Dear Ole Bob, Thanks for the useful info. Yes, I am checking the current throughout the process. However I cannot tell you when we stopped yet, as we started with 3 batteries, and changed to 2 half way because the current was rising too rapidly. So the next run we shall start with 2 and get more accurate readings. The CS was good though, when we used a torch in the dark we had T.E. and the CS didn't turn yellow overnight. I take it that yellow is not good.
On 16 Aug 2000, at 15:59, Robert L. Berger wrote: > Using the meter to test the battery is good > practice, but the best use of the meter is > to change scale to milliampers and monitor > the current will the CS is brewing, if you > are using constant voltage generation. > Blessings Carol -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
