order to
acheive 100's of PPM of "bad" compounds! Silver is clearly safe,
so the better your water the better your product.

As previously stated, steam distilled water is often poor quality
water, with  upto 15PPM of contaminates, due to the entrainment
of the residue water in the steam. Deionized water is never above
1PPM, being a much more controllable process and thus is a
better medium to use, to get free silver ions rather then compounds.

f...@health2us


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to:
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>