Jason,
I follow the second way.
Dewayne 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Norton
Sent: Friday, December 21, 2007 12:19 PM
To: [email protected]
Subject: RE: Room Design

While we are on this topic...We have a small debate in our office regarding the 
density/area method.  Some say to ignore the walls completely through the 
entire calculation process, just like the example that NFPA 13 describes (which 
works great for a the typical warehouse with equal sprinkler spacing). Others 
say ignore the walls with regard to the general location of the remote area 
(1.2 rectangle) and then use the walls to determine the actual square footage 
of the remote area and to determine the actual gpm required from each sprinkler 
within the remote area. What do you all say? 

Jason

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Sornsin
Sent: Friday, December 21, 2007 8:35 AM
To: [email protected]
Subject: RE: Room Design

I can't see a good reason for NFPA to nix the room design method - I've seen 
enough locations where the self-closing doors actually remain closed. But I 
can't see a contractor willingly avoid the room design either - not without 
potentially losing more work to the other guy.

A classic example of why NFPA 13 is a minimum standard; and why (many times) 
there should be a third party taking responsibility for the design. Say, like 
an engineer of record for instance - one that knows what's going on, that is.

Mark 
 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of å... ....
Sent: Friday, December 21, 2007 9:53 AM
To: [email protected]
Subject: Room Design

propped open doors?
propped open self-closing doors?
that IS reality.

that is why the Room Design method
  has to wake up and smell the coffee.
not that the Room Design method is bad in intention.
  one, two,  three sprinklers kabosh most LH/OH fires.
just that there are some bad assumptions
  to the Room Design method.
  Like doors being closed.


scot deal
excelsior fire
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field) 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field) 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to