If you can just flip the breaker at the bottom to turn the power off, why do you need to climg to reset the units ?
Or am I not caught up on emails. ;) ---------- Original Message ---------------------------------- From: "Gloria Vester" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Sat, 23 Aug 2003 13:39:56 -0500 >Marlon, >My AC runs up the water tower from a breaker at the base of the tower. There is an >AC outlet in my NEMA box with the UPS plugged into it, a power strip into that, with >all the power supplies and the D-Link switch plugged into that. All the cat-5 is >outdoor rated, shielded and gel filled, all cables tested with a cable tester after >being built up on the tower. As for lightning arrestors, we haven't had any sign of >lightning or a drop of rain in months - this is north Texas where rain doesn't exist >from June until October. I don't see how I would run a power cord down the tower, it >just doesn't seem possible. We can try moving the cat-5 cables around to different >ports on the switch to see if it is one port on the switch that is failing, but since >we have had two different units fail now with the same exact problem and they are on >different ports, I don't think that would tell us much. > >Any more ideas - I am always willing to listen and try different things, >Gloria > ----- Original Message ----- > From: Marlon Schafer (509-982-2181) > To: [EMAIL PROTECTED] > Sent: Saturday, August 23, 2003 1:00 PM > Subject: Re: [smartBridges] help with APPO problem > > > First off, run a power cord to the bottom of the tower for a bit so you can just > unplug it to reset everything ;-). <<snipped>> --- [This E-mail scanned for viruses by Declude Virus By Avolve.net] ANNOUNCEMENT WISPCON IV - Can You Ping Me Now? Good! October 27-29, 2003 - Dallas Texas http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm WISP 101 Boot Camp September 29-October 3, 2003 - Chicago, Illinois http://www.part-15.org/train/wisp/101.html The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
