Tony Graziano wrote: > > Patton is good and supported worldwide.
The Patton SmartNodes are very powerful and provide a lot of advanced features, but be warned that they have a VERY steep learning curve, and can be very daunting for a new user. Basically they are supplied in a non-working state, and you have to write a configuration script or fiddle with the horribly designed web interface to make them work in the way you want. They are NOT managed gateways in SipXecs, despite what the wiki says. A good place to start with them is the sample config script supplied on the wiki. Note that unless you're in the USA, you'll have to download the appropriate tone config from the Patton website, otherwise you'll have problems with disconnect tones not working. I don't know how this compares to other gateways, as I've only ever used Patton SmartNodes, but I'm sure there must be others that a far simpler to use. Probably the most appropriate Patton for you would be the Patton SmartNode 4114, which has 4 FXO's and no FXS. Regards, Keith. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
