Hello Todd,

No room in the existing building for a pump room. Suction will be
coming from a city supply line now. THEN we get to run a 6 inch supply
line 500 feet across the building and half way down the building to
the existing riser manifold. They were going to put in a "Full Load"
generator when this started but that has gone away now.

Friday, February 15, 2008, 2:07:39 PM, you wrote:

> In general, I would say diesel as well, but each situation is 
> different. If this is a retrofit, look at the installation issues. It 
> may be better to install a pump inside the existing building and put 
> a generator outside as opposed to a new building/addition to house 
> the diesel. Where are they going to be getting the suction water from?

> At 07:32 AM 2/15/2008, you wrote:
>>Hello sprinklerforum,
>>
>>   I am looking for opinions on installing a Diesel fire pump Vs installing
>>   an Electric fire pump and Gen Set. I have a location that is being
>>   cut loose from the "Site Wide" fire pump loop now owned by others.
>>
>>--
>>Best regards,
>>  Charles                          mailto:[EMAIL PROTECTED]
>>Coastal Fire Protection
>>
>>_______________________________________________
>>Sprinklerforum mailing list
>>[email protected]
>>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>>
>>To Unsubscribe, send an email to:[EMAIL PROTECTED]
>>(Put the word unsubscribe in the subject field)

> Todd G. Williams, PE
> Fire Protection Design/Consulting
> Stonington, Connecticut
> www.fpdc.com
> 860.535.2080  
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

> To Unsubscribe, send an email
> to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)


-- 
Best regards,
 Charles                            mailto:[EMAIL PROTECTED]

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to