Hello Craig, We use SprinkCad. One of the 1st things I figured out how to do was to move tags where I wanted them.
Best regards, Charles Thurston CoastalFire mailto:[EMAIL PROTECTED] Wednesday, February 14, 2007, 3:25:21 PM, you wrote: > Question for the automated package users..... > I have been told by several contracts that they can not manipulate where > the program places text, nodes and other type information on the > drawings. This has often resulted in some pretty crappy looking > drawings and drawings that are hard to review, especially when text is > stacked on top of each other to create a blob on the drawings. Now I > don't' know if it's really the software or just careless cad operators > (notice I'm not using the term "designer" here). Seems that more > companies are using less skilled designers and just using cad drafters > to produce layouts. Cheaper labor but a poor product if design is the > product you sell. > Also had the same issue with the automated calcs. The logic of order > just didn't exist. Going from a node in the middle of the system to > another somewhere else and another somewhere else with no rhyme or > reason makes for a miserably tedious review. > So the question is, is the problem in the software or the operators? > Craig L. Prahl, CET > Fire Protection Group > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 > Direct - 864.599.4102 > Fax - 864.599.8439 > [EMAIL PROTECTED] > http://www.lg.com > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum -- _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
