Thanks Mike,
Patton also sent me two more 5.x configs for the 4960. One with and
one without registration (attached). I tested the later and it seems
to be working fine on the SIP side. I'll polish them up a bit and put
them on the wiki.
-Jim
On Thu, Jul 2, 2009 at 2:56 PM, Picher, Michael<mpic...@cmctechgroup.com> wrote:
> Here is a 5.2 config for a 4960... I've "genericized" it.
>
> -----Original Message-----
> From: Jim Canfield [mailto:jcanfi...@emstar.com]
> Sent: Thursday, July 02, 2009 9:32 AM
> To: Picher, Michael
> Cc: Keith Gearty; Tony Graziano; jcas...@activenetwerx.com;
> sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] Gateway Suggestion for testing
>
> Also, I'm currently working on a 5.x config for the 4960. Once I
> have a functional version, I'll be sure to create a tab (and update
> others) on the spreadsheet and add it too the wiki. Would any of you
> happen to have a working 5.x 4960 config for SipX? I just created a
> ticket with Patton, perhaps they may be able to help convert the 4.x
> template.
>
> -Jim
>
> On Thu, Jul 2, 2009 at 3:48 AM, Picher, Michael<mpic...@cmctechgroup.com>
> wrote:
>> The spreadsheet is slick.
>>
>> The configs in our wiki pages came out of frustration with the config notes
>> pages on Patton's web site.
>>
>> http://sipx-wiki.calivia.com/index.php/HowTo_configure_Patton_SmartNode_SIP_Gateway_with_sipX
>>
>> Thanks,
>> Mike
>>
>> -----Original Message-----
>> From: Jim Canfield [mailto:jcanfi...@emstar.com]
>> Sent: Wednesday, July 01, 2009 10:45 PM
>> To: Picher, Michael
>> Cc: Keith Gearty; Tony Graziano; jcas...@activenetwerx.com;
>> sipx-users@list.sipfoundry.org
>> Subject: Re: [sipx-users] Gateway Suggestion for testing
>>
>> I just wanted to chime in here:
>>
>> You guys may find the configuration spreadsheet available from Patton
>> a huge resource. It's written for the Astra 800, but the same
>> principals apply.
>>
>> http://www.patton.com/resources/files/snconfig_aastra800.xls
>>
>> Also, look at the configuration library on Patton's site
>>
>> http://www.patton.com/voip/confignotes.asp
>>
>> Hope this helps,
>>
>> -Jim
>>
>>
>> On Tue, Jun 30, 2009 at 4:42 PM, Picher,
>> Michael<mpic...@cmctechgroup.com> wrote:
>>> Sorry if this is a couple days late... we do have some good config
>>> examples in the Wiki for the Patton that can help tremendously.
>>>
>>> Mike
>>>
>>> -----Original Message-----
>>> From: sipx-users-boun...@list.sipfoundry.org
>>> [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Keith
>>> Gearty
>>> Sent: Monday, June 29, 2009 10:47 AM
>>> To: Tony Graziano
>>> Cc: sipx-users@list.sipfoundry.org; jcas...@activenetwerx.com
>>> Subject: Re: [sipx-users] Gateway Suggestion for testing
>>>
>>> Tony Graziano wrote:
>>>
>>>>
>>>> Patton is good and supported worldwide.
>>>
>>> The Patton SmartNodes are very powerful and provide a lot of advanced
>>> features, but be warned that they have a VERY steep learning curve, and
>>> can be very daunting for a new user. Basically they are supplied in a
>>> non-working state, and you have to write a configuration script or
>>> fiddle with the horribly designed web interface to make them work in the
>>>
>>> way you want. They are NOT managed gateways in SipXecs, despite what
>>> the wiki says. A good place to start with them is the sample config
>>> script supplied on the wiki.
>>>
>>> Note that unless you're in the USA, you'll have to download the
>>> appropriate tone config from the Patton website, otherwise you'll have
>>> problems with disconnect tones not working.
>>>
>>> I don't know how this compares to other gateways, as I've only ever used
>>>
>>> Patton SmartNodes, but I'm sure there must be others that a far simpler
>>> to use. Probably the most appropriate Patton for you would be the
>>> Patton SmartNode 4114, which has 4 FXO's and no FXS.
>>>
>>> Regards,
>>> Keith.
>>> _______________________________________________
>>> sipx-users mailing list sipx-users@list.sipfoundry.org
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users
>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>>> sipXecs IP PBX -- http://www.sipfoundry.org/
>>> _______________________________________________
>>> sipx-users mailing list sipx-users@list.sipfoundry.org
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users
>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>>> sipXecs IP PBX -- http://www.sipfoundry.org/
>>>
>>
>
cli version 3.20
dns-relay
dns-client server XXX.XXX.XXX.XXX #### Set the DNS server address
here ####
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
pcm law-select uLaw
profile napt NAPT
profile ppp default
profile call-progress-tone US_Dialtone
play 1 1000 350 -13 440 -13
profile call-progress-tone US_Alertingtone
play 1 1000 440 -19 480 -19
pause 2 3000
profile call-progress-tone US_Busytone
play 1 500 480 -24 620 -24
pause 2 500
profile call-progress-tone US_Releasetone
play 1 250 480 -24 620 -24
pause 2 250
profile tone-set default
profile tone-set US
map call-progress-tone dial-tone US_Dialtone
map call-progress-tone ringback-tone US_Alertingtone
map call-progress-tone busy-tone US_Busytone
map call-progress-tone release-tone US_Releasetone
map call-progress-tone congestion-tone US_Busytone
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
profile pstn default
profile sip default
profile dhcp-server DHCP
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
profile aaa default
method 1 local
method 2 none
context ip router
interface eth0
ipaddress XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX #### Set the IP address and
Netmask of the Smartnode here ####
use profile napt NAPT
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface eth1
ipaddress 192.168.1.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use profile DHCP
route 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX WAN #### This is where you add in
your default route, the gateway address ####
context cs switch
routing-table called-e164 RT_FROM_BRI
route T3 dest-interface IF_SIP
interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-interface IF_ISDN
remote xxx.xxx.xxx.xxx #### Remote address of Provider (IP/Hostname) ####
interface isdn IF_ISDN
route call dest-interface IF_SIP
use profile tone-set US
context cs switch
no shutdown
authentication-service AUTH_SVC
username xxx password xxxxx
location-service LOC_VOIP
domain 1 xxx.xxx.xxx.xxx
identity xxx #USER ACCOUNT#
authentication outbound
authenticate 1 authentication-service AUTH_SVC
registration outbound
register auto
context sip-gateway GW_SIP
interface IF_VOIP
bind interface eth1 context router port 5060
context sip-gateway GW_SIP
bind location-service LOC_VOIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface eth1 router
no shutdown
port e1t1 0 0
port-type e1
clock auto
framing crc4
encapsulation q921
q921
uni-side auto
encapsulation q931
q931
protocol dms-100
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_ISDN_0 switch
port e1t1 0 0
no shutdown
port e1t1 0 0
port-type t1
clock master
linecode b8zs
framing esf
encapsulation q921
q921
uni-side auto
encapsulation q931
q931
protocol ni2
uni-side net
bchan-number-order ascending
max-calls 11
encapsulation cc-isdn
bind interface IF_ISDN switch
port e1t1 0 0
no shutdown
cli version 3.20
dns-client server 10.10.4.10
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
pcm law-select uLaw
profile napt NAPT_WAN
profile ppp default
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
profile pstn default
profile sip default
profile dhcp-server DHCPS_LAN
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
profile aaa default
method 1 local
method 2 none
context ip router
interface WAN
ipaddress dhcp
use profile napt NAPT_WAN
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface LAN
ipaddress 192.168.1.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use profile DHCPS_LAN
context cs switch
routing-table called-e164 RT_TO_SIPX_EXTENSION
route default dest-interface IF_SIP MAP_SIPX_EXTENSION
mapping-table called-e164 to called-e164 MAP_SIPX_EXTENSION
map default to xxxx ***(SIPx
Extension to route all incoming calls to)***
interface isdn IF_ISDN
route call dest-table RT_TO_SIPX_EXTENSION
interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-interface IF_ISDN
remote xxx.xxx.xxx.xxx ***( Domain
name of SIPx server)***
context cs switch
no shutdown
context sip-gateway GW_SIP
interface IF_GW_SIP
bind interface WAN context router port 5060
context sip-gateway GW_SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface WAN router
no shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface LAN router
no shutdown
port e1t1 0 0
port-type t1
clock master
linecode b8zs
framing esf
encapsulation q921
q921
uni-side auto
encapsulation q931
q931
protocol ni2
uni-side net
bchan-number-order ascending
max-calls 11
encapsulation cc-isdn
bind interface IF_ISDN switch
port e1t1 0 0
no shutdown
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
