Hulda Clark / Don Croft type designs below
this is the same type of circuit with the same functional output
http://www.stenulson.net/althealth/cspulse.htm
Ive made this and found that my brew was getting "gold" coloured
It made the brew pretty fast and I wasn't happy with it.
After experimenting with pulsed DC circuits and current controlled DC, I've
stuck with Current controlled sticking to 0.2ma per Square inch. including
pulsed DC and controlling current simultaneously!
I have tried the suggested 1ma per square inch and it was too much for my
brewing setup since I do not stir for fear of introducing contaminants and
also i found that too vigorous a stir ruined the brew anyway, Trem also
found similar results and did a lot a work to get the stirring work.
I use a LM334 IC, It operates within 1v and 40V, is well behaved with
minimal circuitry, and can compensate for temperature and drift.
http://www.ti.com/lit/ds/symlink/lm134.pdf
I hope this helps.
Peace to all
Asif.
-----Original Message-----
From: Ode Coyote
Sent: Sunday, August 03, 2014 12:37 PM
To: silver-list@eskimo.com
Subject: Re: CS>New pulse generator design
The high voltage will impart a higher velocity to the ions being emitted
and the pulse width limit averaged current.
I don't know that that will affect electrode deposits in any way other
than maybe blowing them off into the water or perhaps have those
byproducts form in the water rather than on the electrodes.
Try it and see what happens.
Ode
On 8/2/2014 8:19 PM, John Popelish wrote:
On 08/02/2014 08:01 PM, asifnathekar wrote:
Any advantages over regular DC current controlled
designs Or people who use zappers at 25khz frequencies
such as don croft/ Hulda Clark designs
At this point, any advantages are unproved. I was frustrated with the
silver oxide and electroplated solver particles produced with DC systems.
I am hoping for input about whether or not these effects can be finessed
by using brief, high voltage pulses, separated by relative long resting
periods, that let the atomic oxygen, at the cathode, disperse and the
ejected silver atoms (or clusters) to diffuse away from the electrodes.
I got the idea from pulse battery charging circuits. I noticed that they
altered the surface texture of the battery plates, relative to pure DC
charging systems.
But, at this point, I make no definite claims about whether this generator
produces anything different than batteries. This is what I am trying to
discover.
I'll try to find info on the Hulda Clark design you mention.
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
Archives:
http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
List Owner: Mike Devour <mailto:mdev...@eskimo.com>