The spreadsheet is slick. The configs in our wiki pages came out of frustration with the config notes pages on Patton's web site.
http://sipx-wiki.calivia.com/index.php/HowTo_configure_Patton_SmartNode_SIP_Gateway_with_sipX Thanks, Mike -----Original Message----- From: Jim Canfield [mailto:jcanfi...@emstar.com] Sent: Wednesday, July 01, 2009 10:45 PM To: Picher, Michael Cc: Keith Gearty; Tony Graziano; jcas...@activenetwerx.com; sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Gateway Suggestion for testing I just wanted to chime in here: You guys may find the configuration spreadsheet available from Patton a huge resource. It's written for the Astra 800, but the same principals apply. http://www.patton.com/resources/files/snconfig_aastra800.xls Also, look at the configuration library on Patton's site http://www.patton.com/voip/confignotes.asp Hope this helps, -Jim On Tue, Jun 30, 2009 at 4:42 PM, Picher, Michael<mpic...@cmctechgroup.com> wrote: > Sorry if this is a couple days late... we do have some good config > examples in the Wiki for the Patton that can help tremendously. > > Mike > > -----Original Message----- > From: sipx-users-boun...@list.sipfoundry.org > [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Keith > Gearty > Sent: Monday, June 29, 2009 10:47 AM > To: Tony Graziano > Cc: sipx-users@list.sipfoundry.org; jcas...@activenetwerx.com > Subject: Re: [sipx-users] Gateway Suggestion for testing > > Tony Graziano wrote: > >> >> Patton is good and supported worldwide. > > The Patton SmartNodes are very powerful and provide a lot of advanced > features, but be warned that they have a VERY steep learning curve, and > can be very daunting for a new user. Basically they are supplied in a > non-working state, and you have to write a configuration script or > fiddle with the horribly designed web interface to make them work in the > > way you want. They are NOT managed gateways in SipXecs, despite what > the wiki says. A good place to start with them is the sample config > script supplied on the wiki. > > Note that unless you're in the USA, you'll have to download the > appropriate tone config from the Patton website, otherwise you'll have > problems with disconnect tones not working. > > I don't know how this compares to other gateways, as I've only ever used > > Patton SmartNodes, but I'm sure there must be others that a far simpler > to use. Probably the most appropriate Patton for you would be the > Patton SmartNode 4114, which has 4 FXO's and no FXS. > > Regards, > Keith. > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
