I would say you have made between 15 and 20 ppm Steve. I base this prediction upon your description (although you don't state the volume of water), and...experience.
Ivan. ----- Original Message ----- From: "Steve Young" <you...@konnections.com> To: "Silver List" <silver-list@eskimo.com> Sent: Sunday, 3 September 2000 16:22 Subject: CS Strength To the list CS experts: I would like your opinion on the approximate PPM for the following CS: Started with 1.1 uS distilled water as measured by Hanna PWT (model HI 98308) Constant current of 1.0 Ma. DC throughout the entire run. Starting voltage to the electrodes = 150 VDC Ending voltage after 3 1/3 hours = 8 VDC. This would be a resistance of 8K. Ending uS of 19.1 after sitting for a day so agglomeration effects would settle down Constant stirring at 30 RPM Faint TE which can only be seen in a dark room, so I believe the particles are quite small Electrodes are both #12 silver wire spaced 1.75 inch and immersed 3.75 inches So, ladies and gentlemen, about what strength CS have I made? What is the basis for your estimate? Thanks for your help, --Steve Young -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
