Most neon sign places have use units they will sell for very little, or in many cases will give them to you. Tell them you are going to build a jacob Ladder. Then when you get home build one. Then tear it down and use it for the CS.
Marshall "V. Richter" wrote: > Thanks Robert, > By the way, is a GFI going to be a problem? It doesn't seem like it would > since the current to ground should still be zero if all goes as planned. I > just wanted to make sure. There is a neon sign place in my town. I'll > check there first. A new transformer wouldn't be out of my reach > financially. > > Vince Richter > > ----- Original Message ----- > From: "Robert Bartell" <rbart...@drfast.net> > To: <silver-list@eskimo.com> > Sent: Sunday, November 05, 2000 3:45 PM > Subject: Re: CS>HVAC/ARC Transformer source? > > > Hi Vince, > > Any manufacturer of Neon signs can get you one. Code now requires the > > transformers to have ground fault interruptors for certification. The > older > > ones didn't have them and you can probably find a good deal around for a > > used one. > > New ones are around $100 - $120 retail. Used or old style should be about > > $35 to $40, Good Luck and good hunting! :Robert Bartell Oh, by the way, > > thanks to "ole" Bob on this list for this info! > > > > ----- Original Message ----- > > From: V. Richter <cvin...@ala.net> > > To: <silver-list@eskimo.com> > > Sent: Saturday, November 04, 2000 10:30 PM > > Subject: CS>HVAC/ARC Transformer source? > > > > > > > To all HVAC/ARC method folks, > > > What is a source on the internet of Transformers in the 120/15,000V > range? > > > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: silver-list@eskimo.com > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <mdev...@eskimo.com>