Cuz you need to wait for the UPS to die JH ----- Original Message ----- From: "Stuart Pierce" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, August 30, 2003 10:00 AM Subject: Re: [smartBridges] help with APPO problem
> If you can just flip the breaker at the bottom to turn the power off, why do you need to climg to reset the units ? > > Or am I not caught up on emails. > > ;) > > ---------- Original Message ---------------------------------- > From: "Gloria Vester" <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > Date: Sat, 23 Aug 2003 13:39:56 -0500 > > >Marlon, > >My AC runs up the water tower from a breaker at the base of the tower. There is an AC outlet in my NEMA box with the UPS plugged into it, a power strip into that, with all the power supplies and the D-Link switch plugged into that. All the cat-5 is outdoor rated, shielded and gel filled, all cables tested with a cable tester after being built up on the tower. As for lightning arrestors, we haven't had any sign of lightning or a drop of rain in months - this is north Texas where rain doesn't exist from June until October. I don't see how I would run a power cord down the tower, it just doesn't seem possible. We can try moving the cat-5 cables around to different ports on the switch to see if it is one port on the switch that is failing, but since we have had two different units fail now with the same exact problem and they are on different ports, I don't think that would tell us much. > > > >Any more ideas - I am always willing to listen and try different things, > >Gloria > > ----- Original Message ----- > > From: Marlon Schafer (509-982-2181) > > To: [EMAIL PROTECTED] > > Sent: Saturday, August 23, 2003 1:00 PM > > Subject: Re: [smartBridges] help with APPO problem > > > > > > First off, run a power cord to the bottom of the tower for a bit so you can just unplug it to reset everything ;-). > > <<snipped>> > --- > [This E-mail scanned for viruses by Declude Virus By Avolve.net] > > ANNOUNCEMENT > WISPCON IV - Can You Ping Me Now? Good! > October 27-29, 2003 - Dallas Texas > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > WISP 101 Boot Camp > September 29-October 3, 2003 - Chicago, Illinois > http://www.part-15.org/train/wisp/101.html > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org ANNOUNCEMENT WISPCON IV - Can You Ping Me Now? Good! October 27-29, 2003 - Dallas Texas http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm WISP 101 Boot Camp September 29-October 3, 2003 - Chicago, Illinois http://www.part-15.org/train/wisp/101.html The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
