As per NFPA 1 Section 13.2.2.2 & also NFPA 5000 Section 55.4.1:
New buildings shall be equipped with a Class I standpipe system installed in
accordance with NFPA 14, Standard for the Installation of Standpipe and Hose
Systems, where any of the following conditions exist:
(1) The building is more than three stories above grade.
(2) The building is more than 50 ft (15 m) above grade and contains
intermediate stories or balconies.
(3) The building is more than one story below grade.
(4) The building is more than 20 ft (6100 mm) below grade.
I would like to know the logic for such requirements, in my opinion, the
logics for each item is as below:
(1) The building is more than three stories above grade.
MY LOGIC: "It is difficult for fire fighters to pull hose to floors above
grade more than three stories as it will become heavy weight when water is
flowing, that's the logic for three stories limit in NFPA 1 and NFPA 500 also
30 ft. limit in IBC section 905.3.1.
(2) The building is more than 50 ft (15 m) above grade and contains
intermediate stories or balconies.
MY LOGIC: As the building has balconies, so fire fighters can stand there &
tolerate to pull longer hose & that's the logic for 50 ft. limit.
(3) The building is more than one story below grade.
I Don't know why one story limit, why not three stories below grade?
(4) The building is more than 20 ft (6100 mm) below grade.
I Don't know why!
Thanks for sharing your valuable knowledge & experiences in advance.
Reza
---------------------------------
Never miss a thing. Make Yahoo your homepage.
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)