In a light hazard situation, and the doors are self-closing, the
contractor can assume only the design within the room - no sprinklers
outside.  They can then point to the owner and declare that the doors
are not to be propped open.

On the other hand, if the engineer of record knows that self closing
doors are not going to be closing, he can indicate that on the
construction documents and forbid the use of the room design method
unless the extra heads outside the room are calculated.

If the contractor is effectively the engineer of record (design-build),
then they can make the same determination - or not.

I wonder why an owner would have self-closing doors AND keep them
propped open?  Seems a waste of money on door closers.  Maybe the ME
screwed up the HVAC design...

Mark A. Sornsin, PE 
Fire Protection Engineer 
Ulteig Engineers, Inc. 
Fargo, ND  
701.280.8591
[EMAIL PROTECTED] 
 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, December 21, 2007 9:14 AM
To: [email protected]
Subject: Room Design

When you are performing an inspection of a system calculated using the
room design approach, how do you handle all of the doors that are
propped open?

Or, how do you calculate these systems?  Do you always go with the extra
two sprinklers and assume the doors will be held open?

Bill Brooks

William N. Brooks, P.E.
Brooks Fire Protection Engineering Inc.
372 Wilett Drive
Severna Park, MD 21146
410-544-3620 Phone
410-544-3032 FAX
412-400-6528 Cell

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to