If you have a 16k sq ft attic, I assume the footprint is greater than 12k sq
ft.  Is this Type VA construction?  What is the construction type?  That may
drive it right into a 13 system by the building code. 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Todd Williams
- work
Sent: Tuesday, July 03, 2007 2:36 PM
To: [email protected]
Subject: 13R in wolfs clothing?

I am reviewing a set of plans for a 4 story plus partial basement motel. The
basement and first floor are designed per 13, the wood truss attic is
sprinklered, the sprinklers for the upper floors are fed from a combination
standpipe and the sprinklers on the floors are designed per NFPA 13R. The
contractor claims that the building is 13R and the areas outside the
dwelling units are protected per 13 in accordance with the section of 13R.
To me this doesn't sit well. 
There is 28000 sqft of "incidental" space (excluding 16000 sqft
attic) and 48000 sqft of residential. Does this really count as a 13R? Is
there (or should there be) some reasonable limits as to the amount of space
outside a dwelling unit before it is kicked up to the next level of
protection? I can't find anything in 13R that would not allow this
arrangement. The local building code gives no guidance. 
Any thoughts?

Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
860-535-2080
www.fpdc.com 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

__________ NOD32 2376 (20070703) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to