Is there a code requirement to provide hose valves in a parking garage in a 2-story?
Would it make sense to toss em in the stairs and connect only to an FDC to effect a dry standpipe ? FDT water delivery would answer your question on how long it will take to trip/fill/and spurt water outa the ITC. If you depend on slapping an accelerator on after you flunk your first time trial, you may find out that its not enough and it's a little late and a lot expensive to slap in that other DPV, bulk, re-calc, resubmit, watch 30 days of calendar time elapse, and meet the opening date. We always toss in a low air supervisory switch and use tank-mounted air supplies. Even if they don't bother to hook up the switch, it was there and (in court) you can point out that you made heroic efforts to save them from themselves but they didn't take advantage of them, so your property carrier doesn't have to pay to thaw out/replace the dry system after a false trip, fire, whatever. After all, they'd have had plenty of time to respond to the warning if they'd bothered to hook it up, and this whole thing wouldn't have happened- so the fault rests on the Owner or someone other than yourself. As Ken points out to me, "You pay me a lot of money to observe 'Yeah, that'll sound good in court'" when I stray from a good decision. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, February 01, 2008 9:52 AM To: [email protected] Subject: RE: Parking Garage Sprinkler System *** Depending on where your riser is in relation to the remote part of your system you may have to have multiple systems to deal with the time factor. It's a bit hard to determine without actually seeing everything you're seeing. Make the electrical guy move his lights, tell him fire protection is more critical. Maybe he will move, maybe you will have to work around him. Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com at the outlet of most remote 1 1/2 in. hose stations should be 65 psi for hydraulically designed systems, so I think my fire pump head should be at least 80 psi? What do you think about this fire pump head, do you think it is low, high or good? ANSWER: That can only be answered once you've performed your calculations. Start there and make adjustments accordingly but depending on the configuration of the system, that might be close or a bit low to start with. Another thing to consider is will your fire department use the 1 1/2" fire hoses or will they want to bring their own hoses. If they prefer to provide their own, will they be 1 1/2" or 2 1/2" hoses? Here in the States we don't usually provide hoses since most people would hurt themselves trying to act like a fireman. We usually provide hose connections for the fire department to use. It is a matter of whether you intend to have these hoses handled by non-fire fighters or professional fire fighters. Plus hoses left in places like this _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
