Hi Carol;

Using the meter to test the battery is good practice, but the best use of  the
meter is to change scale to milliampers and monitor the current will the CS is
brewing, if you are using constant voltage generation.

When you first start, if you will record the initial cell current,  it is THE 
best
indicator of the quality of the DW. The lower the current the better the water.
With Wal-Mart (from Hazelwood MO) is generally get .2 ma, the same with Walgreen
Drug Store DW. Then when the current reaches abut 4 ma the process is finished.

If you are running constant current then you need to monitor the voltage across
the cell and note the voltage when you think the time is finished. At its point
you will have to let the CS stand over night to see if if goes yellow. if it 
does
make another run and stop at a higher voltage or about 15 minutes sooner. Repeat
until you get what you want.

"Ole Bob"



--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>