David, The convention is to use the current density on the electrode you are interested in, in this case the anode.
The current density is the current divided by the wetted area of the electrode. My small generators have a wetted area of 45mm x 2mm dia = 283 sq mm. I limit the current to 0.5mA, so the current density is 0.0018 mA per sq mm. Electrodes have 'hot spots' at sharp edges which draw more current than the rest. Regards, Ivan. ----- Original Message ----- From: "blue_eyes" <[email protected]> To: <[email protected]> Sent: Wednesday, 2 August 2000 10:17 Subject: Re: CS>Electrode Surface Area > Fellow CS'ers, > > Of all the responses I received directly (1), there was one that > stood out from all the rest. It indicated the total surface area of > both electrodes is used to calculate the current density. There > was no mention of the reasoning behind the conclusion, so I am > still looking for more of the bits and pieces of the answer. > > It seems to me,though,since the reason we care about low current > density is the apparent association with smaller silver particles > being released from the anode, we don't care what the current > density is at the cathode. That is to say, does the current > density at the cathode effect the particle size as much as the > density at the anode seems to? > > If it does not, then it makes sense to me to figure the current > density on less than 100% of the *anode* wetted surface area and > perhaps in the 50% to 70% zone. > > What be the thoughts of others? > > Still drinking, > > Daivd > > -- > E-mail: [email protected] > Fax to: 1-253-681-1133 > ICQ#... 44960928 > -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>

