That is about how long it takes me to get my 132 inch span RES model
ready to fly after I get to the field. The model fits in my van
ready to fly except that the outer wing panels have to be plugged in
and taped on. The model was designed with a 3 piece wing with a 48
inch center wing that will fit in my van when bolted to the fuselage.
If someone has a winch set up, it takes me longer that that to get
from my van to the winch. If Brian Smith is there, he often has my
model assembled by the time I get out of the van. :)
Chuck
At 01:29 AM 12/3/2007, you wrote:
Everybody has good points but listen to this. I place my 2 or 3
DLG's in the back of my minivan, assembled and ready to fly. The one
I want to fly first is charging as I drive to the field. I get to
the field, put my card on the board and am flying 180 seconds later.
Admitedly, sometimes there is very little low level lift, but other than that,
Beat that!
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
