There actually is no point at which tyndall starts showing up. It is a continuous process, and if I remember right changes by the 3rd power of particle size. So as you get smaller the tyndall goes down very rapidly. If you look at a large amount of pure water, it will exhibit a blue tyndall due to this, as will water vapor in the sky.
Thus if you have ions, the amount of tyndall from them will be negligible, but present. If you have two atoms forming a particle, it is still going to be so small as to contribute negligible tyndall. My guess is the the particles formed by sitting are very very small and contributing little to the tyndall. Marshall Ode Coyote wrote: > I have run across a strange TE anomolie. > > It is normal for conductivity to drop as particles form since particles don't > contribute to conductivity and they form out of ions over time. > I had previously thought that these converted ions would all contribute to a > stronger TE but here's the thing... > > I made several batches using the latest evolution of the Series 2 silverpuppy > that metered out at around 22 uS with a PWT when done. [I use thermal > convection stirring which does heat the water some] > After sitting for a week or so, re-metering yielded 12 uS but the TE had not > changed significantly from virtually none. > > I ran an experiment to document the effects of heat on conductivity where a > PWT is concerned. [Result: Over a 30 deg F change from 70 to 100 as worst > case high temp, the difference was 2.6 uS. I'm calling it 3 uS..so, that 22 > uS will be known as 19 uS to account for temperature distortion as worst case] > > So, starting at 19 uS dropping to 12 uS and no real change in TE...what > happened? > Is there such a thing as a non conductive "particle" that's too small for > visible light to reflect off of? > Or is the water itself doing something strange that throws the PWT off that > heat soak doesn't explain? > > Anybody have a clue? > Ode > > At 09:36 AM 11/21/2003 -0500, you wrote: > >>>> > > Hi, Jonathan and Ode! > > Thanks for your input. > > The electrodes remained in the > vessel throughout the run. This > was done because it was a > control experiment for weak- > current electrolysis. > > On reflection, I can identify at > contamination or extraneous > factors, though there are reasons > to discount each of them. > > 1) The process took place in an > environment with large amounts of > chalk dust generated every day, i.e. > a school. But chalk dust is mostly > large particulate. On the other hand, > some portion of it is small enough > to collect in people's lungs and > make them cough. > > 2) The process took place in a > place illuminated by fluorescent > lights. And Svedberg discovered that > UV will sinter metallic silver in > water into CS. On the other hand, > the glass tube in a fluorescent light > blocks the large amounts of UV > generated inside the tube. > > 3)The process took place in a > place that received direct sunlight > for much of the day. On the other > hand, the panes of window glass > block out most of the UV in > sunlight. > > So it still remains a mystery to me. > > One thing I have learned, though, is > a greater respect for the Tyndall Effect. > I also wonder why it is not exploited > more, especially as a quantitative > metric. > > We have sophisticated electronics to > measure pH, conductivity, total dissolved > solids, temperature, time control and > so forth. > > Tyndallometry was put on a quantitative > basis in the age of Victorian and > Edwardian science, long before the > availability of electronics. The light > sources back then we heliostats and > carbon arc lamps, which are vastly > inferior compared to the laser diode > pointers affordable by all of us today. > > In fact, there are now green laser > diode pointers on the market that > might make it possible, when used > with a red laser diode, for ordinary > people to do Tyndall spectroscopy. > > Do-it-yourself Tyndallometry and > Tyndall spectroscopy would give us > a handle on particle size distribution > and concentrations of particulate > surface area. If I am not mistaken, > these have important clinical > implications. And after all, our > primary goal is enhancement of > health. > > Well, thank you for your comments. > They have already given me a lot > of food for thought. > > Best wishes, > > Matthew > > <<<< > > -- The silver-list is a moderated forum for discussion of colloidal silver. > Instructions for unsubscribing may be found at: http://silverlist.org > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour

