Hi Todd, I haven't tested the airBridge with StarOS access point. Without testing I couldn't tell you where could be the problem? I will check with my support team and update you as well.
Seeni sB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Support(at)inet2000.com Sent: Wednesday, June 04, 2003 3:19 AM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] Fixed Rate Speeds Hi. I don't think I have a problem, necessarily. What I'm asking SmartBridges is why setting the radio at 2Mbit doesn't keep it there. It still switches up to whatever speed it figures it can do. All the other 802.11b gear I've used can be fixed at 1, 2, 5.5 or 11Mbit and it'll stay at that speed, unless of course you have auto-fallback turned on. - Todd Chamberlain From: "Marlon Schafer (509-982-2181)" <[EMAIL PROTECTED]> Subject: Re: [smartBridges] Fixed Rate Speeds > Ahhh. You have: > A: Water in something > B: Interference > C: multipath > D: You are as dense as I was this week and managed to put all 4 ap's in town > on the same channel! sigh..... > > In that order. > > Could be something else but I'd be surprized if it is. > > marlon > > From: "Support(at)inet2000.com" <[EMAIL PROTECTED]> > > Perhaps I didn't make my question clear. When I look at the > > connections from my AccessPoint (StarOS) it shows my airBridge > > client's connection changing from 1 to 2 to 11 Mbit, even though > > the airBridge is fixed at 2 Mbit. Every time the airBridge changes > > speeds, there is a temporary delay in data transfers, so I wanted > > to set the speed and fix it there. However, the AccessPoint seems > > to think it keeps switching up and down in speed anyway. > > - Todd Chamberlain > > > > From: "Seeni" <[EMAIL PROTECTED]> > > > How did you see from the Access Point?. airBridge operates only at the > > > set speed. AutoFallRate will achieve better throughput and it is > > > recommended. > > > > > > Seeni > > > > > > Support(at)inet2000.com > > > Hello. Do you have an answer to this? I want to know why > > > when I fix the speed at 1 or 2 Mbit (and I turn off the autorate) > > > why the Access Point still shows the airBridge Outdoor client > > > jumping from 1 all the way to 11 Mbit? > > > - Todd > > > > > > ----- Original Message ----- > > > From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Thursday, May 29, 2003 11:24 AM > > > Subject: RE: [smartBridges] Fixed Rate Speeds > > > > > > > > > > The set speed is to determine what is the maximum limit of throughput > > > > you can have on a link, Have the AutoFallBack Rate enabled so that if > > > > the set speed is not achieved then the connection does not get dropped > > > > off, > > > > > > > > Vasu > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > > Support(at)inet2000.com > > > > Sent: Friday, May 30, 2003 1:16 AM > > > > To: '[EMAIL PROTECTED]' > > > > Subject: [smartBridges] Fixed Rate Speeds > > > > > > > > When I set my airBridge Outdoor to 1 or 2 Mbit fixed > > > > rate, and turn off the autorate fallback, my Access Point > > > > still shows it changing up and down from 1 to 11 Mbit. > > > > Is this a problem with my StarOS Access Point or with > > > > the SmartBridge not staying at it's set speed? > > > > - Todd > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
