Thanks you all your repies. I am still very interested in any testimonies about the Speedtouch used in Germany. The net did not show any traces of another setup like mine. Hard to believe.
Yvon TANGUY <[EMAIL PROTECTED]> writes: I know this (found it in the archive already) > There're 3 possible problems causing this : > > - Your ISP does not respond to your config requests. This cannot be solved > by the driver :-) Are you talking about the Internet Provider (Tiscali in my case) or the DSL provider (which is Deutsche Telekom) ? Since the VPI/VCI settings depend on the DSL provider (isn't it ?) and I can change the VPI/VCI settings anyway I want, or even replace pppoatm3 by "sleep 30" without any noticable changes I believe my ISP has not yet been contacted at all. The problem is between me an Deutsche Telekom isn't it ? > - You may have done a mistake in user/password between the adsl peer file > and the chap/pap-secrets file. For the same reasons I don't think thats the cause. > - Sometimes pppoa3 fails to remove its pid/lock file in /var/run/ > Then check your daemon.log, and if you see lines where pppoa3 is > waiting like this : I do the the "Ok, the previous instance seems to quit" line. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
