Well, crud, I was thinking of getting a TDS to see if measuring dissolved solids could tell me what the H*** is going on here---my DW (various brands) reads fine on the PWT, testing at .3 to .9 uS for different jugs, but the CS is turning yellow. So it seems that there is something in the water that does not show up tested with a PWT. It looks like the TDS isn't accurate enough to tell me anything useful though, after reading what Trem and Ken have to say about it. My Hanna PWT was purchased from Trem at silvergen, and came with some very helpful extra instructions and info. paula ----- Original Message ----- From: "Ode Coyote" <coyote...@earthlink.net>
> Measures in PPM...resolution not very good...typically reads half of > what a PWT reads in microsiemens. PPM of dissolved solids is not quite the > same as the accepted [on this list] result of mutliplying PWT microsiemens > by 1.2 to get an approximated PPM of , specifically, silver ions as per > Trems comparisons to atomic absorption spectrometer tests at a range of > around 20 PPM [that right Trem?] > My Hanna [DIST1] version of this > meter now occupies the trash can. > CSG-TDS > > $24.95 -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
