On Wed, Feb 20, 2008 at 11:30:30PM +0000, Adam Retter wrote: > On Wed, Feb 20, 2008 at 11:18 PM, Stuart Henderson <[EMAIL PROTECTED]> wrote: > > On 2008/02/20 23:08, Adam Retter wrote: > > > The console output over COM0 from the net4801 is below, but basically > > > I have no idea what "Unknown error: code 60" (from pxeboot?) means? > > > > 60 is ETIMEDOUT, according to OpenBSD's intro(2). iirc the normal OS > > error codes are used in the boot loader. are you aware of any network > > problems, bad cables or duplex mismatch maybe? > > Erm nope im not aware of any problems, the cables are all new and work > for network traffic otherwise. The net4801 is connected to a Netgear > 8-port 10/100/1000Mbit switch and the FreeBSD machine is also > connected to the switch. Using the same physical setup with its > current OpenBSD 3.7 operating system, I am able to SSH into the > net4801 and browse the web etc (its used as a F/W and Router). > > Hmm, anything I can do to find out why its timing out?
You already tftp'ed the loader and just NFS is failing, so you have to search for NFS related problems. Is is correct that your nfs path is named tftp:/bsd ? I don't know if the OpenBSD loader can handle DNS requests, so you might want to try with an IP address as well. -- B.Walter http://www.bwct.de http://www.fizon.de [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
