The set speed is to determine what is the maximum limit of throughput you can have on a link, Have the AutoFallBack Rate enabled so that if the set speed is not achieved then the connection does not get dropped off,
Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Support(at)inet2000.com Sent: Friday, May 30, 2003 1:16 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Fixed Rate Speeds When I set my airBridge Outdoor to 1 or 2 Mbit fixed rate, and turn off the autorate fallback, my Access Point still shows it changing up and down from 1 to 11 Mbit. Is this a problem with my StarOS Access Point or with the SmartBridge not staying at it's set speed? - Todd The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
