Hi!I was under the impression that if i did not direct calls at SBC
level and did not assign dids as aliases to users,
that the autoattendant defined in the dialplan would catch all calls and
direct them
to which ever attendants that i had selected(based on schedule).
Is this not true?
Sending all calls via sbc to "operator" works but not assigning a
destination at sbc
sends a relayed error respons to itsp. i.e call is not caught by dial
plan autoattendant.
11:17:08.568740 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17),
length 504) 88.xxx.43.xxx.AZENT-BREDBAND-NET.host.songnetworks.se.5080>
xxx.xxx.se.sip: SIP, length: 476
SIP/2.0 404 Not found
Via: SIP/2.0/UDP 80.83.208.29:5060;branch=z9hG4bK28297067
From: "0701111111"<sip:0701111...@80.xxx.208.xxx>;tag=tv3130538c
To:<sip:0775111...@88.xxx.43.xxx:5080>
Call-ID:74f5fb97466189f947d1fdba73b1b...@80.xxx.208.xxx
CSeq: 102 INVITE
Server: sipXecs/4.2.0 sipXecs/sipxbridge (Linux)
Supported: replaces
Contact:<sip:~~id~bri...@88.xxx.43.xxx:5080;transport=udp>
Reason: ~~id~bridge;cause=213;text="Relayed Error Response"
Content-Length: 0
Before i get into details/logs/snapshots. Is this how it is supposed to
work with autoattendants in the dial plan?
*Vänliga Hälsningar/Best Regards*
/Ola Samuelson
/
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/