Joe, You have all our attention. We agree with the higher power requirement and working towards designing it in our next generation radio platforms. Unfortunately it is not easy to make this change in the existing radio card being used in all our products.
This is slightly OT. I know many of you try to make long shots to cover the large areas. But having seen many different deployment strategies, I think smaller cell site architecture is better. Thanks. Nimesh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Email Sent: Friday, November 07, 2003 6:32 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Amp Question Stuart I know you are not responding to my post, but I made one similar I personally am trying to get smartBridges attention, because from what I am hearing the radios are not performing as well as they could. I like smartBridges and have tried to stay the course, but with the testing we are doing I am not satisfied with the power the radios are putting out. Whether amps would help or not, I personally do not know, but I am going to try one smartBridges is coming out with the XO and XO2, why not up the power so we could use small antennas on the CPe(this is the big cost). My observations joe k -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Stuart Pierce Sent: Thursday, November 06, 2003 1:31 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Amp Question Teletronics had their all-in-one AP hotspot with a poe powered amp inside. But this is a Smartbridges list. ---------- Original Message ---------------------------------- From: Rick Kunze <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Thu, 06 Nov 2003 10:00:06 -0800 >Not sure exactly what you mean here, as the amp is on the RF side, not the >Ethernet side. What I need is one that can go between an ABO and an >antenna, outdoors, where the LMR run is only a couple feet. > >Rk > >At 08:49 AM 11/6/2003, you wrote: >>We've been thinking about carying the Luxul POE amp. But we were not sure >>what the interest level is. Here's a good time to ask. Is there any >>interest in a POE powered amp that would need to be protected from the weather? >> >>Mike B >>Electro-comm >> >>Patrick wrote: >>>Earl, >>>Does the RF Linx have POE power? I can't seem to find any from them that >>>aren't power over coax.... >>>>----- Original Message ----- >>>>From: <mailto:[EMAIL PROTECTED]>Earl Campbell >>>>To: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>>>Sent: Wednesday, November 05, 2003 2:52 PM >>>>Subject: Re: [smartBridges] Amp Question >>>> >>>>Amps can be a curse also. The repeater becomes what we call an alligator >>>>mouth. Everyone in 30 mi radius can hear it bit the AP can't hear the >>>>CPE's. So be careful with amps and I recommend RF Linx. Good price and >>>>they have filtering in both the TX and RX side. >>>>Earl UpHi.net >>>> >>>> >>>>-------Original Message------- >>>> >>>>From: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>>>Date: Wednesday, November 05, 2003 01:41:24 PM >>>>To: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] >>>>Subject: Re: [smartBridges] Amp Question >>>> >>>>Not entirely correct. The amp must be part of a CERTIFIED SYSTEM. A number >>>>of manufacturers provide same--YDI and others. >>>> >>>>JH >>>>----- Original Message ----- >>>>From: "Curt Perryman" >>>><<mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]> >>>>To: <<mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]> >>>>Sent: Wednesday, November 05, 2003 11:29 AM >>>>Subject: Re: [smartBridges] Amp Question >>>> >>>> >>>> > Amps are not authorized by the FCC and in fact are specifically >>>> prohibited >>>> > in the Rules. Use of one would void the type acceptance. >>>> > >>>> > At 10:14 AM 11/05/2003 -0500, you wrote: >>>> > >I want to put an amp on a pop I have for testing a possible project. >>>> Does >>>> > >anyone know an amp that isn't powered over the rf-cable like the ydi >>>>outdoor >>>> > >units? I have an APPO up the tower and wonder how people are putting the >>>> > >amp in between the radio and antenna. Are any poe powered? I wouldn't >>>>mind >>>> > >making another cat5 run, I just don't want to run rf-cable and >>>> induce the >>>> > >loss. >>>> > > >>>> > >Thanks, >>>> > >Patrick >>>> > > >>>> > > >>>> > >The PART-15.ORG smartBridges Discussion List >>>> > >To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >>>> (in the body type subscribe >>>> > >smartBridges <yournickname> >>>> > >To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >>>> (in the body type unsubscribe >>>> > >smartBridges) >>>> > >Archives: <http://archives.part-15.org>http://archives.part-15.org >>>> > >>>> > The PART-15.ORG smartBridges Discussion List >>>> > To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in >>>> the body type subscribe >>>>smartBridges <yournickname> >>>> > To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] >>>> (in the body type unsubscribe >>>>smartBridges) >>>> > Archives: <http://archives.part-15.org>http://archives.part-15.org >>>> >>>>The PART-15.ORG smartBridges Discussion List >>>>To Join: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in >>>>the body type subscribe smartBridges <yournickname> >>>>To Remove: <mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED] (in >>>>the body type unsubscribe smartBridges) >>>>Archives: <http://archives.part-15.org>http://archives.part-15.org >>>>. >>>> >>>> >>>> >>>>____________________________________________________ >>>><http://www.incredimail.com/redir.asp?ad_id=309&lang=9> >>>>420f4d5.gif >>>><http://www.incredimail.com/redir.asp?ad_id=309&lang=9> IncrediMail - >>>>Email has finally evolved - >>>><http://www.incredimail.com/redir.asp?ad_id=309&lang=9>Click Here >> >> > > --- [This E-mail scanned for viruses by Declude Virus By Avolve.net] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
